English GB
Jesmonite AC100 is the ideal resin to bring your creativity to life. It is an alternative to polyester or polyurethane for all types of decorative pieces. Ideal for use with silicone moulds.
Acrylic pigment for Jesmonite resin. Apply a maximum of 2% by weight. AC100 resin produces the most vivid colours as it has a higher acrylic resin content.
Pigments are sold by weight and each colour has a different density, so it may appear that some colours are only half full. This is particularly true of white, oxides and terracotta.
Jesmonite AC84 is a two-component water-based acrylic resin, ideal for creating stone-finished pieces from moulds. Its high resistance and detail fidelity allow for durable and realistic results, with a texture that simulates natural stone, but without the actual weight. It is easy to use, customisable with pigments and safe as it does not emit toxic vapours. Perfect for sculptors, designers and creators of artistic and decorative pieces.
Case containing all official pigments Jesmonite in 10 g presentations, for AC100, AC300 and AC84
Includes:
The first 100% biodegradable resin of plant origin! Resin based on linseed oil and a natural activator based on sugar beet molasses: an innovative, safe and sustainable way to create your own decorative, utilitarian and artistic objects. Reslin® is easy and creative to use, with no harmful substances! Your pieces will be ready in 60 minutes at a low temperature in a convection oven. These Reslin® sets contain enough material to create multiple Reslin® objects. They are ideal for both small and large projects. Create endless possibilities with Reslin®!
Neon-based mineral pigments. Perfect for use with Jesmonite AC100/AC200/AC300. You can unleash your creativity with truly striking colours (neon effect).
Please note: does not glow in the dark! No fluorescent pigments.
Very fine mineral powder in beautiful, bright pearlescent colours. Mix the mica powder with Reslin® to give your objects a shiny pearlescent effect.
Format: 9 g
Mix this glow-in-the-dark pigment with Reslin® and create your own glow-in-the-dark artwork. It provides a glow-in-the-dark effect when properly charged and used in a dark room.
Format: 10 g
Natural glitter made from mica slate grain, which does not contain plastic. You can sprinkle it into your mould or mix it with your Reslin® to add a beautiful shine to your creation.
15 g format
Reslin® Tint, highly pigmented, solvent-based and with excellent coverage. Add a few drops of Reslin® Ink to the Reslin® mixture to colour it. You will obtain very vivid colours with excellent coverage. Size: 20 ml.
Whatsapp
English GB
Composite adhesive/fixative spray – TensorGrip TC42 500 ml, high‑performance adhesive for infusion and RTM holding reinforcement fibres without impacting surface finish or integrity.
Shipping 24/48 h
Secure payment
Easy returns
TensorGrip® TC42 is a high‑performance, solvent‑based polymer adhesive spray formulated for composite infusion and RTM (Resin Transfer Molding) processes. Delivered in a pressurized aerosol canister, TC42 is engineered to hold reinforcing fibres in place during resin infusion without compromising the surface finish or structural integrity of the finished part.
Ensure the bonding surfaces are clean, dry and free of dust, oil or contaminants. Spray from ~10 – 20 cm with even coverage. Allow the adhesive to become tacky before placing reinforcement materials.
Basic consumables kit for your first resin infusion or small projects (1 m²) with vacuum bag, tacky tape, tubes, peelply, and Flowmesh drainage mesh.
Peel Ply 84 g/m² – 120 cm wide (linear meter) for easy separation of fiberglass or carbon fiber from other consumables, leaving a rough surface ideal for bonding.
Tacky Tape 140 ºC grey 15 ml sealing tape for vacuum and resin infusion processes, providing reliable airtight sealing of bagging systems.
High-performance two-component epoxy resin for fiberglass, carbon fiber and aramid. Ideal for structural laminates, marine applications, automotive industry and technical parts. Excellent impregnation, high mechanical strength and long-lasting professional finish.
SR 8100 epoxy resin with SD 8824 hardener (Standard) specifically for resin infusion.
Tubular vacuum bag 50 micron, orange color, 30 cm wide, perfect for resin infusion and vacuum processes. Sold in linear meters.
Tubular infusion inlet mesh (2x7.5 cm) in yellow, ideal for vacuum processes and uniform resin distribution in composite manufacturing.
COMPLEX 3-in-1 infusion mesh (150x100 cm) combining flow media, perforated film, and peel ply alternative, reducing time, resin usage, and labor.
Basic consumables kit for your first resin infusion or small projects (1 m²) with vacuum bag, tacky tape, tubes, peelply, and Flowmesh drainage mesh.
Clear LDPE infusion and vacuum hose 10 mm inner / 12 mm outer, ideal for resin infusion and vacuum processes. Maximum temperature 60 °C. Sold per linear meter.
Soric SF core 2 mm × 127 cm (linear meter) for infusion and composite laminates, ideal as a resin flow medium and separation layer.
Flowmesh Light infusion mesh (125 cm), flexible and easy to use, ideal for complex surfaces with guided resin flow direction.
Peel Ply 84 g/m² – 120 cm wide (linear meter) for easy separation of fiberglass or carbon fiber from other consumables, leaving a rough surface ideal for bonding.
Tacky Tape 140 ºC grey 15 ml sealing tape for vacuum and resin infusion processes, providing reliable airtight sealing of bagging systems.
Mini resin trap for composites, compact and economical, 400 ml capacity, with a customizable lid for different hose diameters.
155 mm wooden sticks for mixing resins (Jesmonite, epoxy, polyester) and craft materials. Pack of 25 pieces.
12 mm infusion pyramid – anti‑adhesive fitting to connect resin distribution systems to inlet and outlet hoses. Reusable and durable.
Infusion hose clamp – sturdy tool for quickly and securely shutting off resin or air flow in composite infusion systems.
6-9 mm vacuum hose for infusion, ideal for small systems. Reduces resin consumption thanks to its smaller inner diameter.
Blue perforated polyethylene release film 28 µ, 150 cm wide, ideal for liquid resin infusion. Sold in linear meters.
12 mm low-density polyethylene spiral tube for resin distribution in infusion processes. Flexible, durable, and easy to install.
Paraffined styrene with 5% paraffin content, ideal as an additive for unsaturated polyester resins. This product eliminates surface tackiness after curing, making sanding and finishing fiberglass parts easier.
It allows converting Gel-Coat into Top-Coat and is especially useful for lamination, repair and surfboard glassing. Recommended dosage is approximately 3% by weight of the resin before adding the catalyst.
65 micron vacuum bag, 200 cm width (folded to 1 m), designed for resin infusion and vacuum compaction in epoxy, polyester, and composite applications.
Metal ring roller 18 × 80 mm for smooth application of resins, paints and other liquid materials. Recommended cleaning with acetone or Rhodiasolv RDPE.
Useful piece for dividing the resin distribution circuit in infusion
7 mm male barb with 1/4″ thread for vacuum and infusion systems. Ideal for connecting hoses and fittings (1 unit).
Fiberglass tape 200 g/m², 5 cm wide, ideal for localized reinforcements in laminates. Sold per linear meter, cut to project requirements.
Composite adhesive/fixative spray – TensorGrip TC42 500 ml, high‑performance adhesive for infusion and RTM holding reinforcement fibres without impacting surface finish or integrity.
Català
Español
Português PT
