Jesmonite kit AC100

Jesmonite spray varnish for parts. Matt finish

Easy to apply. 150 ml format

Pack containing everything you need to start working with JESMONITE AC100:

JESMONITE, 1 silicone mould and pigments. 

The Jesmonite Sealer – Acrylic SEALER with satin finish is a water-based acrylic protective coating specially formulated for Jesmonite surfaces. It provides water resistance, stain protection, and an elegant satin finish that enhances the natural color of your pieces. Ideal for decorative objects, trays, pots, and handcrafted creations.

Complete resin application kit (polyester, epoxy, Jesmonite) with PP cups, latex gloves, double brush and wooden mixing sticks.

Silicone stick for mixing all types of resins. Very easy to clean and reuse to avoid waste.

Acrylic sealant with GLOSS finish for Jesmonite to protect parts made with JesThe Jesmonite Sealer – Acrylic GLOSS SEALER with glossy finish is a water-based acrylic sealer designed to protect and enhance Jesmonite surfaces. Provides water and stain resistance with an intense glossy finish that highlights colors and details. Ideal for trays, pots, decorative objects, and artistic creations.monite AC100, AC200 and AC300.

Thickening additive "Thixotropic" for resin referencesJesmonite, AC100, AC200, AC300. Prevents sagging. Saves time and material. Recommended mixing ratio of 2 to 6 grams per kilogram of mixture.

Case containing all official pigments Jesmonite in 10 g presentations, for AC100, AC300 and AC84

Includes: 

• 2 x 10 g Black 
• 2 x 10 g White
• 1 x 10 g Bright Yellow
• 1 x 10 g Rust Yellow
• 1 x 10 g Orange
• 1 x 10 g Terracotta
• 1 x 10 g Coade (brown)
• 1 x 10 g Green
• 1 x 10 g Blue
• 1 x 10 g Lilac
• 1 x 10 g Pink
• 1 x 10 g Bright Red
• 1 x 10 g Rust Red

The vibrating platform is extremely helpful for removing bubbles from moulds, achieving a homogeneous mixture and improving the results of all your pieces with Jesmonite. You can also use it when making silicone moulds to ensure that the silicone reaches even the smallest corners.

The silver flakes are so fine and soft and can be mixed excellently with Jesmonite or other resins. Achieve an elegant and striking end result!

Perfect for use with JESMONITE AC100

5g format

Case with 10 officialJesmonitepigments in 50g packs, for AC100, AC300 and AC84

Includes: 

1 x 50 g Black 

1 x 50 g White

1 x 50 g Bright Yellow

1 x 50 g Rust Yellow

1 x 50 g Terracotta

1 x 50 g Coade (coffee)

1 x 50 g Green

1 x 50 g Blue

1 x 50 g Bright Red

1 x 50 g Rust Red

Metallic filler for Jesmonite systems and polyester resins. Available in bronze, copper or brass. High-purity metal particles for realistic metallic finishes with authentic metal effect.

Jesmonite spray varnish for parts. Gloss finish. 

Easy to apply. 150 ml format.

Pack containing everything you need to start working with JESMONITE AC100:

JESMONITE, 1 silicone mould and pigments. 

155 mm wooden sticks for mixing resins (Jesmonite, epoxy, polyester) and craft materials. Pack of 25 pieces.

Glitter chips are as fine as sand, but also slightly thicker, up to about 3 mm, and can be mixed excellently with Jesmonite or other resins. Glitter chips give your creation an elegant and eye-catching finish!

Perfect for use with JESMONITE AC100

Format 30g

Silclear 22 AB is an addition-cure silicone for mould making, formulated to produce highly accurate reproductions and withstand numerous demoulding cycles. Its low viscosity, excellent tear resistance and dimensional stability make it an ideal choice for prototyping, part reproduction and the manufacture of durable moulds.

300 g/m² chopped strand fiberglass is a high-strength reinforcement material ideal for use with polyester, vinyl ester, and epoxy resins. Perfect for lamination, repair, and manufacturing in marine, automotive, and construction applications. Excellent conformability, easy wet-out, and uniform finish.

60x40cm silicone mat, ideal for working with any resin, easy to clean.

Alginate is a material for quick moulds, using water, and suitable for reproducing body parts as it is non-toxic and can come into contact with the skin.

Release wax spray in a 400 ml aerosol format, ideal for facilitating demolding when working with polyester resin, epoxy resin, PMMA and polyurethanes. It provides a clean and efficient release, preventing the part from sticking to the mold and improving the final finish.

Its formula offers excellent anti-adhesive properties, is CFC-free, and allows fast, uniform and economical application. Perfect for mold manufacturing and resin casting in both professional environments and DIY projects.

6 mm chopped fiberglass strands for reinforcement of resins, fillers, composites and Jesmonite. Improves mechanical strength and durability. Available in 1 kg and 20 kg formats.