JESMO CLEAN 500ml - MOULD CLEANER

Glitter chips are as fine as sand, but also slightly thicker, up to about 3 mm, and can be mixed excellently with Jesmonite or other resins. Glitter chips give your creation an elegant and eye-catching finish!

Perfect for use with JESMONITE AC100

Format 30g

The vibrating platform is extremely helpful for removing bubbles from moulds, achieving a homogeneous mixture and improving the results of all your pieces with Jesmonite. You can also use it when making silicone moulds to ensure that the silicone reaches even the smallest corners.

Pack containing everything you need to start working with JESMONITE AC100:

JESMONITE, 1 silicone mould and pigments. 

Jesmonite spray varnish for parts. Matt finish

Easy to apply. 150 ml format

60x40cm silicone mat, ideal for working with any resin, easy to clean.

The silver flakes are so fine and soft and can be mixed excellently with Jesmonite or other resins. Achieve an elegant and striking end result!

Perfect for use with JESMONITE AC100

5g format

Pack containing everything you need to start working with JESMONITE AC100:

JESMONITE, 1 silicone mould and pigments. 

Case with 10 officialJesmonitepigments in 50g packs, for AC100, AC300 and AC84

Includes: 

1 x 50 g Black 

1 x 50 g White

1 x 50 g Bright Yellow

1 x 50 g Rust Yellow

1 x 50 g Terracotta

1 x 50 g Coade (coffee)

1 x 50 g Green

1 x 50 g Blue

1 x 50 g Bright Red

1 x 50 g Rust Red

Pack containing everything you need to start working with JESMONITE AC100:

JESMONITE, 1 silicone mould and pigments. 

Neon-based mineral pigments. Perfect for use with Jesmonite AC100/AC200/AC300. You can unleash your creativity with truly striking colours (neon effect).

Please note: does not glow in the dark! No fluorescent pigments.

Pack containing everything you need to start working with JESMONITE AC100:

JESMONITE, 1 silicone mould and pigments. 

Silicone stick for mixing all types of resins. Very easy to clean and reuse to avoid waste.

Jesmonite AC84 is a two-component water-based acrylic resin, ideal for creating stone-finished pieces from moulds. Its high resistance and detail fidelity allow for durable and realistic results, with a texture that simulates natural stone, but without the actual weight. It is easy to use, customisable with pigments and safe as it does not emit toxic vapours. Perfect for sculptors, designers and creators of artistic and decorative pieces.

Jesmonitee acrylic sealant to protect parts made with Jesmonite AC100, AC200 and AC300.

Acrylic sealant with GLOSS finish for Jesmonite to protect parts made with Jesmonite AC100, AC200 and AC300.

Case containing all official pigments Jesmonite in 10 g presentations, for AC100, AC300 and AC84

Includes: 

• 2 x 10 g Black 
• 2 x 10 g White
• 1 x 10 g Bright Yellow
• 1 x 10 g Rust Yellow
• 1 x 10 g Orange
• 1 x 10 g Terracotta
• 1 x 10 g Coade (brown)
• 1 x 10 g Green
• 1 x 10 g Blue
• 1 x 10 g Lilac
• 1 x 10 g Pink
• 1 x 10 g Bright Red
• 1 x 10 g Rust Red

Mixing blades for acrylic resins, 65 or 35 mm. Thanks to their design, they prevent the formation of bubbles and achieve a homogeneous mixture in a few seconds. They fit any standard drill.

Acrylic sealant with GLOSS finish for Jesmonite to protect parts made with Jesmonite AC100, AC200 and AC300.

Acrylic pigment for Jesmonite resin. Apply a maximum of 2% by weight. AC100 resin produces the most vivid colours as it has a higher acrylic resin content.

Pigments are sold by weight and each colour has a different density, so it may appear that some colours are only half full. This is particularly true of white, oxides and terracotta.

Purchase the Jesmonite AC100 resin base separately here, in the format you require, either because you have run out or because you are making a different mixture than the one recommended to achieve different results. Select the size according to your needs.

Pack containing everything you need to start working with JESMONITE AC100:

JESMONITE, 1 silicone mould and pigments. 

Case containing all official pigments Jesmonite in 10 g presentations, for AC100, AC300 and AC84

Includes: 

• 2 x 10 g Black 
• 2 x 10 g White
• 1 x 10 g Bright Yellow
• 1 x 10 g Rust Yellow
• 1 x 10 g Orange
• 1 x 10 g Terracotta
• 1 x 10 g Coade (brown)
• 1 x 10 g Green
• 1 x 10 g Blue
• 1 x 10 g Lilac
• 1 x 10 g Pink
• 1 x 10 g Bright Red
• 1 x 10 g Rust Red

Get more working time with the retarder for resin referencesJesmonite, AC100, AC200, AC300. Recommended mixing ratio of 2 to 8 grams per kilogram of mixture.

60x40cm silicone mat, ideal for working with any resin, easy to clean.