Silver chips for Jesmonite 30g (glitter chips)

Pack containing everything you need to start working with JESMONITE AC100:

JESMONITE, 1 silicone mould and pigments. 

Pack containing everything you need to start working with JESMONITE AC100:

JESMONITE, 1 silicone mould and pigments. 

Powerful and environmentally friendly detergent. Safe for cleaning all types of moulds. Removes JESMONITE residues, pigments, glitter and metallic powders from the mould.

Mixing blade for Jesmonite, compatible with any drill, available in 35 mm and 65 mm. Ensures fast, homogeneous, bubble-free mixing. Made of stainless material, also suitable for epoxy resin.

Case containing all official pigments Jesmonite in 10 g presentations, for AC100, AC300 and AC84

Includes: 

• 2 x 10 g Black 
• 2 x 10 g White
• 1 x 10 g Bright Yellow
• 1 x 10 g Rust Yellow
• 1 x 10 g Orange
• 1 x 10 g Terracotta
• 1 x 10 g Coade (brown)
• 1 x 10 g Green
• 1 x 10 g Blue
• 1 x 10 g Lilac
• 1 x 10 g Pink
• 1 x 10 g Bright Red
• 1 x 10 g Rust Red

155 mm wooden sticks for mixing resins (Jesmonite, epoxy, polyester) and craft materials. Pack of 25 pieces.

Pack containing everything you need to start working with JESMONITE AC100:

JESMONITE, 1 silicone mould and pigments. 

60x40cm silicone mat, ideal for working with any resin, easy to clean.

The vibrating platform is extremely helpful for removing bubbles from moulds, achieving a homogeneous mixture and improving the results of all your pieces with Jesmonite. You can also use it when making silicone moulds to ensure that the silicone reaches even the smallest corners.

Jesmonite spray varnish for parts. Gloss finish. 

Easy to apply. 150 ml format.

Jesmonite AC84 is a two-component water-based acrylic resin, ideal for creating stone-finished pieces from moulds. Its high resistance and detail fidelity allow for durable and realistic results, with a texture that simulates natural stone, but without the actual weight. It is easy to use, customisable with pigments and safe as it does not emit toxic vapours. Perfect for sculptors, designers and creators of artistic and decorative pieces.

Case with 10 officialJesmonitepigments in 50g packs, for AC100, AC300 and AC84

Includes: 

1 x 50 g Black 

1 x 50 g White

1 x 50 g Bright Yellow

1 x 50 g Rust Yellow

1 x 50 g Terracotta

1 x 50 g Coade (coffee)

1 x 50 g Green

1 x 50 g Blue

1 x 50 g Bright Red

1 x 50 g Rust Red

Jesmonite spray varnish for parts. Matt finish

Easy to apply. 150 ml format

The Jesmonite Sealer – Acrylic SEALER with satin finish is a water-based acrylic protective coating specially formulated for Jesmonite surfaces. It provides water resistance, stain protection, and an elegant satin finish that enhances the natural color of your pieces. Ideal for decorative objects, trays, pots, and handcrafted creations.

Silicone stick for mixing all types of resins. Very easy to clean and reuse to avoid waste.

The silver flakes are so fine and soft and can be mixed excellently with Jesmonite or other resins. Achieve an elegant and striking end result!

Perfect for use with JESMONITE AC100

5g format

Acrylic pigment for Jesmonite resin. Apply a maximum of 2% by weight. AC100 resin produces the most vivid colours as it has a higher acrylic resin content.

Pigments are sold by weight and each colour has a different density, so it may appear that some colours are only half full. This is particularly true of white, oxides and terracotta.

Neon-based mineral pigments. Perfect for use with Jesmonite AC100/AC200/AC300. You can unleash your creativity with truly striking colours (neon effect).

Please note: does not glow in the dark! No fluorescent pigments.

32 mm diameter fibreglass braid, 300tex thread, 68 g/metre. (tubular)

The silver flakes are so fine and soft and can be mixed excellently with Jesmonite or other resins. Achieve an elegant and striking end result!

Perfect for use with JESMONITE AC100

5g format

Paraffined styrene with 5% paraffin content, ideal as an additive for unsaturated polyester resins. This product eliminates surface tackiness after curing, making sanding and finishing fiberglass parts easier.

It allows converting Gel-Coat into Top-Coat and is especially useful for lamination, repair and surfboard glassing. Recommended dosage is approximately 3% by weight of the resin before adding the catalyst.

155 mm wooden sticks for mixing resins (Jesmonite, epoxy, polyester) and craft materials. Pack of 25 pieces.