Jesmonite, 5 g (metal flakes silver)

155 mm long wooden sticks for mixing all types of resins. Pack of 25 units.

Pack containing everything you need to start working with JESMONITE AC100:

JESMONITE, 1 silicone mould and pigments. 

Glitter chips are as fine as sand, but also slightly thicker, up to about 3 mm, and can be mixed excellently with Jesmonite or other resins. Glitter chips give your creation an elegant and eye-catching finish!

Perfect for use with JESMONITE AC100

Format 30g

Acrylic sealant with GLOSS finish for Jesmonite to protect parts made with Jesmonite AC100, AC200 and AC300.

Silicone stick for mixing all types of resins. Very easy to clean and reuse to avoid waste.

Pack containing everything you need to start working with JESMONITE AC100:

JESMONITE, 1 silicone mould and pigments. 

Jesmonite AC84 is a two-component water-based acrylic resin, ideal for creating stone-finished pieces from moulds. Its high resistance and detail fidelity allow for durable and realistic results, with a texture that simulates natural stone, but without the actual weight. It is easy to use, customisable with pigments and safe as it does not emit toxic vapours. Perfect for sculptors, designers and creators of artistic and decorative pieces.

Pack containing everything you need to start working with JESMONITE AC100:

JESMONITE, 1 silicone mould and pigments. 

Jesmonitee acrylic sealant to protect parts made with Jesmonite AC100, AC200 and AC300.

Mixing blades for acrylic resins, 65 or 35 mm. Thanks to their design, they prevent the formation of bubbles and achieve a homogeneous mixture in a few seconds. They fit any standard drill.

Case containing all official pigments Jesmonite in 10 g presentations, for AC100, AC300 and AC84

Includes: 

• 2 x 10 g Black 
• 2 x 10 g White
• 1 x 10 g Bright Yellow
• 1 x 10 g Rust Yellow
• 1 x 10 g Orange
• 1 x 10 g Terracotta
• 1 x 10 g Coade (brown)
• 1 x 10 g Green
• 1 x 10 g Blue
• 1 x 10 g Lilac
• 1 x 10 g Pink
• 1 x 10 g Bright Red
• 1 x 10 g Rust Red

Pack containing everything you need to start working with JESMONITE AC100:

JESMONITE, 1 silicone mould and pigments. 

Powerful and environmentally friendly detergent. Safe for cleaning all types of moulds. Removes JESMONITE residues, pigments, glitter and metallic powders from the mould.

Neon-based mineral pigments. Perfect for use with Jesmonite AC100/AC200/AC300. You can unleash your creativity with truly striking colours (neon effect).

Please note: does not glow in the dark! No fluorescent pigments.

The vibrating platform is extremely helpful for removing bubbles from moulds, achieving a homogeneous mixture and improving the results of all your pieces with Jesmonite. You can also use it when making silicone moulds to ensure that the silicone reaches even the smallest corners.

60x40cm silicone mat, ideal for working with any resin, easy to clean.

Styrene monomer with 5% paraffin added. For removing the bite from polyester resins. Converts a gel coat into a top coat or for glazing surfboards.

Acrylic pigment for Jesmonite resin. Apply a maximum of 2% by weight. AC100 resin produces the most vivid colours as it has a higher acrylic resin content.

Pigments are sold by weight and each colour has a different density, so it may appear that some colours are only half full. This is particularly true of white, oxides and terracotta.

Jesmonitee acrylic sealant to protect parts made with Jesmonite AC100, AC200 and AC300.

Polyester resin for castings of any size, without pre-acceleration. Cobalt octoate and MEK must be added depending on the size of the casting.

Jesmonite AC100 is the ideal resin to bring your creativity to life. It is an alternative to polyester or polyurethane for all types of decorative pieces. Ideal for use with silicone moulds.

Take advantage of February's special price on 1.75 kg kits with a 20% discount.

Glitter chips are as fine as sand, but also slightly thicker, up to about 3 mm, and can be mixed excellently with Jesmonite or other resins. Glitter chips give your creation an elegant and eye-catching finish!

Perfect for use with JESMONITE AC100

Format 30g

Case containing all official pigments Jesmonite in 10 g presentations, for AC100, AC300 and AC84

Includes: 

• 2 x 10 g Black 
• 2 x 10 g White
• 1 x 10 g Bright Yellow
• 1 x 10 g Rust Yellow
• 1 x 10 g Orange
• 1 x 10 g Terracotta
• 1 x 10 g Coade (brown)
• 1 x 10 g Green
• 1 x 10 g Blue
• 1 x 10 g Lilac
• 1 x 10 g Pink
• 1 x 10 g Bright Red
• 1 x 10 g Rust Red

Structural load of chopped fibreglass strands. For reinforcing polyester, epoxy and acrylic resins Jesmonite.