English GB
Jesmonite AC100 is the ideal resin to bring your creativity to life. It is an alternative to polyester or polyurethane for all types of decorative pieces. Ideal for use with silicone moulds.
Take advantage of February's special price on 1.75 kg kits with a 20% discount.
Acrylic pigment for Jesmonite resin. Apply a maximum of 2% by weight. AC100 resin produces the most vivid colours as it has a higher acrylic resin content.
Pigments are sold by weight and each colour has a different density, so it may appear that some colours are only half full. This is particularly true of white, oxides and terracotta.
Jesmonite AC84 is a two-component water-based acrylic resin, ideal for creating stone-finished pieces from moulds. Its high resistance and detail fidelity allow for durable and realistic results, with a texture that simulates natural stone, but without the actual weight. It is easy to use, customisable with pigments and safe as it does not emit toxic vapours. Perfect for sculptors, designers and creators of artistic and decorative pieces.
Case containing all official pigments Jesmonite in 10 g presentations, for AC100, AC300 and AC84
Includes:
The first 100% biodegradable resin of plant origin! Resin based on linseed oil and a natural activator based on sugar beet molasses: an innovative, safe and sustainable way to create your own decorative, utilitarian and artistic objects. Reslin® is easy and creative to use, with no harmful substances! Your pieces will be ready in 60 minutes at a low temperature in a convection oven. These Reslin® sets contain enough material to create multiple Reslin® objects. They are ideal for both small and large projects. Create endless possibilities with Reslin®!
Neon-based mineral pigments. Perfect for use with Jesmonite AC100/AC200/AC300. You can unleash your creativity with truly striking colours (neon effect).
Please note: does not glow in the dark! No fluorescent pigments.
Very fine mineral powder in beautiful, bright pearlescent colours. Mix the mica powder with Reslin® to give your objects a shiny pearlescent effect.
Format: 9 g
Mix this glow-in-the-dark pigment with Reslin® and create your own glow-in-the-dark artwork. It provides a glow-in-the-dark effect when properly charged and used in a dark room.
Format: 10 g
Natural glitter made from mica slate grain, which does not contain plastic. You can sprinkle it into your mould or mix it with your Reslin® to add a beautiful shine to your creation.
15 g format
Reslin® Tint, highly pigmented, solvent-based and with excellent coverage. Add a few drops of Reslin® Ink to the Reslin® mixture to colour it. You will obtain very vivid colours with excellent coverage. Size: 20 ml.
Whatsapp
English GB
Mixing blades for acrylic resins, 65 or 35 mm. Thanks to their design, they prevent the formation of bubbles and achieve a homogeneous mixture in a few seconds. They fit any standard drill.
Shipping 24/48 h
Secure payment
Easy returns
Mixing blades for acrylic resins, 65 or 35 mm. Thanks to their design, they prevent the formation of bubbles and achieve a homogeneous mixture in a few seconds. They fit any standard drill.
AC730 Flex Metal is the best solution for achieving a metallic effect on parts made from silicone moulds with Jesmonite resin. Achieve the look and feel of metal. An alternative to copper, bronze, silver or brass casting. Select the finish and format you need.
Acrylic pigment for Jesmonite resin. Apply a maximum of 2% by weight. AC100 resin produces the most vivid colours as it has a higher acrylic resin content.
Pigments are sold by weight and each colour has a different density, so it may appear that some colours are only half full. This is particularly true of white, oxides and terracotta.
Jesmonite AC100 is the ideal resin to bring your creativity to life. It is an alternative to polyester or polyurethane for all types of decorative pieces. Ideal for use with silicone moulds.
Take advantage of February's special price on 1.75 kg kits with a 20% discount.
AC300 is the solution for casting and moulding acrylic resin in moulds to obtain solid pieces at a lower cost than AC100. You can cast pieces of any size.
AC730 is the ideal resin for fibreglass-reinforced decorative mouldings, ornaments and all types of sculptures. It is suitable for outdoor use and available in a wide range of stone finishes. It can be used for small castings, although it performs best in fibreglass laminates.
Glitter chips are as fine as sand, but also slightly thicker, up to about 3 mm, and can be mixed excellently with Jesmonite or other resins. Glitter chips give your creation an elegant and eye-catching finish!
Perfect for use with JESMONITE AC100
Format 30g
Case containing all official pigments Jesmonite in 10 g presentations, for AC100, AC300 and AC84
Includes:
Pack containing everything you need to start working with JESMONITE AC100:
JESMONITE, 1 silicone mould and pigments.
Powerful and environmentally friendly detergent. Safe for cleaning all types of moulds. Removes JESMONITE residues, pigments, glitter and metallic powders from the mould.
The silver flakes are so fine and soft and can be mixed excellently with Jesmonite or other resins. Achieve an elegant and striking end result!
Perfect for use with JESMONITE AC100
5g format
Acrylic sealant with GLOSS finish for Jesmonite to protect parts made with Jesmonite AC100, AC200 and AC300.
60x40cm silicone mat, ideal for working with any resin, easy to clean.
Jesmonite spray varnish for parts. Matt finish
Easy to apply. 150 ml format
Pack containing everything you need to start working with JESMONITE AC100:
JESMONITE, 1 silicone mould and pigments.
Case with 10 officialJesmonitepigments in 50g packs, for AC100, AC300 and AC84
Includes:
1 x 50 g Black
1 x 50 g White
1 x 50 g Bright Yellow
1 x 50 g Rust Yellow
1 x 50 g Terracotta
1 x 50 g Coade (coffee)
1 x 50 g Green
1 x 50 g Blue
1 x 50 g Bright Red
1 x 50 g Rust Red
Pack containing everything you need to start working with JESMONITE AC100:
JESMONITE, 1 silicone mould and pigments.
Jesmonitee acrylic sealant to protect parts made with Jesmonite AC100, AC200 and AC300.
Neon-based mineral pigments. Perfect for use with Jesmonite AC100/AC200/AC300. You can unleash your creativity with truly striking colours (neon effect).
Please note: does not glow in the dark! No fluorescent pigments.
Pack containing everything you need to start working with JESMONITE AC100:
JESMONITE, 1 silicone mould and pigments.
The vibrating platform is extremely helpful for removing bubbles from moulds, achieving a homogeneous mixture and improving the results of all your pieces with Jesmonite. You can also use it when making silicone moulds to ensure that the silicone reaches even the smallest corners.
Silicone stick for mixing all types of resins. Very easy to clean and reuse to avoid waste.
Silicone stick for mixing all types of resins. Very easy to clean and reuse to avoid waste.
Metal filler for Jesmonite resins. Available in copper, bronze and brass. 99.9% purity for a spectacular finish.
5 kg tabletop scale, 1 gram precision. Ideal for accurately weighing and measuring all resins.
Extends working time with the retarder for resin referencesJesmonite, AC730, and AC730 FLEX. Recommended mixing ratio of 2 to 8 grams per kilogram of mixture.
Structural load of chopped fibreglass strands. For reinforcing polyester, epoxy and acrylic resins Jesmonite.
AC730 is the ideal resin for fibreglass-reinforced decorative mouldings, ornaments and all types of sculptures. It is suitable for outdoor use and available in a wide range of stone finishes. It can be used for small castings, although it performs best in fibreglass laminates.
RTV (Room Temperature Vulcanisation) silicone Standard for all types of quick, flexible and non-stick moulds.
NEW FORMULA, GREATER TEAR RESISTANCE, FOR MAKING MORE COPIES FROM A MOLD.
Purchase the Jesmonite AC300 resin liquid separately, in the format you require, either because you have run out or because you are making a different mixture than the one recommended to achieve different results.
Mixing blades for acrylic resins, 65 or 35 mm. Thanks to their design, they prevent the formation of bubbles and achieve a homogeneous mixture in a few seconds. They fit any standard drill.
Català
Español
Português PT
