English GB
Jesmonite AC100 is the ideal resin to bring your creativity to life. It is an alternative to polyester or polyurethane for all types of decorative pieces. Ideal for use with silicone moulds.
Acrylic pigment for Jesmonite resin. Apply a maximum of 2% by weight. AC100 resin produces the most vivid colours as it has a higher acrylic resin content.
Pigments are sold by weight and each colour has a different density, so it may appear that some colours are only half full. This is particularly true of white, oxides and terracotta.
Jesmonite AC84 is a two-component water-based acrylic resin, ideal for creating stone-finished pieces from moulds. Its high resistance and detail fidelity allow for durable and realistic results, with a texture that simulates natural stone, but without the actual weight. It is easy to use, customisable with pigments and safe as it does not emit toxic vapours. Perfect for sculptors, designers and creators of artistic and decorative pieces.
Case containing all official pigments Jesmonite in 10 g presentations, for AC100, AC300 and AC84
Includes:
The first 100% biodegradable resin of plant origin! Resin based on linseed oil and a natural activator based on sugar beet molasses: an innovative, safe and sustainable way to create your own decorative, utilitarian and artistic objects. Reslin® is easy and creative to use, with no harmful substances! Your pieces will be ready in 60 minutes at a low temperature in a convection oven. These Reslin® sets contain enough material to create multiple Reslin® objects. They are ideal for both small and large projects. Create endless possibilities with Reslin®!
Neon-based mineral pigments. Perfect for use with Jesmonite AC100/AC200/AC300. You can unleash your creativity with truly striking colours (neon effect).
Please note: does not glow in the dark! No fluorescent pigments.
Very fine mineral powder in beautiful, bright pearlescent colours. Mix the mica powder with Reslin® to give your objects a shiny pearlescent effect.
Format: 9 g
Mix this glow-in-the-dark pigment with Reslin® and create your own glow-in-the-dark artwork. It provides a glow-in-the-dark effect when properly charged and used in a dark room.
Format: 10 g
Natural glitter made from mica slate grain, which does not contain plastic. You can sprinkle it into your mould or mix it with your Reslin® to add a beautiful shine to your creation.
15 g format
Reslin® Tint, highly pigmented, solvent-based and with excellent coverage. Add a few drops of Reslin® Ink to the Reslin® mixture to colour it. You will obtain very vivid colours with excellent coverage. Size: 20 ml.
Whatsapp
English GB
AC300 is the solution for casting and moulding acrylic resin in moulds to obtain solid pieces at a lower cost than AC100. You can cast pieces of any size.
Shipping 24/48 h
Secure payment
Easy returns
Jesmonite AC300 is a water-based acrylic resin ideal for artists, designers and creators looking for a versatile, safe and high-quality material. One of its main advantages is its low viscosity, which allows for a much smoother mixture, easier pouring and a final finish with a higher level of detail. This makes it an excellent choice for working with complex moulds or delicate pieces, as it adapts better to intricate shapes without generating as many air bubbles.
Another great advantage of AC300 is its more competitive price compared to other Jesmonite compounds and similar materials. It offers excellent performance without compromising quality, making it ideal for both personal projects and larger-scale productions.
Furthermore, as it is a solvent-free product with low environmental impact, it is a more sustainable alternative for those who care about the environment. Compatible with pigments, fillers and other additives, it allows for great creative freedom.
If you are looking for a more fluid, economical and versatile material, Jesmonite AC300 is your best ally. Discover why so many professionals have already incorporated it into their creative processes.
Mixing blade for Jesmonite, compatible with any drill, available in 35 mm and 65 mm. Ensures fast, homogeneous, bubble-free mixing. Made of stainless material, also suitable for epoxy resin.
Acrylic pigment for Jesmonite resin. Apply a maximum of 2% by weight. AC100 resin produces the most vivid colours as it has a higher acrylic resin content.
Pigments are sold by weight and each colour has a different density, so it may appear that some colours are only half full. This is particularly true of white, oxides and terracotta.
Jesmonite AC100 is the ideal resin to bring your creativity to life. It is an alternative to polyester or polyurethane for all types of decorative pieces. Ideal for use with silicone moulds.
Silgrey (Standard) is a flexible, non-stick and highly accurate RTV silicone for mould making. Ideal for creating silicone moulds and reproducing detailed pieces for projects using epoxy resin, polyester resin and Jesmonite. Catalyst included.
10 cm square coaster-shaped silicone mould
Ideal for resin reproductions of all kinds, especially epoxy and Jesmonite.
155 mm wooden sticks for mixing resins (Jesmonite, epoxy, polyester) and craft materials. Pack of 25 pieces.
Get more working time with the retarder for resin referencesJesmonite, AC100, AC200, AC300. Recommended mixing ratio of 2 to 8 grams per kilogram of mixture.
60x40cm silicone mat, ideal for working with any resin, easy to clean.
The vibrating platform is extremely helpful for removing bubbles from moulds, achieving a homogeneous mixture and improving the results of all your pieces with Jesmonite. You can also use it when making silicone moulds to ensure that the silicone reaches even the smallest corners.
Liquid component for the Jesmonite AC300 system, supplied without the powder base. Ideal for refills or mix adjustments.
155 mm wooden sticks for mixing resins (Jesmonite, epoxy, polyester) and craft materials. Pack of 25 pieces.
The silver flakes are so fine and soft and can be mixed excellently with Jesmonite or other resins. Achieve an elegant and striking end result!
Perfect for use with JESMONITE AC100
5g format
Powerful and environmentally friendly detergent. Safe for cleaning all types of moulds. Removes JESMONITE residues, pigments, glitter and metallic powders from the mould.
Jesmonite spray varnish for parts. Matt finish
Easy to apply. 150 ml format
Jesmonite spray varnish for parts. Gloss finish.
Easy to apply. 150 ml format.
Glitter chips are as fine as sand, but also slightly thicker, up to about 3 mm, and can be mixed excellently with Jesmonite or other resins. Glitter chips give your creation an elegant and eye-catching finish!
Perfect for use with JESMONITE AC100
Format 30g
The Jesmonite Sealer – Acrylic SEALER with satin finish is a water-based acrylic protective coating specially formulated for Jesmonite surfaces. It provides water resistance, stain protection, and an elegant satin finish that enhances the natural color of your pieces. Ideal for decorative objects, trays, pots, and handcrafted creations.
Mixing blade for Jesmonite, compatible with any drill, available in 35 mm and 65 mm. Ensures fast, homogeneous, bubble-free mixing. Made of stainless material, also suitable for epoxy resin.
Acrylic sealant with GLOSS finish for Jesmonite to protect parts made with JesThe Jesmonite Sealer – Acrylic GLOSS SEALER with glossy finish is a water-based acrylic sealer designed to protect and enhance Jesmonite surfaces. Provides water and stain resistance with an intense glossy finish that highlights colors and details. Ideal for trays, pots, decorative objects, and artistic creations.monite AC100, AC200 and AC300.
Case with 10 officialJesmonitepigments in 50g packs, for AC100, AC300 and AC84
Includes:
1 x 50 g Black
1 x 50 g White
1 x 50 g Bright Yellow
1 x 50 g Rust Yellow
1 x 50 g Terracotta
1 x 50 g Coade (coffee)
1 x 50 g Green
1 x 50 g Blue
1 x 50 g Bright Red
1 x 50 g Rust Red
Case containing all official pigments Jesmonite in 10 g presentations, for AC100, AC300 and AC84
Includes:
Solution for modifying the viscosity of RTV silicones. Especially recommended for SILTHIXO silicone. Saves time and silicone.
Rhodiasolv RPDE solvent is a resin cleaning agent that can replace acetone and other irritating chemicals. It is not suitable for diluting, only for cleaning. It is very efficient as it does not evaporate.
Flat fiberglass fabric 130 g/m², 100 cm wide, ideal for laminates with polyester or epoxy resin. Sold per linear meter.
Silspray 400 ml silicone oil release spray, ideal for easy demolding and extending the life of silicone molds.
The Jesmonite Sealer – Acrylic SEALER with satin finish is a water-based acrylic protective coating specially formulated for Jesmonite surfaces. It provides water resistance, stain protection, and an elegant satin finish that enhances the natural color of your pieces. Ideal for decorative objects, trays, pots, and handcrafted creations.
Alginate is a material for quick moulds, using water, and suitable for reproducing body parts as it is non-toxic and can come into contact with the skin.
AC300 is the solution for casting and moulding acrylic resin in moulds to obtain solid pieces at a lower cost than AC100. You can cast pieces of any size.
Català
Español
Français
Português PT
