RETARDER

Acrylic sealant with GLOSS finish for Jesmonite to protect parts made with Jesmonite AC100, AC200 and AC300.

Acid for removing the surface layer of acrylic resin in applications with stone fillers. This achieves a finish with more filler particles visible.

Jesmonite spray varnish for parts. Matt finish

Easy to apply. 150 ml format

Thickening additive "Thixotropic" for resin referencesJesmonite, AC100, AC200, AC300. Prevents sagging. Saves time and material. Recommended mixing ratio of 2 to 6 grams per kilogram of mixture.

Jesmonite spray varnish for parts. Gloss finish. 

Easy to apply. 150 ml format.

The vibrating platform is extremely helpful for removing bubbles from moulds, achieving a homogeneous mixture and improving the results of all your pieces with Jesmonite. You can also use it when making silicone moulds to ensure that the silicone reaches even the smallest corners.

155 mm long wooden sticks for mixing all types of resins. Pack of 25 units.

Powerful and environmentally friendly detergent. Safe for cleaning all types of moulds. Removes JESMONITE residues, pigments, glitter and metallic powders from the mould.

Extends working time with the retarder for resin referencesJesmonite, AC730, and AC730 FLEX. Recommended mixing ratio of 2 to 8 grams per kilogram of mixture.

60x40cm silicone mat, ideal for working with any resin, easy to clean.

Jesmonitee acrylic sealant to protect parts made with Jesmonite AC100, AC200 and AC300.

Case containing all official pigments Jesmonite in 10 g presentations, for AC100, AC300 and AC84

Includes: 

• 2 x 10 g Black 
• 2 x 10 g White
• 1 x 10 g Bright Yellow
• 1 x 10 g Rust Yellow
• 1 x 10 g Orange
• 1 x 10 g Terracotta
• 1 x 10 g Coade (brown)
• 1 x 10 g Green
• 1 x 10 g Blue
• 1 x 10 g Lilac
• 1 x 10 g Pink
• 1 x 10 g Bright Red
• 1 x 10 g Rust Red

Addition silicone (platinum), greater durability over time and higher tear resistance. Recommended for multiple copies or prototyping. The best silicone from Resineco

High viscosity (thixotropic) RTV (Room Temperature Vulcanisation) silicone specially designed for large moulds applied in layers. Requires the THIX additive to control viscosity.

AC730 is the ideal resin for fibreglass-reinforced decorative mouldings, ornaments and all types of sculptures. It is suitable for outdoor use and available in a wide range of stone finishes. It can be used for small castings, although it performs best in fibreglass laminates.

Nylon fibre abrasive wheel for sanding Jesmonite Metal surfaces. Can be used on flat and uneven interior surfaces. 6 mm shank. Compatible with most electric drills.

RTV (Room Temperature Vulcanisation) silicone Standard for all types of quick, flexible and non-stick moulds.

NEW FORMULA, GREATER TEAR RESISTANCE, FOR MAKING MORE COPIES FROM A MOLD.

Acrylic pigment for Jesmonite resin. Apply a maximum of 2% by weight. AC100 resin produces the most vivid colours as it has a higher acrylic resin content.

Pigments are sold by weight and each colour has a different density, so it may appear that some colours are only half full. This is particularly true of white, oxides and terracotta.

Silicone oil release agent, highly recommended for facilitating successive reproductions in silicone moulds, extending the life of the mould and making it easier to clean.