English GB
Jesmonite AC100 is the ideal resin to give life to your creativity. It is an alternative to polyester or polyurethane for all kinds of decorative pieces. Ideal with silicone molds.
Take advantage of the special February price on 1.75 kg kits with a 20% discount
Acrylic pigment for Jesmonite resin. It is applied to a maximum of 2% by weight. With the AC100 resin the most vivid colors are obtained by having a higher acrylic resin content.
Pigments are sold by weight and each color has a different density, so for some colors it may appear that the bottle is only half full. Especially white, oxides and terracotta.
Jesmonite AC84 is a two-component, water-based acrylic resin, perfect for creating stone-like pieces from molds. Known for its high durability and precise detail reproduction, it offers a realistic stone finish without the heavy weight. Easy to use, customizable with pigments, and safe, as it emits no toxic fumes. Ideal for sculptors, designers, and creators of artistic and decorative pieces.
Case with all the official Jesmonite pigments in 10gr presentation, for AC100, AC300 and AC84
includes:
The first 100% biodegradable plant-based resin! Linseed oil-based resin and a natural activator based on sugar beet molasses: an innovative, safe, and sustainable way to create your own decorative, utilitarian, and artistic objects. Using Reslin® is simple and creative, without harmful substances! Your pieces will be ready in 60 minutes at a low temperature in the convection oven. These Reslin® sets contain enough material to create multiple Reslin® objects. They are ideal for both small and big projects. Create endless possibilities with Reslin®!
Mineral pigments with neon-colored base. Perfect for use with Jesmonite AC100/AC200/AC300. You can give free rein to your creativity with really bright colors (neon effect).
Please note: does not light up in the dark! No fluorescent pigments.
Mix this glow in the dark pigment with Reslin® and create your own glow in the dark artwork. Gives a glow in the dark effect when properly charged and used in a very dark room.
Natural glitter made from mica slate grit, which contains no plastic. You can sprinkle it into your mold or mix it through your Reslin® to add a beautiful shine to your creation.
Size 15 GR
Reslin® Tint is a highly pigmented, solvent-based, high-coverage ink. Add a few drops of Reslin® Tint to the Reslin® mixture to color it. You'll get vibrant, high-coverage colors. vol 20ml
Whatsapp
English GB
Extends working time with the retarder for resin referencesJesmonite, AC730, and AC730 FLEX. Recommended mixing ratio of 2 to 8 grams per kilogram of mixture.
Shipping 24/48 h
Secure payment
Easy returns
Retardant for resin referencesJesmonite, AC730 and AC730 FLEX. Recommended mixing ratio of 2 to 8 grams per kilogram of mixture. It is advisable to carry out verification tests to adjust the setting times to each requirement.
Mixing blades for acrylic resins, 65 or 35 mm. Thanks to their design, they prevent the formation of bubbles and achieve a homogeneous mixture in a few seconds. They fit any standard drill.
AC730 Flex Metal is the best solution for achieving a metallic effect on parts made from silicone moulds with Jesmonite resin. Achieve the look and feel of metal. An alternative to copper, bronze, silver or brass casting. Select the finish and format you need.
Elasticity and feel. Format: Box of 100 units. Natural colour.
AC730 is the ideal resin for fibreglass-reinforced decorative mouldings, ornaments and all types of sculptures. It is suitable for outdoor use and available in a wide range of stone finishes. It can be used for small castings, although it performs best in fibreglass laminates.
Jesmonite AC84 is a two-component water-based acrylic resin, ideal for creating stone-finished pieces from moulds. Its high resistance and detail fidelity allow for durable and realistic results, with a texture that simulates natural stone, but without the actual weight. It is easy to use, customisable with pigments and safe as it does not emit toxic vapours. Perfect for sculptors, designers and creators of artistic and decorative pieces.
AC730 is the ideal resin for fibreglass-reinforced decorative mouldings, ornaments and all types of sculptures. It is suitable for outdoor use and available in a wide range of stone finishes. It can be used for small castings, although it performs best in fibreglass laminates.
60x40cm silicone mat, ideal for working with any resin, easy to clean.
Purchase the Jesmonite AC730 resin liquid separately, in the format you need, either because you have run out or because you are making a different mixture than the one recommended to achieve different results.
Case with 10 officialJesmonitepigments in 50g packs, for AC100, AC300 and AC84
Includes:
1 x 50 g Black
1 x 50 g White
1 x 50 g Bright Yellow
1 x 50 g Rust Yellow
1 x 50 g Terracotta
1 x 50 g Coade (coffee)
1 x 50 g Green
1 x 50 g Blue
1 x 50 g Bright Red
1 x 50 g Rust Red
155 mm long wooden sticks for mixing all types of resins. Pack of 25 units.
Case containing all official pigments Jesmonite in 10 g presentations, for AC100, AC300 and AC84
Includes:
Mixing blades for acrylic resins, 65 or 35 mm. Thanks to their design, they prevent the formation of bubbles and achieve a homogeneous mixture in a few seconds. They fit any standard drill.
Acid for removing the surface layer of acrylic resin in applications with stone fillers. This achieves a finish with more filler particles visible.
Powerful and environmentally friendly detergent. Safe for cleaning all types of moulds. Removes JESMONITE residues, pigments, glitter and metallic powders from the mould.
Kit for applying resins, whether polyester, epoxy or Jesmonite
2 resin-resistant polypropylene (PP) cups
1 pair of size L latex gloves
1 double brush, size 15
2 wooden mixing sticks
Purchase the Jesmonite AC730 resin base separately, in the format you need, either because you have run out or because you are making a different mixture than the one recommended to achieve different results.
The vibrating platform is extremely helpful for removing bubbles from moulds, achieving a homogeneous mixture and improving the results of all your pieces with Jesmonite. You can also use it when making silicone moulds to ensure that the silicone reaches even the smallest corners.
Mixing blades for acrylic resins, 65 or 35 mm. Thanks to their design, they prevent the formation of bubbles and achieve a homogeneous mixture in a few seconds. They fit any standard drill.
Purchase the Jesmonite AC730 resin liquid separately, in the format you need, either because you have run out or because you are making a different mixture than the one recommended to achieve different results.
Jesmonitee acrylic sealant to protect parts made with Jesmonite AC100, AC200 and AC300.
AC730 is the ideal resin for fibreglass-reinforced decorative mouldings, ornaments and all types of sculptures. It is suitable for outdoor use and available in a wide range of stone finishes. It can be used for small castings, although it performs best in fibreglass laminates.
Jesmonite AC84 is a two-component water-based acrylic resin, ideal for creating stone-finished pieces from moulds. Its high resistance and detail fidelity allow for durable and realistic results, with a texture that simulates natural stone, but without the actual weight. It is easy to use, customisable with pigments and safe as it does not emit toxic vapours. Perfect for sculptors, designers and creators of artistic and decorative pieces.
Fibreglass specifically designed for Jesmonite AC100 and AC730 resins. This type of glass reinforcement has been custom-designed for use with Jesmonite. Very easy to adapt and work with. Fireproof.
Jesmonite spray varnish for parts. Gloss finish.
Easy to apply. 150 ml format.
Jesmonite spray varnish for parts. Matt finish
Easy to apply. 150 ml format
Extends working time with the retarder for resin referencesJesmonite, AC730, and AC730 FLEX. Recommended mixing ratio of 2 to 8 grams per kilogram of mixture.
Català
Español
