AC730 STONE POWDERS

Case with 10 officialJesmonitepigments in 50g packs, for AC100, AC300 and AC84

Includes: 

1 x 50 g Black 

1 x 50 g White

1 x 50 g Bright Yellow

1 x 50 g Rust Yellow

1 x 50 g Terracotta

1 x 50 g Coade (coffee)

1 x 50 g Green

1 x 50 g Blue

1 x 50 g Bright Red

1 x 50 g Rust Red

Mixing blades for acrylic resins, 65 or 35 mm. Thanks to their design, they prevent the formation of bubbles and achieve a homogeneous mixture in a few seconds. They fit any standard drill.

Purchase the Jesmonite AC730 resin liquid separately, in the format you need, either because you have run out or because you are making a different mixture than the one recommended to achieve different results.

Extends working time with the retarder for resin referencesJesmonite, AC730, and AC730 FLEX. Recommended mixing ratio of 2 to 8 grams per kilogram of mixture.

The vibrating platform is extremely helpful for removing bubbles from moulds, achieving a homogeneous mixture and improving the results of all your pieces with Jesmonite. You can also use it when making silicone moulds to ensure that the silicone reaches even the smallest corners.

155 mm long wooden sticks for mixing all types of resins. Pack of 25 units.

Powerful and environmentally friendly detergent. Safe for cleaning all types of moulds. Removes JESMONITE residues, pigments, glitter and metallic powders from the mould.

Acid for removing the surface layer of acrylic resin in applications with stone fillers. This achieves a finish with more filler particles visible.

AC730 is the ideal resin for fibreglass-reinforced decorative mouldings, ornaments and all types of sculptures. It is suitable for outdoor use and available in a wide range of stone finishes. It can be used for small castings, although it performs best in fibreglass laminates.

Case containing all official pigments Jesmonite in 10 g presentations, for AC100, AC300 and AC84

Includes: 

• 2 x 10 g Black 
• 2 x 10 g White
• 1 x 10 g Bright Yellow
• 1 x 10 g Rust Yellow
• 1 x 10 g Orange
• 1 x 10 g Terracotta
• 1 x 10 g Coade (brown)
• 1 x 10 g Green
• 1 x 10 g Blue
• 1 x 10 g Lilac
• 1 x 10 g Pink
• 1 x 10 g Bright Red
• 1 x 10 g Rust Red

60x40cm silicone mat, ideal for working with any resin, easy to clean.

Kit for applying resins, whether polyester, epoxy or Jesmonite

2 resin-resistant polypropylene (PP) cups

1 pair of size L latex gloves

1 double brush, size 15

2 wooden mixing sticks

Jesmonite AC84 is a two-component water-based acrylic resin, ideal for creating stone-finished pieces from moulds. Its high resistance and detail fidelity allow for durable and realistic results, with a texture that simulates natural stone, but without the actual weight. It is easy to use, customisable with pigments and safe as it does not emit toxic vapours. Perfect for sculptors, designers and creators of artistic and decorative pieces.

Purchase the Jesmonite AC100 resin liquid separately here, in the format you require, either because you have run out or because you are making a different mixture than the one recommended to achieve different results.

RTV (Room Temperature Vulcanisation) silicone Standard for all types of quick, flexible and non-stick moulds.

NEW FORMULA, GREATER TEAR RESISTANCE, FOR MAKING MORE COPIES FROM A MOLD.

Extends working time with the retarder for resin referencesJesmonite, AC730, and AC730 FLEX. Recommended mixing ratio of 2 to 8 grams per kilogram of mixture.

Jesmonitee acrylic sealant to protect parts made with Jesmonite AC100, AC200 and AC300.

Get more working time with the retarder for resin referencesJesmonite, AC100, AC200, AC300. Recommended mixing ratio of 2 to 8 grams per kilogram of mixture.

Mould release agent in aerosol can. Suitable for polyester, epoxy resins, PMMA and polyurethanes.

Purchase the Jesmonite AC100 resin base separately here, in the format you require, either because you have run out or because you are making a different mixture than the one recommended to achieve different results. Select the size according to your needs.

Acrylic pigment for Jesmonite resin. Apply a maximum of 2% by weight. AC100 resin produces the most vivid colours as it has a higher acrylic resin content.

Pigments are sold by weight and each colour has a different density, so it may appear that some colours are only half full. This is particularly true of white, oxides and terracotta.