English GB
Jesmonite AC100 is the ideal resin to bring your creativity to life. It is an alternative to polyester or polyurethane for all types of decorative pieces. Ideal for use with silicone moulds.
Take advantage of special price on 1.75 kg kits with a 20% discount.
Acrylic pigment for Jesmonite resin. Apply a maximum of 2% by weight. AC100 resin produces the most vivid colours as it has a higher acrylic resin content.
Pigments are sold by weight and each colour has a different density, so it may appear that some colours are only half full. This is particularly true of white, oxides and terracotta.
Jesmonite AC84 is a two-component water-based acrylic resin, ideal for creating stone-finished pieces from moulds. Its high resistance and detail fidelity allow for durable and realistic results, with a texture that simulates natural stone, but without the actual weight. It is easy to use, customisable with pigments and safe as it does not emit toxic vapours. Perfect for sculptors, designers and creators of artistic and decorative pieces.
Case containing all official pigments Jesmonite in 10 g presentations, for AC100, AC300 and AC84
Includes:
The first 100% biodegradable resin of plant origin! Resin based on linseed oil and a natural activator based on sugar beet molasses: an innovative, safe and sustainable way to create your own decorative, utilitarian and artistic objects. Reslin® is easy and creative to use, with no harmful substances! Your pieces will be ready in 60 minutes at a low temperature in a convection oven. These Reslin® sets contain enough material to create multiple Reslin® objects. They are ideal for both small and large projects. Create endless possibilities with Reslin®!
Neon-based mineral pigments. Perfect for use with Jesmonite AC100/AC200/AC300. You can unleash your creativity with truly striking colours (neon effect).
Please note: does not glow in the dark! No fluorescent pigments.
Very fine mineral powder in beautiful, bright pearlescent colours. Mix the mica powder with Reslin® to give your objects a shiny pearlescent effect.
Format: 9 g
Mix this glow-in-the-dark pigment with Reslin® and create your own glow-in-the-dark artwork. It provides a glow-in-the-dark effect when properly charged and used in a dark room.
Format: 10 g
Natural glitter made from mica slate grain, which does not contain plastic. You can sprinkle it into your mould or mix it with your Reslin® to add a beautiful shine to your creation.
15 g format
Reslin® Tint, highly pigmented, solvent-based and with excellent coverage. Add a few drops of Reslin® Ink to the Reslin® mixture to colour it. You will obtain very vivid colours with excellent coverage. Size: 20 ml.
Whatsapp
English GB
Purchase the Jesmonite AC100 resin liquid separately here, in the format you require, either because you have run out or because you are making a different mixture than the one recommended to achieve different results. Jesmonite AC100 resin liquid for mixing with Jesmonite AC Base, ideal for high-strength applications, fiberglass, and porex coatings.
Shipping 24/48 h
Secure payment
Easy returns
Jesmonite AC100 Liquid is the liquid of Jesmonite AC100 resin, designed to be mixed with Jesmonite AC Base. This formulation provides the highest strength in the Jesmonite range, making it ideal for fiberglass work, porex coatings, and other applications requiring high durability.
This product allows you to purchase only the liquid, whether to complete a mix or to adjust ratios to achieve different results for your project needs.
Specific References
Mixing blade for Jesmonite, compatible with any drill, available in 35 mm and 65 mm. Ensures fast, homogeneous, bubble-free mixing. Made of stainless material, also suitable for epoxy resin.
Jesmonite AC100 / AC300 Base (powder only) to mix with Jesmonite liquid resin. Purchase just the base in the format you need to adjust mixes and results.
Acrylic pigment for Jesmonite resin. Apply a maximum of 2% by weight. AC100 resin produces the most vivid colours as it has a higher acrylic resin content.
Pigments are sold by weight and each colour has a different density, so it may appear that some colours are only half full. This is particularly true of white, oxides and terracotta.
Jesmonite AC100 is the ideal resin to bring your creativity to life. It is an alternative to polyester or polyurethane for all types of decorative pieces. Ideal for use with silicone moulds.
Take advantage of special price on 1.75 kg kits with a 20% discount.
AC300 is the solution for casting and moulding acrylic resin in moulds to obtain solid pieces at a lower cost than AC100. You can cast pieces of any size.
Standard RTV (Room Temperature Vulcanisation) silicone for all types of quick-setting, flexible, non-stick moulds.
Fibreglass specifically designed for Jesmonite AC100 and AC730 resins. This type of glass reinforcement has been custom-designed for use with Jesmonite. Very easy to adapt and work with. Fireproof.
Jesmonite spray varnish for parts. Matt finish
Easy to apply. 150 ml format
Complete resin application kit (polyester, epoxy, Jesmonite) with PP cups, latex gloves, double brush and wooden mixing sticks.
60x40cm silicone mat, ideal for working with any resin, easy to clean.
Jesmonite AC100 is the ideal resin to bring your creativity to life. It is an alternative to polyester or polyurethane for all types of decorative pieces. Ideal for use with silicone moulds.
Take advantage of special price on 1.75 kg kits with a 20% discount.
Jesmonite spray varnish for parts. Gloss finish.
Easy to apply. 150 ml format.
Pack containing everything you need to start working with JESMONITE AC100:
JESMONITE, 2 silicone moulds and YELLOW, RED and BLUE pigments.
155 mm wooden sticks for mixing resins (Jesmonite, epoxy, polyester) and craft materials. Pack of 25 pieces.
Fibreglass specifically designed for Jesmonite AC100 and AC730 resins. This type of glass reinforcement has been custom-designed for use with Jesmonite. Very easy to adapt and work with. Fireproof.
The Jesmonite Sealer – Acrylic SEALER with satin finish is a water-based acrylic protective coating specially formulated for Jesmonite surfaces. It provides water resistance, stain protection, and an elegant satin finish that enhances the natural color of your pieces. Ideal for decorative objects, trays, pots, and handcrafted creations.
Get more working time with the retarder for resin referencesJesmonite, AC100, AC200, AC300. Recommended mixing ratio of 2 to 8 grams per kilogram of mixture.
Mixing blade for Jesmonite, compatible with any drill, available in 35 mm and 65 mm. Ensures fast, homogeneous, bubble-free mixing. Made of stainless material, also suitable for epoxy resin.
Metallic filler for Jesmonite systems and polyester resins. Available in bronze, copper or brass. High-purity metal particles for realistic metallic finishes with authentic metal effect.
Pack containing everything you need to start working with JESMONITE AC100:
JESMONITE, 1 silicone mould and pigments.
Pack containing everything you need to start working with JESMONITE AC100:
JESMONITE, 1 silicone mould and pigments.
Silicone stick for mixing all types of resins. Very easy to clean and reuse to avoid waste.
Case containing all official pigments Jesmonite in 10 g presentations, for AC100, AC300 and AC84
Includes:
Powerful and environmentally friendly detergent. Safe for cleaning all types of moulds. Removes JESMONITE residues, pigments, glitter and metallic powders from the mould.
Jesmonite AC100 is the ideal resin to bring your creativity to life. It is an alternative to polyester or polyurethane for all types of decorative pieces. Ideal for use with silicone moulds.
Take advantage of special price on 1.75 kg kits with a 20% discount.
Mineral powder base for the Jesmonite AC730 system, supplied without the liquid component. Designed for high-resistance stone-effect finishes. Contact us for availability, as it is usually sold as a complete kit.
Thickening additive "Thixotropic" for resin referencesJesmonite, AC100, AC200, AC300. Prevents sagging. Saves time and material. Recommended mixing ratio of 2 to 6 grams per kilogram of mixture.
AC300 is the solution for casting and moulding acrylic resin in moulds to obtain solid pieces at a lower cost than AC100. You can cast pieces of any size.
155 mm wooden sticks for mixing resins (Jesmonite, epoxy, polyester) and craft materials. Pack of 25 pieces.
Purchase the Jesmonite AC100 resin liquid separately here, in the format you require, either because you have run out or because you are making a different mixture than the one recommended to achieve different results. Jesmonite AC100 resin liquid for mixing with Jesmonite AC Base, ideal for high-strength applications, fiberglass, and porex coatings.
Català
Español
Português PT
