English GB
Jesmonite AC100 is the ideal resin to bring your creativity to life. It is an alternative to polyester or polyurethane for all types of decorative pieces. Ideal for use with silicone moulds.
Acrylic pigment for Jesmonite resin. Apply a maximum of 2% by weight. AC100 resin produces the most vivid colours as it has a higher acrylic resin content.
Pigments are sold by weight and each colour has a different density, so it may appear that some colours are only half full. This is particularly true of white, oxides and terracotta.
Jesmonite AC84 is a two-component water-based acrylic resin, ideal for creating stone-finished pieces from moulds. Its high resistance and detail fidelity allow for durable and realistic results, with a texture that simulates natural stone, but without the actual weight. It is easy to use, customisable with pigments and safe as it does not emit toxic vapours. Perfect for sculptors, designers and creators of artistic and decorative pieces.
Case containing all official pigments Jesmonite in 10 g presentations, for AC100, AC300 and AC84
Includes:
The first 100% biodegradable resin of plant origin! Resin based on linseed oil and a natural activator based on sugar beet molasses: an innovative, safe and sustainable way to create your own decorative, utilitarian and artistic objects. Reslin® is easy and creative to use, with no harmful substances! Your pieces will be ready in 60 minutes at a low temperature in a convection oven. These Reslin® sets contain enough material to create multiple Reslin® objects. They are ideal for both small and large projects. Create endless possibilities with Reslin®!
Neon-based mineral pigments. Perfect for use with Jesmonite AC100/AC200/AC300. You can unleash your creativity with truly striking colours (neon effect).
Please note: does not glow in the dark! No fluorescent pigments.
Very fine mineral powder in beautiful, bright pearlescent colours. Mix the mica powder with Reslin® to give your objects a shiny pearlescent effect.
Format: 9 g
Mix this glow-in-the-dark pigment with Reslin® and create your own glow-in-the-dark artwork. It provides a glow-in-the-dark effect when properly charged and used in a dark room.
Format: 10 g
Natural glitter made from mica slate grain, which does not contain plastic. You can sprinkle it into your mould or mix it with your Reslin® to add a beautiful shine to your creation.
15 g format
Reslin® Tint, highly pigmented, solvent-based and with excellent coverage. Add a few drops of Reslin® Ink to the Reslin® mixture to colour it. You will obtain very vivid colours with excellent coverage. Size: 20 ml.
Whatsapp
English GB
Jesmonite AC100 / AC300 Base (powder only) to mix with Jesmonite liquid resin. Purchase just the base in the format you need to adjust mixes and results.
Shipping 24/48 h
Secure payment
Easy returns
The Jesmonite AC100 / AC300 Base is the powder component of Jesmonite resin, designed to be mixed with the corresponding liquid resin (Jesmonite AC100 Liquids). This base powder is available separately so you can purchase exactly what you need, whether to top up a mix that has run out or to adjust ratios to achieve different final properties.
Select the powder base size according to your work and project needs, and mix it with the appropriate liquid to obtain a strong and versatile resin suitable for decoration, reinforcement, or technical applications.
Specific References
Mixing blade for Jesmonite, compatible with any drill, available in 35 mm and 65 mm. Ensures fast, homogeneous, bubble-free mixing. Made of stainless material, also suitable for epoxy resin.
Purchase the Jesmonite AC100 resin liquid separately here, in the format you require, either because you have run out or because you are making a different mixture than the one recommended to achieve different results. Jesmonite AC100 resin liquid for mixing with Jesmonite AC Base, ideal for high-strength applications, fiberglass, and porex coatings.
Liquid component for the Jesmonite AC300 system, supplied without the powder base. Ideal for refills or mix adjustments.
Acrylic pigment for Jesmonite resin. Apply a maximum of 2% by weight. AC100 resin produces the most vivid colours as it has a higher acrylic resin content.
Pigments are sold by weight and each colour has a different density, so it may appear that some colours are only half full. This is particularly true of white, oxides and terracotta.
Jesmonite AC100 is the ideal resin to bring your creativity to life. It is an alternative to polyester or polyurethane for all types of decorative pieces. Ideal for use with silicone moulds.
Silgrey (Standard) is a flexible, non-stick and highly accurate RTV silicone for mould making. Ideal for creating silicone moulds and reproducing detailed pieces for projects using epoxy resin, polyester resin and Jesmonite. Catalyst included.
Pack containing everything you need to start working with JESMONITE AC100:
JESMONITE, 2 silicone moulds and YELLOW, RED and BLUE pigments.
Mixing blade for Jesmonite, compatible with any drill, available in 35 mm and 65 mm. Ensures fast, homogeneous, bubble-free mixing. Made of stainless material, also suitable for epoxy resin.
Case with 10 officialJesmonitepigments in 50g packs, for AC100, AC300 and AC84
Includes:
1 x 50 g Black
1 x 50 g White
1 x 50 g Bright Yellow
1 x 50 g Rust Yellow
1 x 50 g Terracotta
1 x 50 g Coade (coffee)
1 x 50 g Green
1 x 50 g Blue
1 x 50 g Bright Red
1 x 50 g Rust Red
Pack containing everything you need to start working with JESMONITE AC100:
JESMONITE, 1 silicone mould and pigments.
Purchase the Jesmonite AC100 resin liquid separately here, in the format you require, either because you have run out or because you are making a different mixture than the one recommended to achieve different results. Jesmonite AC100 resin liquid for mixing with Jesmonite AC Base, ideal for high-strength applications, fiberglass, and porex coatings.
Pack containing everything you need to start working with JESMONITE AC100:
60x40cm silicone mat, ideal for working with any resin, easy to clean.
Pack containing everything you need to start working with JESMONITE AC100:
JESMONITE, 1 silicone mould and pigments.
Acrylic sealant with GLOSS finish for Jesmonite to protect parts made with JesThe Jesmonite Sealer – Acrylic GLOSS SEALER with glossy finish is a water-based acrylic sealer designed to protect and enhance Jesmonite surfaces. Provides water and stain resistance with an intense glossy finish that highlights colors and details. Ideal for trays, pots, decorative objects, and artistic creations.monite AC100, AC200 and AC300.
Jesmonite AC100 is the ideal resin to bring your creativity to life. It is an alternative to polyester or polyurethane for all types of decorative pieces. Ideal for use with silicone moulds.
The vibrating platform is extremely helpful for removing bubbles from moulds, achieving a homogeneous mixture and improving the results of all your pieces with Jesmonite. You can also use it when making silicone moulds to ensure that the silicone reaches even the smallest corners.
The silver flakes are so fine and soft and can be mixed excellently with Jesmonite or other resins. Achieve an elegant and striking end result!
Perfect for use with JESMONITE AC100
5g format
Pack containing everything you need to start working with JESMONITE AC100:
JESMONITE, 1 silicone mould and pigments.
Thickening additive "Thixotropic" for resin referencesJesmonite, AC100, AC200, AC300. Prevents sagging. Saves time and material. Recommended mixing ratio of 2 to 6 grams per kilogram of mixture.
Jesmonite spray varnish for parts. Gloss finish.
Easy to apply. 150 ml format.
Acrylic pigment for Jesmonite resin. Apply a maximum of 2% by weight. AC100 resin produces the most vivid colours as it has a higher acrylic resin content.
Pigments are sold by weight and each colour has a different density, so it may appear that some colours are only half full. This is particularly true of white, oxides and terracotta.
Fibreglass specifically designed for Jesmonite AC100 and AC730 resins. This type of glass reinforcement has been custom-designed for use with Jesmonite. Very easy to adapt and work with. Fireproof.
Neon-based mineral pigments. Perfect for use with Jesmonite AC100/AC200/AC300. You can unleash your creativity with truly striking colours (neon effect).
Please note: does not glow in the dark! No fluorescent pigments.
6 mm chopped fiberglass strands for reinforcement of resins, fillers, composites and Jesmonite. Improves mechanical strength and durability. Available in 1 kg and 20 kg formats.
AC730 is the ideal resin for fibreglass-reinforced decorative mouldings, ornaments and all types of sculptures. It is suitable for outdoor use and available in a wide range of stone finishes. It can be used for small castings, although it performs best in fibreglass laminates.
Acrylic sealant with GLOSS finish for Jesmonite to protect parts made with JesThe Jesmonite Sealer – Acrylic GLOSS SEALER with glossy finish is a water-based acrylic sealer designed to protect and enhance Jesmonite surfaces. Provides water and stain resistance with an intense glossy finish that highlights colors and details. Ideal for trays, pots, decorative objects, and artistic creations.monite AC100, AC200 and AC300.
Jesmonite spray varnish for parts. Matt finish
Easy to apply. 150 ml format
Jesmonite spray varnish for parts. Gloss finish.
Easy to apply. 150 ml format.
Jesmonite AC100 / AC300 Base (powder only) to mix with Jesmonite liquid resin. Purchase just the base in the format you need to adjust mixes and results.
Català
Español
Français
Português PT
