English GB
Jesmonite AC100 is the ideal resin to bring your creativity to life. It is an alternative to polyester or polyurethane for all types of decorative pieces. Ideal for use with silicone moulds.
Acrylic pigment for Jesmonite resin. Apply a maximum of 2% by weight. AC100 resin produces the most vivid colours as it has a higher acrylic resin content.
Pigments are sold by weight and each colour has a different density, so it may appear that some colours are only half full. This is particularly true of white, oxides and terracotta.
Jesmonite AC84 is a two-component water-based acrylic resin, ideal for creating stone-finished pieces from moulds. Its high resistance and detail fidelity allow for durable and realistic results, with a texture that simulates natural stone, but without the actual weight. It is easy to use, customisable with pigments and safe as it does not emit toxic vapours. Perfect for sculptors, designers and creators of artistic and decorative pieces.
Case containing all official pigments Jesmonite in 10 g presentations, for AC100, AC300 and AC84
Includes:
The first 100% biodegradable resin of plant origin! Resin based on linseed oil and a natural activator based on sugar beet molasses: an innovative, safe and sustainable way to create your own decorative, utilitarian and artistic objects. Reslin® is easy and creative to use, with no harmful substances! Your pieces will be ready in 60 minutes at a low temperature in a convection oven. These Reslin® sets contain enough material to create multiple Reslin® objects. They are ideal for both small and large projects. Create endless possibilities with Reslin®!
Neon-based mineral pigments. Perfect for use with Jesmonite AC100/AC200/AC300. You can unleash your creativity with truly striking colours (neon effect).
Please note: does not glow in the dark! No fluorescent pigments.
Very fine mineral powder in beautiful, bright pearlescent colours. Mix the mica powder with Reslin® to give your objects a shiny pearlescent effect.
Format: 9 g
Mix this glow-in-the-dark pigment with Reslin® and create your own glow-in-the-dark artwork. It provides a glow-in-the-dark effect when properly charged and used in a dark room.
Format: 10 g
Natural glitter made from mica slate grain, which does not contain plastic. You can sprinkle it into your mould or mix it with your Reslin® to add a beautiful shine to your creation.
15 g format
Reslin® Tint, highly pigmented, solvent-based and with excellent coverage. Add a few drops of Reslin® Ink to the Reslin® mixture to colour it. You will obtain very vivid colours with excellent coverage. Size: 20 ml.
Whatsapp
English GB
Pack containing everything you need to start working with JESMONITE AC100:
JESMONITE, 2 silicone moulds and YELLOW, RED and BLUE pigments.
Shipping 24/48 h
Secure payment
Easy returns
Basic kit to start developing your pieces with Jesmonite, consisting of:
-840 g of Jesmonite AC100 (240 g of liquid and 600 g of powder)
-Instruction manual
-3 Jesmonite pigments (blue, red, yellow)
-2 silicone moulds
-Size M gloves
-2 mixing sticks
*The blue and red pieces are not included because they are the result of the moulds. With the contents, you can make 4 square pieces or 6 hexagonal pieces.
Jesmonite AC100 is the ideal resin to bring your creativity to life. It is an alternative to polyester or polyurethane for all types of decorative pieces. Ideal for use with silicone moulds.
Silgrey (Standard) is a flexible, non-stick and highly accurate RTV silicone for mould making. Ideal for creating silicone moulds and reproducing detailed pieces for projects using epoxy resin, polyester resin and Jesmonite. Catalyst included.
Silicone mould in the shape of an oval tray, 17.5 cm long and 9 cm wide
Ideal for resin reproductions of all kinds, especially epoxy and Jesmonite.
Pack containing everything you need to start working with JESMONITE AC100:
JESMONITE, 1 silicone mould and pigments.
Pack containing everything you need to start working with JESMONITE AC100:
JESMONITE, 1 silicone mould and pigments.
60x40cm silicone mat, ideal for working with any resin, easy to clean.
Purchase the Jesmonite AC100 resin liquid separately here, in the format you require, either because you have run out or because you are making a different mixture than the one recommended to achieve different results. Jesmonite AC100 resin liquid for mixing with Jesmonite AC Base, ideal for high-strength applications, fiberglass, and porex coatings.
Thickening additive "Thixotropic" for resin referencesJesmonite, AC100, AC200, AC300. Prevents sagging. Saves time and material. Recommended mixing ratio of 2 to 6 grams per kilogram of mixture.
Jesmonite AC100 is the ideal resin to bring your creativity to life. It is an alternative to polyester or polyurethane for all types of decorative pieces. Ideal for use with silicone moulds.
Pack containing everything you need to start working with JESMONITE AC100:
JESMONITE, 1 silicone mould and pigments.
Acrylic sealant with GLOSS finish for Jesmonite to protect parts made with JesThe Jesmonite Sealer – Acrylic GLOSS SEALER with glossy finish is a water-based acrylic sealer designed to protect and enhance Jesmonite surfaces. Provides water and stain resistance with an intense glossy finish that highlights colors and details. Ideal for trays, pots, decorative objects, and artistic creations.monite AC100, AC200 and AC300.
Fibreglass specifically designed for Jesmonite AC100 and AC730 resins. This type of glass reinforcement has been custom-designed for use with Jesmonite. Very easy to adapt and work with. Fireproof.
Pack containing everything you need to start working with JESMONITE AC100:
Metallic filler for Jesmonite systems and polyester resins. Available in bronze, copper or brass. High-purity metal particles for realistic metallic finishes with authentic metal effect.
Pack containing everything you need to start working with JESMONITE AC100:
JESMONITE, 1 silicone mould and pigments.
Mixing blade for Jesmonite, compatible with any drill, available in 35 mm and 65 mm. Ensures fast, homogeneous, bubble-free mixing. Made of stainless material, also suitable for epoxy resin.
155 mm wooden sticks for mixing resins (Jesmonite, epoxy, polyester) and craft materials. Pack of 25 pieces.
The silver flakes are so fine and soft and can be mixed excellently with Jesmonite or other resins. Achieve an elegant and striking end result!
Perfect for use with JESMONITE AC100
5g format
Powerful and environmentally friendly detergent. Safe for cleaning all types of moulds. Removes JESMONITE residues, pigments, glitter and metallic powders from the mould.
Jesmonite AC100 / AC300 Base (powder only) to mix with Jesmonite liquid resin. Purchase just the base in the format you need to adjust mixes and results.
Jesmonite spray varnish for parts. Matt finish
Easy to apply. 150 ml format
Silicone stick for mixing all types of resins. Very easy to clean and reuse to avoid waste.
Silspray 400 ml silicone oil release spray, ideal for easy demolding and extending the life of silicone molds.
Set of 4 stainless steel putty knives for polyester filler. Ideal for applying, spreading and smoothing resins, fillers and gelcoat (1 unit).
6 mm chopped fiberglass strands for reinforcement of resins, fillers, composites and Jesmonite. Improves mechanical strength and durability. Available in 1 kg and 20 kg formats.
Silclear 22 AB is an addition-cure silicone for mould making, formulated to produce highly accurate reproductions and withstand numerous demoulding cycles. Its low viscosity, excellent tear resistance and dimensional stability make it an ideal choice for prototyping, part reproduction and the manufacture of durable moulds.
Brown modelling clay – Modelling Clay Classic 1 kg, odorless, highly flexible, and compatible with RTV silicone. Never dries out.
Pack containing everything you need to start working with JESMONITE AC100:
JESMONITE, 2 silicone moulds and YELLOW, RED and BLUE pigments.
Català
Español
Français
Português PT
