Silicone mixing stick

Reslin® Tint, highly pigmented, solvent-based and with excellent coverage. Add a few drops of Reslin® Ink to the Reslin® mixture to colour it. You will obtain very vivid colours with excellent coverage. Size: 20 ml.

Case with 10 officialJesmonitepigments in 50g packs, for AC100, AC300 and AC84

Includes: 

1 x 50 g Black 

1 x 50 g White

1 x 50 g Bright Yellow

1 x 50 g Rust Yellow

1 x 50 g Terracotta

1 x 50 g Coade (coffee)

1 x 50 g Green

1 x 50 g Blue

1 x 50 g Bright Red

1 x 50 g Rust Red

Jesmonite AC84 is a two-component water-based acrylic resin, ideal for creating stone-finished pieces from moulds. Its high resistance and detail fidelity allow for durable and realistic results, with a texture that simulates natural stone, but without the actual weight. It is easy to use, customisable with pigments and safe as it does not emit toxic vapours. Perfect for sculptors, designers and creators of artistic and decorative pieces.

155 mm wooden sticks for mixing resins (Jesmonite, epoxy, polyester) and craft materials. Pack of 25 pieces.

Powerful and environmentally friendly detergent. Safe for cleaning all types of moulds. Removes JESMONITE residues, pigments, glitter and metallic powders from the mould.

Glitter chips are as fine as sand, but also slightly thicker, up to about 3 mm, and can be mixed excellently with Jesmonite or other resins. Glitter chips give your creation an elegant and eye-catching finish!

Perfect for use with JESMONITE AC100

Format 30g

60x40cm silicone mat, ideal for working with any resin, easy to clean.

The QCC colour system has 200 colours. It starts with a colourless base to which pigments are added to achieve the chosen colour.

The price of gelcoats varies depending on the pigments used to achieve each colour.

The colour must be chosen carefully. It is important to bear in mind that the colours displayed on a computer screen may differ from the colour of the product.

Jesmonite spray varnish for parts. Matt finish

Easy to apply. 150 ml format

The vibrating platform is extremely helpful for removing bubbles from moulds, achieving a homogeneous mixture and improving the results of all your pieces with Jesmonite. You can also use it when making silicone moulds to ensure that the silicone reaches even the smallest corners.

Mix this glow-in-the-dark pigment with Reslin® and create your own glow-in-the-dark artwork. It provides a glow-in-the-dark effect when properly charged and used in a dark room.

Format: 10 g

Neon-based mineral pigments. Perfect for use with Jesmonite AC100/AC200/AC300. You can unleash your creativity with truly striking colours (neon effect).

Please note: does not glow in the dark! No fluorescent pigments.

Case containing all official pigments Jesmonite in 10 g presentations, for AC100, AC300 and AC84

Includes: 

• 2 x 10 g Black 
• 2 x 10 g White
• 1 x 10 g Bright Yellow
• 1 x 10 g Rust Yellow
• 1 x 10 g Orange
• 1 x 10 g Terracotta
• 1 x 10 g Coade (brown)
• 1 x 10 g Green
• 1 x 10 g Blue
• 1 x 10 g Lilac
• 1 x 10 g Pink
• 1 x 10 g Bright Red
• 1 x 10 g Rust Red

Natural glitter made from mica slate grain, which does not contain plastic. You can sprinkle it into your mould or mix it with your Reslin® to add a beautiful shine to your creation.

15 g format

The silver flakes are so fine and soft and can be mixed excellently with Jesmonite or other resins. Achieve an elegant and striking end result!

Perfect for use with JESMONITE AC100

5g format

Polyvinyl alcohol (PVA) release agent that forms an anti-adhesive film between mold and casting. Ideal for polyester, epoxy and fiberglass resins. Works as a complement to wax release agents.

High-performance two-component epoxy resin for fiberglass, carbon fiber and aramid. Ideal for structural laminates, marine applications, automotive industry and technical parts. Excellent impregnation, high mechanical strength and long-lasting professional finish.

Jesmonite AC100 is the ideal resin to bring your creativity to life. It is an alternative to polyester or polyurethane for all types of decorative pieces. Ideal for use with silicone moulds.

The TR104 Release Wax 400g is a premium high-temperature carnauba-based paste wax designed to ensure easy release in polyester and epoxy resin processes.Ideal for applying between 3 and 5 coats. Sponge applicator included.

It is recommended to apply between 3 and 5 coats and allow a drying time of 15 minutes between coats.

Finer fibre for first coat or gelcoat reinforcement. Low resin consumption, very useful for reaching all corners. Also suitable for use with Jesmonite resin.