English GB
Jesmonite AC100 is the ideal resin to give life to your creativity. It is an alternative to polyester or polyurethane for all kinds of decorative pieces. Ideal with silicone molds.
Acrylic pigment for Jesmonite resin. It is applied to a maximum of 2% by weight. With the AC100 resin the most vivid colors are obtained by having a higher acrylic resin content.
Pigments are sold by weight and each color has a different density, so for some colors it may appear that the bottle is only half full. Especially white, oxides and terracotta.
Jesmonite AC84 is a two-component, water-based acrylic resin, perfect for creating stone-like pieces from molds. Known for its high durability and precise detail reproduction, it offers a realistic stone finish without the heavy weight. Easy to use, customizable with pigments, and safe, as it emits no toxic fumes. Ideal for sculptors, designers, and creators of artistic and decorative pieces.
Case with all the official Jesmonite pigments in 10gr presentation, for AC100, AC300 and AC84
includes:
The first 100% biodegradable plant-based resin! Linseed oil-based resin and a natural activator based on sugar beet molasses: an innovative, safe, and sustainable way to create your own decorative, utilitarian, and artistic objects. Using Reslin® is simple and creative, without harmful substances! Your pieces will be ready in 60 minutes at a low temperature in the convection oven. These Reslin® sets contain enough material to create multiple Reslin® objects. They are ideal for both small and big projects. Create endless possibilities with Reslin®!
Mineral pigments with neon-colored base. Perfect for use with Jesmonite AC100/AC200/AC300. You can give free rein to your creativity with really bright colors (neon effect).
Please note: does not light up in the dark! No fluorescent pigments.
Mix this glow in the dark pigment with Reslin® and create your own glow in the dark artwork. Gives a glow in the dark effect when properly charged and used in a very dark room.
Natural glitter made from mica slate grit, which contains no plastic. You can sprinkle it into your mold or mix it through your Reslin® to add a beautiful shine to your creation.
Size 15 GR
Reslin® Tint is a highly pigmented, solvent-based, high-coverage ink. Add a few drops of Reslin® Tint to the Reslin® mixture to color it. You'll get vibrant, high-coverage colors. vol 20ml
Whatsapp
English GB
Acrylic pigment for Jesmonite resin. It is applied to a maximum of 2% by weight. With the AC100 resin the most vivid colors are obtained by having a higher acrylic resin content.
Pigments are sold by weight and each color has a different density, so for some colors it may appear that the bottle is only half full. Especially white, oxides and terracotta.
24/48 h Shipping
Secure payment
Easy returns
We recommend to use original Jesmonite pigments, as their high pigment concentration means very little is needed to achieve the desired color.
Tips for Jesmonite pigments:
To achieve a pure black, always calculate 2% of the total mix weight; otherwise, gray tones often appear when the Jesmonite dries.
If you are inexperienced with pigments, it is recommended to first tint the liquid, mixing several colors if necessary, and once the desired color is achieved, add the powder (AC BASE). Once everything is mixed, the tone can be corrected by adding more pigments.
How to achieve perfect blends with Jesmonite pigment?
To achieve smooth mixtures without lumps or white spots, we recommend using the Jesmonite MIXING BLADE.
How do I store Jesmonite pigments?
A good way to keep your pigments in perfect condition is to shake them regularly to ensure you always use the perfect mix/concentration. Some colors, due to their solid pigment formulation, tend to clump at the bottom of the container. Remember to shake them regularly, and of course, always before use.
Important note:
The green pigment is much thicker than others; if you have difficulty with green, it's much better to use yellow and blue.
Jesmonite AC100 is the ideal resin to give life to your creativity. It is an alternative to polyester or polyurethane for all kinds of decorative pieces. Ideal with silicone molds.
AC300 is the solution for castings and castings of acrylic resin in mold, to obtain solid pieces with a lower cost than AC100. You can do casting of any size.
Oval silicone mold 17.5 cm long and 9 cm wide
Ideal for resin reproductions of all kinds, especially epoxy and Jesmonite.
Case with all the official Jesmonite pigments in 10gr presentation, for AC100, AC300 and AC84
includes:
155mm long wooden sticks for mixing all types of resins. Pack of 25 units
4Pack that includes everything you need to start working with JESMONITE AC100:
Jesmonite, 1 silicone mold, and pigments
Glitter chips are fine like sand, also a little coarser up to about 3mm and can be mixed excellently with Jesmonite or other resins. Glitter chips give your creation an elegant and attractive final result!
Perfect for use with JESMONITE AC100
Size 30gr
Acrylic sealant for Jesmonite to protect parts made with Jesmonite AC100, AC200 and AC300.
The vibrating platform is a great help to remove bubbles in the moulds, achieve a homogeneous mixture and improve the result of all your pieces with Jesmonite.
60x40cm silicone mat, ideal for working with any resin and easy to clean.
Pure metal filler for Jesmonite resins. 99,9% of metal powder to achieve amazing real metal effects.
Pack that includes everything you need to start working with JESMONITE AC100:
-2 KITS OF 3.5 AC100
-MIXING BLADE
-1 PIGMENT OF 50GR
-1 THIXOTROPIC OF 50GR
-1M² QUADRIAXIAL FIBER GLASS
-100GR GLASS FIBER CHOPPED STRANDS
Case with 10 official Jesmonite pigments in 50gr presentation, for AC100, AC300 and AC84
includes:
1 x 50g Black
1 x 50g White
1 x 50g Bright Yellow
1 x 50g Oxide Yellow
1 x 50g Terracotta
1 x 50g Coade (coffee)
1 x 50g Green
1 x 50g Blue
1 x 50g Bright Red
1 x 50g Oxide Red
Acrylic sealant GLOSS for Jesmonite to protect parts made with Jesmonite AC100, AC200 and AC300.
Pack that includes everything you need to start working with JESMONITE AC100:
Jesmonite, 1 silicone mold, and pigments
Buy the Liquid of the Jesmonite AC100 resin separately, in the format you need, either because you have missed it or because you make a different mixture than the recommended one to achieve different results.
4Pack that includes everything you need to start working with JESMONITE AC100:
Jesmonite, 1 silicone mold, and pigments
Pack that includes everything you need to start working with JESMONITE AC100:
Jesmonite AC100, 2 silicone molds & pigments BRIGHT YELLOW, BRIGHT RED and BLUE
Jesmonite AC100 is the ideal resin to give life to your creativity. It is an alternative to polyester or polyurethane for all kinds of decorative pieces. Ideal with silicone molds.
4Pack that includes everything you need to start working with JESMONITE AC100:
Jesmonite, 1 silicone mold, and pigments
Transparent epoxy resin. Low viscosity and adherence to pieces of jewelry. It has very good UV stability.
Acrylic sealant for Jesmonite to protect parts made with Jesmonite AC100, AC200 and AC300.
155mm long wooden sticks for mixing all types of resins. Pack of 25 units
Case with 10 official Jesmonite pigments in 50gr presentation, for AC100, AC300 and AC84
includes:
1 x 50g Black
1 x 50g White
1 x 50g Bright Yellow
1 x 50g Oxide Yellow
1 x 50g Terracotta
1 x 50g Coade (coffee)
1 x 50g Green
1 x 50g Blue
1 x 50g Bright Red
1 x 50g Oxide Red
The vibrating platform is a great help to remove bubbles in the moulds, achieve a homogeneous mixture and improve the result of all your pieces with Jesmonite.
Clear polyester resin for casting. Great transparency For encapsulation, occlusion, imitation glass and translucent decorative objects
4Pack that includes everything you need to start working with JESMONITE AC100:
Jesmonite, 1 silicone mold, and pigments
Buy here the base of the Jesmonite AC100 resin separately, in the format you need, either because you have missed it or because you make a different mixture than recommended to achieve different results. Select the size according to your need
Acrylic pigment for Jesmonite resin. It is applied to a maximum of 2% by weight. With the AC100 resin the most vivid colors are obtained by having a higher acrylic resin content.
Pigments are sold by weight and each color has a different density, so for some colors it may appear that the bottle is only half full. Especially white, oxides and terracotta.
Català
Español
