Jesmonite AC100 Starter Kit 7 kg (Unit)

Thickening additive "Thixotropic" for resin referencesJesmonite, AC100, AC200, AC300. Prevents sagging. Saves time and material. Recommended mixing ratio of 2 to 6 grams per kilogram of mixture.

60x40cm silicone mat, ideal for working with any resin, easy to clean.

Fibreglass specifically designed for Jesmonite AC100 and AC730 resins. This type of glass reinforcement has been custom-designed for use with Jesmonite. Very easy to adapt and work with. Fireproof.

Jesmonite spray varnish for parts. Gloss finish. 

Easy to apply. 150 ml format.

Jesmonite AC100 / AC300 Base (powder only) to mix with Jesmonite liquid resin. Purchase just the base in the format you need to adjust mixes and results.

Silicone stick for mixing all types of resins. Very easy to clean and reuse to avoid waste.

Pack containing everything you need to start working with JESMONITE AC100:

JESMONITE, 1 silicone mould and pigments. 

Case with 10 officialJesmonitepigments in 50g packs, for AC100, AC300 and AC84

Includes: 

1 x 50 g Black 

1 x 50 g White

1 x 50 g Bright Yellow

1 x 50 g Rust Yellow

1 x 50 g Terracotta

1 x 50 g Coade (coffee)

1 x 50 g Green

1 x 50 g Blue

1 x 50 g Bright Red

1 x 50 g Rust Red

The vibrating platform is extremely helpful for removing bubbles from moulds, achieving a homogeneous mixture and improving the results of all your pieces with Jesmonite. You can also use it when making silicone moulds to ensure that the silicone reaches even the smallest corners.

Glitter chips are as fine as sand, but also slightly thicker, up to about 3 mm, and can be mixed excellently with Jesmonite or other resins. Glitter chips give your creation an elegant and eye-catching finish!

Perfect for use with JESMONITE AC100

Format 30g

The Jesmonite Sealer – Acrylic SEALER with satin finish is a water-based acrylic protective coating specially formulated for Jesmonite surfaces. It provides water resistance, stain protection, and an elegant satin finish that enhances the natural color of your pieces. Ideal for decorative objects, trays, pots, and handcrafted creations.

Purchase the Jesmonite AC100 resin liquid separately here, in the format you require, either because you have run out or because you are making a different mixture than the one recommended to achieve different results. Jesmonite AC100 resin liquid for mixing with Jesmonite AC Base, ideal for high-strength applications, fiberglass, and porex coatings.

Case containing all official pigments Jesmonite in 10 g presentations, for AC100, AC300 and AC84

Includes: 

• 2 x 10 g Black 
• 2 x 10 g White
• 1 x 10 g Bright Yellow
• 1 x 10 g Rust Yellow
• 1 x 10 g Orange
• 1 x 10 g Terracotta
• 1 x 10 g Coade (brown)
• 1 x 10 g Green
• 1 x 10 g Blue
• 1 x 10 g Lilac
• 1 x 10 g Pink
• 1 x 10 g Bright Red
• 1 x 10 g Rust Red

Pack containing everything you need to start working with JESMONITE AC100:

JESMONITE, 1 silicone mould and pigments. 

Acrylic sealant with GLOSS finish for Jesmonite to protect parts made with JesThe Jesmonite Sealer – Acrylic GLOSS SEALER with glossy finish is a water-based acrylic sealer designed to protect and enhance Jesmonite surfaces. Provides water and stain resistance with an intense glossy finish that highlights colors and details. Ideal for trays, pots, decorative objects, and artistic creations.monite AC100, AC200 and AC300.

The silver flakes are so fine and soft and can be mixed excellently with Jesmonite or other resins. Achieve an elegant and striking end result!

Perfect for use with JESMONITE AC100

5g format

Powerful and environmentally friendly detergent. Safe for cleaning all types of moulds. Removes JESMONITE residues, pigments, glitter and metallic powders from the mould.

155 mm wooden sticks for mixing resins (Jesmonite, epoxy, polyester) and craft materials. Pack of 25 pieces.

Standard RTV (Room Temperature Vulcanisation) silicone for all types of quick-setting, flexible, non-stick moulds.

Metallic filler for Jesmonite systems and polyester resins. Available in bronze, copper or brass. High-purity metal particles for realistic metallic finishes with authentic metal effect.

Acrylic sealant with GLOSS finish for Jesmonite to protect parts made with JesThe Jesmonite Sealer – Acrylic GLOSS SEALER with glossy finish is a water-based acrylic sealer designed to protect and enhance Jesmonite surfaces. Provides water and stain resistance with an intense glossy finish that highlights colors and details. Ideal for trays, pots, decorative objects, and artistic creations.monite AC100, AC200 and AC300.

Get more working time with the retarder for resin referencesJesmonite, AC100, AC200, AC300. Recommended mixing ratio of 2 to 8 grams per kilogram of mixture.