Jesmonite AC730 Stone kit for stone-effect molds and finishes

Mineral powder base for the Jesmonite AC730 system, supplied without the liquid component. Designed for high-resistance stone-effect finishes. Contact us for availability, as it is usually sold as a complete kit.

155 mm wooden sticks for mixing resins (Jesmonite, epoxy, polyester) and craft materials. Pack of 25 pieces.

Complete resin application kit (polyester, epoxy, Jesmonite) with PP cups, latex gloves, double brush and wooden mixing sticks.

Powerful and environmentally friendly detergent. Safe for cleaning all types of moulds. Removes JESMONITE residues, pigments, glitter and metallic powders from the mould.

Liquid component of the Jesmonite AC730 system in 500 g format. Must be combined with AC730 powder base for correct use. Ideal for refills or mix adjustments.

60x40cm silicone mat, ideal for working with any resin, easy to clean.

Case containing all official pigments Jesmonite in 10 g presentations, for AC100, AC300 and AC84

Includes: 

• 2 x 10 g Black 
• 2 x 10 g White
• 1 x 10 g Bright Yellow
• 1 x 10 g Rust Yellow
• 1 x 10 g Orange
• 1 x 10 g Terracotta
• 1 x 10 g Coade (brown)
• 1 x 10 g Green
• 1 x 10 g Blue
• 1 x 10 g Lilac
• 1 x 10 g Pink
• 1 x 10 g Bright Red
• 1 x 10 g Rust Red

Jesmonite AC84 is a two-component water-based acrylic resin, ideal for creating stone-finished pieces from moulds. Its high resistance and detail fidelity allow for durable and realistic results, with a texture that simulates natural stone, but without the actual weight. It is easy to use, customisable with pigments and safe as it does not emit toxic vapours. Perfect for sculptors, designers and creators of artistic and decorative pieces.

Acid for removing the surface layer of acrylic resin in applications with stone fillers. This achieves a finish with more filler particles visible.

Case with 10 officialJesmonitepigments in 50g packs, for AC100, AC300 and AC84

Includes: 

1 x 50 g Black 

1 x 50 g White

1 x 50 g Bright Yellow

1 x 50 g Rust Yellow

1 x 50 g Terracotta

1 x 50 g Coade (coffee)

1 x 50 g Green

1 x 50 g Blue

1 x 50 g Bright Red

1 x 50 g Rust Red

Mixing blade for Jesmonite, compatible with any drill, available in 35 mm and 65 mm. Ensures fast, homogeneous, bubble-free mixing. Made of stainless material, also suitable for epoxy resin.

The vibrating platform is extremely helpful for removing bubbles from moulds, achieving a homogeneous mixture and improving the results of all your pieces with Jesmonite. You can also use it when making silicone moulds to ensure that the silicone reaches even the smallest corners.

Retarding additive for Jesmonite AC730 system. Extends working time of the mix, allowing better handling and pouring in complex moulds.

Solution for modifying the viscosity of RTV silicones. Especially recommended for SILTHIXO silicone. Saves time and silicone.

Thickening additive "Thixotropic" for resin referencesJesmonite, AC100, AC200, AC300. Prevents sagging. Saves time and material. Recommended mixing ratio of 2 to 6 grams per kilogram of mixture.

Nylon fibre abrasive wheel for sanding Jesmonite Metal surfaces. Can be used on flat and uneven interior surfaces. 6 mm shank. Compatible with most electric drills.

The vibrating platform is extremely helpful for removing bubbles from moulds, achieving a homogeneous mixture and improving the results of all your pieces with Jesmonite. You can also use it when making silicone moulds to ensure that the silicone reaches even the smallest corners.

Jesmonite AC100 / AC300 Base (powder only) to mix with Jesmonite liquid resin. Purchase just the base in the format you need to adjust mixes and results.

Liquid component of the Jesmonite AC730 system in 500 g format. Must be combined with AC730 powder base for correct use. Ideal for refills or mix adjustments.