AC730 ACID ETCH

The vibrating platform is extremely helpful for removing bubbles from moulds, achieving a homogeneous mixture and improving the results of all your pieces with Jesmonite. You can also use it when making silicone moulds to ensure that the silicone reaches even the smallest corners.

Case containing all official pigments Jesmonite in 10 g presentations, for AC100, AC300 and AC84

Includes: 

• 2 x 10 g Black 
• 2 x 10 g White
• 1 x 10 g Bright Yellow
• 1 x 10 g Rust Yellow
• 1 x 10 g Orange
• 1 x 10 g Terracotta
• 1 x 10 g Coade (brown)
• 1 x 10 g Green
• 1 x 10 g Blue
• 1 x 10 g Lilac
• 1 x 10 g Pink
• 1 x 10 g Bright Red
• 1 x 10 g Rust Red

Case with 10 officialJesmonitepigments in 50g packs, for AC100, AC300 and AC84

Includes: 

1 x 50 g Black 

1 x 50 g White

1 x 50 g Bright Yellow

1 x 50 g Rust Yellow

1 x 50 g Terracotta

1 x 50 g Coade (coffee)

1 x 50 g Green

1 x 50 g Blue

1 x 50 g Bright Red

1 x 50 g Rust Red

Purchase the Jesmonite AC730 resin liquid separately, in the format you need, either because you have run out or because you are making a different mixture than the one recommended to achieve different results.

Purchase the Jesmonite AC730 resin base separately, in the format you need, either because you have run out or because you are making a different mixture than the one recommended to achieve different results.

Kit for applying resins, whether polyester, epoxy or Jesmonite

2 resin-resistant polypropylene (PP) cups

1 pair of size L latex gloves

1 double brush, size 15

2 wooden mixing sticks

Jesmonite AC84 is a two-component water-based acrylic resin, ideal for creating stone-finished pieces from moulds. Its high resistance and detail fidelity allow for durable and realistic results, with a texture that simulates natural stone, but without the actual weight. It is easy to use, customisable with pigments and safe as it does not emit toxic vapours. Perfect for sculptors, designers and creators of artistic and decorative pieces.

Extends working time with the retarder for resin referencesJesmonite, AC730, and AC730 FLEX. Recommended mixing ratio of 2 to 8 grams per kilogram of mixture.

155 mm long wooden sticks for mixing all types of resins. Pack of 25 units.

60x40cm silicone mat, ideal for working with any resin, easy to clean.

Mixing blades for acrylic resins, 65 or 35 mm. Thanks to their design, they prevent the formation of bubbles and achieve a homogeneous mixture in a few seconds. They fit any standard drill.

Powerful and environmentally friendly detergent. Safe for cleaning all types of moulds. Removes JESMONITE residues, pigments, glitter and metallic powders from the mould.

AC730 is the ideal resin for fibreglass-reinforced decorative mouldings, ornaments and all types of sculptures. It is suitable for outdoor use and available in a wide range of stone finishes. It can be used for small castings, although it performs best in fibreglass laminates.