English GB
Jesmonite AC100 is the ideal resin to bring your creativity to life. It is an alternative to polyester or polyurethane for all types of decorative pieces. Ideal for use with silicone moulds.
Acrylic pigment for Jesmonite resin. Apply a maximum of 2% by weight. AC100 resin produces the most vivid colours as it has a higher acrylic resin content.
Pigments are sold by weight and each colour has a different density, so it may appear that some colours are only half full. This is particularly true of white, oxides and terracotta.
Jesmonite AC84 is a two-component water-based acrylic resin, ideal for creating stone-finished pieces from moulds. Its high resistance and detail fidelity allow for durable and realistic results, with a texture that simulates natural stone, but without the actual weight. It is easy to use, customisable with pigments and safe as it does not emit toxic vapours. Perfect for sculptors, designers and creators of artistic and decorative pieces.
Case containing all official pigments Jesmonite in 10 g presentations, for AC100, AC300 and AC84
Includes:
The first 100% biodegradable resin of plant origin! Resin based on linseed oil and a natural activator based on sugar beet molasses: an innovative, safe and sustainable way to create your own decorative, utilitarian and artistic objects. Reslin® is easy and creative to use, with no harmful substances! Your pieces will be ready in 60 minutes at a low temperature in a convection oven. These Reslin® sets contain enough material to create multiple Reslin® objects. They are ideal for both small and large projects. Create endless possibilities with Reslin®!
Neon-based mineral pigments. Perfect for use with Jesmonite AC100/AC200/AC300. You can unleash your creativity with truly striking colours (neon effect).
Please note: does not glow in the dark! No fluorescent pigments.
Very fine mineral powder in beautiful, bright pearlescent colours. Mix the mica powder with Reslin® to give your objects a shiny pearlescent effect.
Format: 9 g
Mix this glow-in-the-dark pigment with Reslin® and create your own glow-in-the-dark artwork. It provides a glow-in-the-dark effect when properly charged and used in a dark room.
Format: 10 g
Natural glitter made from mica slate grain, which does not contain plastic. You can sprinkle it into your mould or mix it with your Reslin® to add a beautiful shine to your creation.
15 g format
Reslin® Tint, highly pigmented, solvent-based and with excellent coverage. Add a few drops of Reslin® Ink to the Reslin® mixture to colour it. You will obtain very vivid colours with excellent coverage. Size: 20 ml.
Whatsapp
English GB
Clear LDPE infusion and vacuum hose 10 mm inner / 12 mm outer, ideal for resin infusion and vacuum processes. Maximum temperature 60 °C. Sold per linear meter.
Shipping 24/48 h
Secure payment
Easy returns
The clear LDPE infusion and vacuum hose is perfect for resin distribution and vacuum generation in composite processes. Made from low-density polyethylene (LDPE), it provides flexibility and durability for small and medium surfaces, with 10 mm inner diameter and 12 mm outer diameter.
6-9 mm vacuum hose for infusion, ideal for small systems. Reduces resin consumption thanks to its smaller inner diameter.
Infusion hose clamp – sturdy tool for quickly and securely shutting off resin or air flow in composite infusion systems.
12 mm low-density polyethylene spiral tube for resin distribution in infusion processes. Flexible, durable, and easy to install.
SR 8100 epoxy resin with SD 8824 hardener (Standard) specifically for resin infusion.
12 mm low-density polyethylene spiral tube for resin distribution in infusion processes. Flexible, durable, and easy to install.
Infusion hose clamp – sturdy tool for quickly and securely shutting off resin or air flow in composite infusion systems.
7 mm male barb with 1/4″ thread for vacuum and infusion systems. Ideal for connecting hoses and fittings (1 unit).
12 mm infusion pyramid – anti‑adhesive fitting to connect resin distribution systems to inlet and outlet hoses. Reusable and durable.
6-9 mm vacuum hose for infusion, ideal for small systems. Reduces resin consumption thanks to its smaller inner diameter.
Useful piece for dividing the resin distribution circuit in infusion
Basic consumables kit for your first resin infusion or small projects (1 m²) with vacuum bag, tacky tape, tubes, peelply, and Flowmesh drainage mesh.
Polyvinyl alcohol (PVA) release agent that forms an anti-adhesive film between mold and casting. Ideal for polyester, epoxy and fiberglass resins. Works as a complement to wax release agents.
65 micron vacuum bag, 200 cm width (folded to 1 m), designed for resin infusion and vacuum compaction in epoxy, polyester, and composite applications.
Flowmesh Light infusion mesh (125 cm), flexible and easy to use, ideal for complex surfaces with guided resin flow direction.
White modelling clay – Modelling Clay Classic 1 kg, odorless, flexible, and suitable for any application. Never dries out.
Glass microspheres. Filler for making putty, filleting and reinforcing polyester and epoxy resins.
Complete vacuum pump kit for composites with all accessories needed for resin infusion and vacuum compaction of fiberglass and carbon fiber using polyester and epoxy resins.
Clear LDPE infusion and vacuum hose 10 mm inner / 12 mm outer, ideal for resin infusion and vacuum processes. Maximum temperature 60 °C. Sold per linear meter.
Català
Español
Português PT
