English GB
Jesmonite AC100 is the ideal resin to bring your creativity to life. It is an alternative to polyester or polyurethane for all types of decorative pieces. Ideal for use with silicone moulds.
Acrylic pigment for Jesmonite resin. Apply a maximum of 2% by weight. AC100 resin produces the most vivid colours as it has a higher acrylic resin content.
Pigments are sold by weight and each colour has a different density, so it may appear that some colours are only half full. This is particularly true of white, oxides and terracotta.
Jesmonite AC84 is a two-component water-based acrylic resin, ideal for creating stone-finished pieces from moulds. Its high resistance and detail fidelity allow for durable and realistic results, with a texture that simulates natural stone, but without the actual weight. It is easy to use, customisable with pigments and safe as it does not emit toxic vapours. Perfect for sculptors, designers and creators of artistic and decorative pieces.
Case containing all official pigments Jesmonite in 10 g presentations, for AC100, AC300 and AC84
Includes:
The first 100% biodegradable resin of plant origin! Resin based on linseed oil and a natural activator based on sugar beet molasses: an innovative, safe and sustainable way to create your own decorative, utilitarian and artistic objects. Reslin® is easy and creative to use, with no harmful substances! Your pieces will be ready in 60 minutes at a low temperature in a convection oven. These Reslin® sets contain enough material to create multiple Reslin® objects. They are ideal for both small and large projects. Create endless possibilities with Reslin®!
Neon-based mineral pigments. Perfect for use with Jesmonite AC100/AC200/AC300. You can unleash your creativity with truly striking colours (neon effect).
Please note: does not glow in the dark! No fluorescent pigments.
Very fine mineral powder in beautiful, bright pearlescent colours. Mix the mica powder with Reslin® to give your objects a shiny pearlescent effect.
Format: 9 g
Mix this glow-in-the-dark pigment with Reslin® and create your own glow-in-the-dark artwork. It provides a glow-in-the-dark effect when properly charged and used in a dark room.
Format: 10 g
Natural glitter made from mica slate grain, which does not contain plastic. You can sprinkle it into your mould or mix it with your Reslin® to add a beautiful shine to your creation.
15 g format
Reslin® Tint, highly pigmented, solvent-based and with excellent coverage. Add a few drops of Reslin® Ink to the Reslin® mixture to colour it. You will obtain very vivid colours with excellent coverage. Size: 20 ml.
Whatsapp
English GB
Polyvinyl alcohol (PVA) release agent that forms an anti-adhesive film between mold and casting. Ideal for polyester, epoxy and fiberglass resins. Works as a complement to wax release agents.
Shipping 24/48 h
Secure payment
Easy returns
The polyvinyl alcohol (PVA) is a liquid release agent used to create a thin, continuous and anti-adhesive film between the mold and the part during casting, laminating and composite manufacturing processes.
Its main function is to act as a physical separation barrier, preventing resins from sticking to the mold and enabling clean and safe demolding.
It is especially used in combination with mold release wax, forming a highly reliable protection system in high-demand molds.
Once applied, the polyvinyl alcohol dries and forms a flexible film that acts as a separating layer between mold and part.
It allows parts to be removed without damaging the mold, reducing risks of sticking and breakage in delicate or complex parts.
It is commonly used over waxed molds to improve demolding safety in demanding processes.
It is recommended to apply on clean and dry molds, preferably over a layer of mold release wax.
Apply a uniform coat using brush, sponge or spray, ensuring continuous coverage without uncovered areas.
Allow to dry completely until the protective film is formed before pouring resin.
The PVA film is partially removed with each demolding cycle, therefore it is necessary to reapply in every production cycle.
If residues remain, they can be easily removed with water, allowing the mold to be prepared for new uses or later finishes such as painting or bonding.
Suitable for processes with polyester resin, epoxy resin, fiberglass, vinylester and casting or laminating systems.
It is also used in complex mold making, prototypes, technical parts and applications requiring safe and controlled demolding.
Reduces adhesion risk between part and mold.
Works with thermoset resin systems and rigid or flexible molds.
Enables clean demolding in processes requiring precision and repeatability.
The TR104 Release Wax 400g is a premium high-temperature carnauba-based paste wax designed to ensure easy release in polyester and epoxy resin processes.Ideal for applying between 3 and 5 coats. Sponge applicator included.
It is recommended to apply between 3 and 5 coats and allow a drying time of 15 minutes between coats.
Semi-permanent water-based release agent Mikon W-65+ (500 g). High release performance, no transfer, high gloss finish. Ideal for epoxy and polyester resins (1 unit).
Release wax spray in a 400 ml aerosol format, ideal for facilitating demolding when working with polyester resin, epoxy resin, PMMA and polyurethanes. It provides a clean and efficient release, preventing the part from sticking to the mold and improving the final finish.
Its formula offers excellent anti-adhesive properties, is CFC-free, and allows fast, uniform and economical application. Perfect for mold manufacturing and resin casting in both professional environments and DIY projects.
The TR104 Release Wax 400g is a premium high-temperature carnauba-based paste wax designed to ensure easy release in polyester and epoxy resin processes.Ideal for applying between 3 and 5 coats. Sponge applicator included.
It is recommended to apply between 3 and 5 coats and allow a drying time of 15 minutes between coats.
Vaseline paste for use as a release agent between silicone and silicone, or to insulate clay or plaster in moulds with other resins.
Release wax spray in a 400 ml aerosol format, ideal for facilitating demolding when working with polyester resin, epoxy resin, PMMA and polyurethanes. It provides a clean and efficient release, preventing the part from sticking to the mold and improving the final finish.
Its formula offers excellent anti-adhesive properties, is CFC-free, and allows fast, uniform and economical application. Perfect for mold manufacturing and resin casting in both professional environments and DIY projects.
Semi-permanent water-based release agent Mikon W-65+ (500 g). High release performance, no transfer, high gloss finish. Ideal for epoxy and polyester resins (1 unit).
Silspray 400 ml silicone oil release spray, ideal for easy demolding and extending the life of silicone molds.
ProfessionHard modelling clay – Modelling Clay Industrial 1 kg, professional, high hardness. Ideal for manual and tool-based modeling. Color gray.
Infusion hose clamp – sturdy tool for quickly and securely shutting off resin or air flow in composite infusion systems.
3K 200 g/m² twill carbon fiber fabric model Hexcel HEXFORCE 43200 BW1250. High mechanical strength structural reinforcement with excellent 2x2 twill aesthetic finish and superior mold conformability. Ideal for automotive, marine, aerospace, sports and advanced composite manufacturing.
High-performance two-component epoxy resin for fiberglass, carbon fiber and aramid. Ideal for structural laminates, marine applications, automotive industry and technical parts. Excellent impregnation, high mechanical strength and long-lasting professional finish.
155 mm wooden sticks for mixing resins (Jesmonite, epoxy, polyester) and craft materials. Pack of 25 pieces.
Polyvinyl alcohol (PVA) release agent that forms an anti-adhesive film between mold and casting. Ideal for polyester, epoxy and fiberglass resins. Works as a complement to wax release agents.
Català
Español
Français
Português PT
