English GB
Jesmonite AC100 is the ideal resin to bring your creativity to life. It is an alternative to polyester or polyurethane for all types of decorative pieces. Ideal for use with silicone moulds.
Acrylic pigment for Jesmonite resin. Apply a maximum of 2% by weight. AC100 resin produces the most vivid colours as it has a higher acrylic resin content.
Pigments are sold by weight and each colour has a different density, so it may appear that some colours are only half full. This is particularly true of white, oxides and terracotta.
Jesmonite AC84 is a two-component water-based acrylic resin, ideal for creating stone-finished pieces from moulds. Its high resistance and detail fidelity allow for durable and realistic results, with a texture that simulates natural stone, but without the actual weight. It is easy to use, customisable with pigments and safe as it does not emit toxic vapours. Perfect for sculptors, designers and creators of artistic and decorative pieces.
Case containing all official pigments Jesmonite in 10 g presentations, for AC100, AC300 and AC84
Includes:
The first 100% biodegradable resin of plant origin! Resin based on linseed oil and a natural activator based on sugar beet molasses: an innovative, safe and sustainable way to create your own decorative, utilitarian and artistic objects. Reslin® is easy and creative to use, with no harmful substances! Your pieces will be ready in 60 minutes at a low temperature in a convection oven. These Reslin® sets contain enough material to create multiple Reslin® objects. They are ideal for both small and large projects. Create endless possibilities with Reslin®!
Neon-based mineral pigments. Perfect for use with Jesmonite AC100/AC200/AC300. You can unleash your creativity with truly striking colours (neon effect).
Please note: does not glow in the dark! No fluorescent pigments.
Very fine mineral powder in beautiful, bright pearlescent colours. Mix the mica powder with Reslin® to give your objects a shiny pearlescent effect.
Format: 9 g
Mix this glow-in-the-dark pigment with Reslin® and create your own glow-in-the-dark artwork. It provides a glow-in-the-dark effect when properly charged and used in a dark room.
Format: 10 g
Natural glitter made from mica slate grain, which does not contain plastic. You can sprinkle it into your mould or mix it with your Reslin® to add a beautiful shine to your creation.
15 g format
Reslin® Tint, highly pigmented, solvent-based and with excellent coverage. Add a few drops of Reslin® Ink to the Reslin® mixture to colour it. You will obtain very vivid colours with excellent coverage. Size: 20 ml.
Whatsapp
English GB
Basic consumables kit for your first resin infusion or small projects (1 m²) with vacuum bag, tacky tape, tubes, peelply, and Flowmesh drainage mesh.
Shipping 24/48 h
Secure payment
Easy returns
This kit contains everything needed for your first resin infusion, a small project, or a minor repair. Materials are designed for easy and efficient use, covering 1 m² of surface area.
Complete resin application kit (polyester, epoxy, Jesmonite) with PP cups, latex gloves, double brush and wooden mixing sticks.
COMPLEX 3-in-1 infusion mesh (150x100 cm) combining flow media, perforated film, and peel ply alternative, reducing time, resin usage, and labor.
Flowmesh Light infusion mesh (125 cm), flexible and easy to use, ideal for complex surfaces with guided resin flow direction.
Complete vacuum pump kit for composites with all accessories needed for resin infusion and vacuum compaction of fiberglass and carbon fiber using polyester and epoxy resins.
SR 8100 epoxy resin with SD 8824 hardener (Standard) specifically for resin infusion.
Composite adhesive/fixative spray – TensorGrip TC42 500 ml, high‑performance adhesive for infusion and RTM holding reinforcement fibres without impacting surface finish or integrity.
65 micron vacuum bag, 200 cm width (folded to 1 m), designed for resin infusion and vacuum compaction in epoxy, polyester, and composite applications.
Soric SF core 2 mm × 127 cm (linear meter) for infusion and composite laminates, ideal as a resin flow medium and separation layer.
Infusion hose clamp – sturdy tool for quickly and securely shutting off resin or air flow in composite infusion systems.
Tubular vacuum bag 50 micron, orange color, 30 cm wide, perfect for resin infusion and vacuum processes. Sold in linear meters.
Blue perforated polyethylene release film 28 µ, 150 cm wide, ideal for liquid resin infusion. Sold in linear meters.
Mini resin trap for composites, compact and economical, 400 ml capacity, with a customizable lid for different hose diameters.
Peel Ply 84 g/m² – 120 cm wide (linear meter) for easy separation of fiberglass or carbon fiber from other consumables, leaving a rough surface ideal for bonding.
Tubular infusion inlet mesh (2x7.5 cm) in yellow, ideal for vacuum processes and uniform resin distribution in composite manufacturing.
6-9 mm vacuum hose for infusion, ideal for small systems. Reduces resin consumption thanks to its smaller inner diameter.
SR 8100 epoxy resin with SD 8824 hardener (Standard) specifically for resin infusion.
155 mm wooden sticks for mixing resins (Jesmonite, epoxy, polyester) and craft materials. Pack of 25 pieces.
12 mm infusion pyramid – anti‑adhesive fitting to connect resin distribution systems to inlet and outlet hoses. Reusable and durable.
Complete vacuum pump kit for composites with all accessories needed for resin infusion and vacuum compaction of fiberglass and carbon fiber using polyester and epoxy resins.
Clear LDPE infusion and vacuum hose 10 mm inner / 12 mm outer, ideal for resin infusion and vacuum processes. Maximum temperature 60 °C. Sold per linear meter.
12 mm low-density polyethylene spiral tube for resin distribution in infusion processes. Flexible, durable, and easy to install.
Release wax spray in a 400 ml aerosol format, ideal for facilitating demolding when working with polyester resin, epoxy resin, PMMA and polyurethanes. It provides a clean and efficient release, preventing the part from sticking to the mold and improving the final finish.
Its formula offers excellent anti-adhesive properties, is CFC-free, and allows fast, uniform and economical application. Perfect for mold manufacturing and resin casting in both professional environments and DIY projects.
155 mm wooden sticks for mixing resins (Jesmonite, epoxy, polyester) and craft materials. Pack of 25 pieces.
Aerosil, also known as Cabosil, is a pyrogenic silica powder additive for thickening epoxy, polyester, and other resins. 350 g format.
Fine polyester filler 330 g with catalyst, ideal for surface finishing, fiberglass repair, and mold correction with easy sanding.
COMPLEX 3-in-1 infusion mesh (150x100 cm) combining flow media, perforated film, and peel ply alternative, reducing time, resin usage, and labor.
Basic consumables kit for your first resin infusion or small projects (1 m²) with vacuum bag, tacky tape, tubes, peelply, and Flowmesh drainage mesh.
Català
Español
Português PT
