INFUSION INPUT MESH 2X7,5CM (YELLOW) 1 ML

Removable glass / carbon fiber sealant. It does not affect the mechanical properties of the infused piece

Basic consumables set to make your first resin infusion or a small project or repair. materials for 1m2

Low density polyethylene spiral, for resin distribution in an infusion system.

Jaw / Pliers to close the passage of resin or air in the resin infusion system for composites. Total hose tightness quickly and easily.

Perforated Polyethylene film that detaches from most resin systems - for infusion and vaccuum works

Sealing tape for the vacuum bag, 15 meter roll, ideal for resin infusion, vacuum compaction and sealing all joints, from the bag to the pump, through the resin trap.

Flowmesh is a perfect drain mesh for learning, thanks to its flexibility and ease of application. It comes with black weft threads that indicate the optimal resin flow direction. Thanks to its great flexibility, it is the most recommended mesh for small surfaces with complicated, angular areas.

Suitable for small vacuum systems, it saves resin by having a smaller inside diameter.

The easiest and most economical solution to have an effective resin trap

SORIC SF-2 MM

Pyramid for infusion, for 12 mm hose To connect the distribution system with a resin inlet and outlet hose. Made of high density polyethylene.,

Vacuum bag for infusion or vacuum. 65 microns, blue, width 2 meters (folded in half)

10X12MM 60ºC infusion hose

Bag for infusion or vacuum. 50 microns, orange, 30cm width (tubular)._x000D_