English GB
Jesmonite AC100 is the ideal resin to bring your creativity to life. It is an alternative to polyester or polyurethane for all types of decorative pieces. Ideal for use with silicone moulds.
Take advantage of February's special price on 1.75 kg kits with a 20% discount.
Acrylic pigment for Jesmonite resin. Apply a maximum of 2% by weight. AC100 resin produces the most vivid colours as it has a higher acrylic resin content.
Pigments are sold by weight and each colour has a different density, so it may appear that some colours are only half full. This is particularly true of white, oxides and terracotta.
Jesmonite AC84 is a two-component water-based acrylic resin, ideal for creating stone-finished pieces from moulds. Its high resistance and detail fidelity allow for durable and realistic results, with a texture that simulates natural stone, but without the actual weight. It is easy to use, customisable with pigments and safe as it does not emit toxic vapours. Perfect for sculptors, designers and creators of artistic and decorative pieces.
Case containing all official pigments Jesmonite in 10 g presentations, for AC100, AC300 and AC84
Includes:
The first 100% biodegradable resin of plant origin! Resin based on linseed oil and a natural activator based on sugar beet molasses: an innovative, safe and sustainable way to create your own decorative, utilitarian and artistic objects. Reslin® is easy and creative to use, with no harmful substances! Your pieces will be ready in 60 minutes at a low temperature in a convection oven. These Reslin® sets contain enough material to create multiple Reslin® objects. They are ideal for both small and large projects. Create endless possibilities with Reslin®!
Neon-based mineral pigments. Perfect for use with Jesmonite AC100/AC200/AC300. You can unleash your creativity with truly striking colours (neon effect).
Please note: does not glow in the dark! No fluorescent pigments.
Very fine mineral powder in beautiful, bright pearlescent colours. Mix the mica powder with Reslin® to give your objects a shiny pearlescent effect.
Format: 9 g
Mix this glow-in-the-dark pigment with Reslin® and create your own glow-in-the-dark artwork. It provides a glow-in-the-dark effect when properly charged and used in a dark room.
Format: 10 g
Natural glitter made from mica slate grain, which does not contain plastic. You can sprinkle it into your mould or mix it with your Reslin® to add a beautiful shine to your creation.
15 g format
Reslin® Tint, highly pigmented, solvent-based and with excellent coverage. Add a few drops of Reslin® Ink to the Reslin® mixture to colour it. You will obtain very vivid colours with excellent coverage. Size: 20 ml.
Whatsapp
English GB
Filter By
Discover Jesmonite, the world's leading non-toxic resin that is replacing solvent-based systems thanks to its safety and versatility.
This water-based system is completely free of toxic substances, fire-resistant and very easy to use for silicone moulds and moulding.
As Jesmonite Store Barcelona, we offer you an official guarantee and specialised technical advice.
Professional epoxy resins for art, wood, jewellery, fibreglass and industrial applications. Discover transparent, fast, slow and technical epoxy resins, organised by use so you can easily choose the most suitable one for your project.
Silicone mould in the shape of a hexagonal tray, 10 cm wide.
Ideal for resin reproductions of all kinds, especially epoxy and Jesmonite.
The QCC colour system has 200 colours. It starts with a colourless base to which pigments are added to achieve the chosen colour.
The price of gelcoats varies depending on the pigments used to achieve each colour.
The colour must be chosen carefully. It is important to bear in mind that the colours displayed on a computer screen may differ from the colour of the product.
Finer fibre for first coat or gelcoat reinforcement. Low resin consumption, very useful for reaching all corners. Also suitable for use with Jesmonite resin.
Polyester resin for laminates and fibreglass laminating. Low styrene emission for less irritating odours, good adhesion and ease of use. For all types of parts and general use.
AC300 is the solution for casting and moulding acrylic resin in moulds to obtain solid pieces at a lower cost than AC100. You can cast pieces of any size.
AC200 is anJesmonitee resin solution for obtaining a soft compound that can be carved, milled or machined. Ideal for models and prototypes for sculptors and designers.
Jesmonite AC100 is the ideal resin to bring your creativity to life. It is an alternative to polyester or polyurethane for all types of decorative pieces. Ideal for use with silicone moulds.
Take advantage of February's special price on 1.75 kg kits with a 20% discount.
Elasticity and feel. Format: Box of 100 units. Natural colour.
Polyester gelcoat, for brush or roller application. Isophthalic base. Viscosity suitable for all types of moulds and resin parts. Select the format and colour.
AC730 Flex Metal is the best solution for achieving a metallic effect on parts made from silicone moulds with Jesmonite resin. Achieve the look and feel of metal. An alternative to copper, bronze, silver or brass casting. Select the finish and format you need.
Vacuum pump for composites 42L/MIN 15 microns. High-performance mini vacuum pump. Maximum vacuum of 15 microns with a capacity of 42 litres per minute, ideal for small and medium-sized parts, up to 2m².
Metal roller with parallel grooves, for deaerating composite work, applying polyester resin and fibreglass or carbon/epoxy
Metal roller for manual application of fibreglass (SPECIAL CORNERS), allows you to easily remove air bubbles that may remain between layers, as well as apply more pressure and remove excess resin.
Odourless modelling clay suitable for any application. 1 kg format.
Important note: These modelling clays never dry out, thanks to their high wax and oil content.
TEFLON TAPE 12MX12MMX0.075MM (UD) sealing gasket for sealing all vacuum connections (price per unit)
TR 104 premium high-temperature wax is a high-production paste formulated to work in temperature-curing processes.
100 g/m² MAT fibreglass in 50-metre rolls, ideal for lamination, reinforcement and repair with polyester, vinyl ester and epoxy resins. Easy to handle, excellent adaptability to moulds and perfect for marine, automotive, construction and professional DIY applications.
3M™ SecureFit™ 400 Series safety spectacles offer a lightweight design with frameless polycarbonate lenses, 3M™ Pressure Diffusion Temple (PDT) technology, wide flexible temples, and soft adjustable nose pads.
Català
Español
Português PT
