English GB
Jesmonite AC100 is the ideal resin to give life to your creativity. It is an alternative to polyester or polyurethane for all kinds of decorative pieces. Ideal with silicone molds.
Acrylic pigment for Jesmonite resin. It is applied to a maximum of 2% by weight. With the AC100 resin the most vivid colors are obtained by having a higher acrylic resin content.
Pigments are sold by weight and each color has a different density, so for some colors it may appear that the bottle is only half full. Especially white, oxides and terracotta.
Jesmonite AC84 is a two-component, water-based acrylic resin, perfect for creating stone-like pieces from molds. Known for its high durability and precise detail reproduction, it offers a realistic stone finish without the heavy weight. Easy to use, customizable with pigments, and safe, as it emits no toxic fumes. Ideal for sculptors, designers, and creators of artistic and decorative pieces.
Case with all the official Jesmonite pigments in 10gr presentation, for AC100, AC300 and AC84
includes:
The first 100% biodegradable plant-based resin! Linseed oil-based resin and a natural activator based on sugar beet molasses: an innovative, safe, and sustainable way to create your own decorative, utilitarian, and artistic objects. Using Reslin® is simple and creative, without harmful substances! Your pieces will be ready in 60 minutes at a low temperature in the convection oven. These Reslin® sets contain enough material to create multiple Reslin® objects. They are ideal for both small and big projects. Create endless possibilities with Reslin®!
Mineral pigments with neon-colored base. Perfect for use with Jesmonite AC100/AC200/AC300. You can give free rein to your creativity with really bright colors (neon effect).
Please note: does not light up in the dark! No fluorescent pigments.
Mix this glow in the dark pigment with Reslin® and create your own glow in the dark artwork. Gives a glow in the dark effect when properly charged and used in a very dark room.
Natural glitter made from mica slate grit, which contains no plastic. You can sprinkle it into your mold or mix it through your Reslin® to add a beautiful shine to your creation.
Size 15 GR
Reslin® Tint is a highly pigmented, solvent-based, high-coverage ink. Add a few drops of Reslin® Tint to the Reslin® mixture to color it. You'll get vibrant, high-coverage colors. vol 20ml
Whatsapp
English GB
150gr / m2 absorption blanket
24/48 h Shipping
Secure payment
Easy returns
150gr / m2 absorption blanket
Vacuum bag for infusion or vacuum. 65 microns, blue, width 2 meters (folded in half)
Perforated Polyethylene film that detaches from most resin systems - for infusion and vaccuum works
Bag for infusion or vacuum. 50 microns, orange, 30cm width (tubular)._x000D_
Apply the Peel ply to the entire surface you want to separate from the fiberglass / carbon and other consumables.
Sealing tape for the vacuum bag, 15 meter roll, ideal for resin infusion, vacuum compaction and sealing all joints, from the bag to the pump, through the resin trap.
Transparent epoxy for fiberglass. Its medium viscosity and adherence is perfect to manufacture and repair of laminates. It has very good UV stability
Standard epoxy resin for laminates with fiberglass, carbon fiber, coating of portrex (expanded polystyrene). Thanks to its medium viscosity and fast drying it is widely used for all types of repairs, molds and final piece.
Perforated Polyethylene film that detaches from most resin systems - for infusion and vaccuum works
Jaw / Pliers to close the passage of resin or air in the resin infusion system for composites. Total hose tightness quickly and easily.
Suitable for small vacuum systems, it saves resin by having a smaller inside diameter.
Sealing tape for the vacuum bag, 15 meter roll, ideal for resin infusion, vacuum compaction and sealing all joints, from the bag to the pump, through the resin trap.
Bag for infusion or vacuum. 50 microns, orange, 30cm width (tubular)._x000D_
Apply the Peel ply to the entire surface you want to separate from the fiberglass / carbon and other consumables.
Low density polyethylene spiral, for resin distribution in an infusion system.
Vacuum bag for infusion or vacuum. 65 microns, blue, width 2 meters (folded in half)
Resin indicated for uses in which adhesion to expanded polystyrene "porex" / "white cork" is required as it does not attack or undo it. Ideal for scenographies, sets and labels.
Liquid for making a non-stick film between the mold and the reproductions. Ideal as a complement to the mold wax.
200gr / m2 twill 3K carbon fiber fabric
Structural filler of cut fiberglass chopped strands. To reinforce resins of polyester, epoxy and acrylic resin Jesmonite.
Polyester Gelcoat, for application Brush or roller. Isophthalic Base Viscosity appropriate for all types of molds and resin parts. Select the format and color.
210 gr / m2 flat fabric Format: 1 ML (width 1000mm) ideal for work with polyester resin or epoxy resin
Release agent to remove your polyester, jesmonite or epoxy parts in an easy way
150gr / m2 absorption blanket
Català
Español
