Structural filler of cut fiberglass chopped strands. To reinforce resins of polyester, epoxy and acrylic resin Jesmonite.
Legal
Shipping
Safe Payment
Structural filler of cut fiberglass chopped. To reinforce resins of polyester, epoxy and acrylic resin Jesmonite.
Structural filler of cut fiberglass chopped strands. To reinforce resins of polyester, epoxy and acrylic resin Jesmonite.
Standard epoxy resin for laminates with fiberglass, carbon fiber, coating of portrex (expanded polystyrene). Thanks to its medium viscosity and fast drying it is widely used for all types of repairs, molds and final piece.
AC300 is the solution for castings and castings of acrylic resin in mold, to obtain solid pieces with a lower cost than AC100. You can do casting of any size.
Polyester resin for laminates and laminated with fiberglass. Low emission of styrene for less irritating odors, good adhesion and comfort of use. For all types of parts and general use.
Polyester resin for casting of any size, without pre-accelerating. Cobalt Octoate and MEK must be added depending on the size of the casting.
Medium weight. versatile for molds and repairs of all kinds. The most common fiber for polyester resin.
Thinner fiber for first layer or reinforced gelcoats. Low resin consumption, very useful to reach every corner. It is also suitable for use with Jesmonite resin.
Fine weight, ideal for parts with many corners or corners that are difficult to adapt. Valid for polyester or epoxy.
Thick weight. For repairs that require thickness, or a large number of layers. It can also be combined with finer weights or in some cases with 500gr Roving for maximum strength. Valid for polyester or epoxy
