English GB
Jesmonite AC100 is the ideal resin to give life to your creativity. It is an alternative to polyester or polyurethane for all kinds of decorative pieces. Ideal with silicone molds.
Acrylic pigment for Jesmonite resin. It is applied to a maximum of 2% by weight. With the AC100 resin the most vivid colors are obtained by having a higher acrylic resin content.
Pigments are sold by weight and each color has a different density, so for some colors it may appear that the bottle is only half full. Especially white, oxides and terracotta.
Jesmonite AC84 is a two-component, water-based acrylic resin, perfect for creating stone-like pieces from molds. Known for its high durability and precise detail reproduction, it offers a realistic stone finish without the heavy weight. Easy to use, customizable with pigments, and safe, as it emits no toxic fumes. Ideal for sculptors, designers, and creators of artistic and decorative pieces.
Case with all the official Jesmonite pigments in 10gr presentation, for AC100, AC300 and AC84
includes:
The first 100% biodegradable plant-based resin! Linseed oil-based resin and a natural activator based on sugar beet molasses: an innovative, safe, and sustainable way to create your own decorative, utilitarian, and artistic objects. Using Reslin® is simple and creative, without harmful substances! Your pieces will be ready in 60 minutes at a low temperature in the convection oven. These Reslin® sets contain enough material to create multiple Reslin® objects. They are ideal for both small and big projects. Create endless possibilities with Reslin®!
Mineral pigments with neon-colored base. Perfect for use with Jesmonite AC100/AC200/AC300. You can give free rein to your creativity with really bright colors (neon effect).
Please note: does not light up in the dark! No fluorescent pigments.
Mix this glow in the dark pigment with Reslin® and create your own glow in the dark artwork. Gives a glow in the dark effect when properly charged and used in a very dark room.
Natural glitter made from mica slate grit, which contains no plastic. You can sprinkle it into your mold or mix it through your Reslin® to add a beautiful shine to your creation.
Size 15 GR
Reslin® Tint is a highly pigmented, solvent-based, high-coverage ink. Add a few drops of Reslin® Tint to the Reslin® mixture to color it. You'll get vibrant, high-coverage colors. vol 20ml
Whatsapp
English GB
Buy the Liquid of the Jesmonite AC7300 stone resin separately, in the format you need, either because you have missed it or because you make a different mixture than the recommended one to achieve different results.
24/48 h Shipping
Secure payment
Easy returns
Buy the Liquid of the Jesmonite AC7300 stone resin separately, in the format you need, either because you have missed it or because you make a different mixture than the recommended one to achieve different results.
Mixing blades for acrylic resins 65 / 35 mm. Thanks to its design, prevents the formation of bubbles and achieve a homogeneous mixture in a few seconds. It adapts easily to any standard drill.
Buy the base of the Jesmonite AC730 stone resin separately, in the format you need, either because you have missed it or because you make a different mixture than recommended to achieve different results.
Retardant for the Jesmonite AC730 and AC730 FLEX resin. Recommended ratio of 2 to 8 grs per kg of mixture.
Acrylic pigment for Jesmonite resin. It is applied to a maximum of 2% by weight. With the AC100 resin the most vivid colors are obtained by having a higher acrylic resin content.
Pigments are sold by weight and each color has a different density, so for some colors it may appear that the bottle is only half full. Especially white, oxides and terracotta.
The specific fiberglass for Jesmonite AC100 and AC730 resins. This type of glass reinforcement has been custom designed for use with Jesmonite. Very easy to adapt and work. Flame retardant
Silicone stick for mixing all types of resins. Very easy to clean and reuse to avoid residue.
Jesmonite AC84 is a two-component, water-based acrylic resin, perfect for creating stone-like pieces from molds. Known for its high durability and precise detail reproduction, it offers a realistic stone finish without the heavy weight. Easy to use, customizable with pigments, and safe, as it emits no toxic fumes. Ideal for sculptors, designers, and creators of artistic and decorative pieces.
60x40cm silicone mat, ideal for working with any resin and easy to clean.
Acid Etch is used to expose the fine decorative aggregate in Jesmonite AC730 materials. Removes the cement rich film from the surface
Case with all the official Jesmonite pigments in 10gr presentation, for AC100, AC300 and AC84
includes:
The vibrating platform is a great help to remove bubbles in the moulds, achieve a homogeneous mixture and improve the result of all your pieces with Jesmonite.
Buy the base of the Jesmonite AC730 stone resin separately, in the format you need, either because you have missed it or because you make a different mixture than recommended to achieve different results.
155mm long wooden sticks for mixing all types of resins. Pack of 25 units
Powerful and environmentally friendly detergent. Safe for cleaning all types of molds. Removes residues of JESMONITE, pigments, glitters, metallic powders, from the mold.
AC730 is the ideal resin for fiberglass reinforced decorative moldings. Ornaments and all kinds of sculptures. It is a suitable outdoor material. Available in a wide range of stone finishes. It can be used for small castings although its best performance is in laminated with fiberglass.
Case with 10 official Jesmonite pigments in 50gr presentation, for AC100, AC300 and AC84
includes:
1 x 50g Black
1 x 50g White
1 x 50g Bright Yellow
1 x 50g Oxide Yellow
1 x 50g Terracotta
1 x 50g Coade (coffee)
1 x 50g Green
1 x 50g Blue
1 x 50g Bright Red
1 x 50g Oxide Red
Retardant for the Jesmonite AC730 and AC730 FLEX resin. Recommended ratio of 2 to 8 grs per kg of mixture.
Resin application kit, either polyester, epoxy or jesmonite that includes:
Mixing blades for acrylic resins 65 / 35 mm. Thanks to its design, prevents the formation of bubbles and achieve a homogeneous mixture in a few seconds. It adapts easily to any standard drill.
Mineral pigments with neon-colored base. Perfect for use with Jesmonite AC100/AC200/AC300. You can give free rein to your creativity with really bright colors (neon effect).
Please note: does not light up in the dark! No fluorescent pigments.
Acrylic pigment for Jesmonite resin. It is applied to a maximum of 2% by weight. With the AC100 resin the most vivid colors are obtained by having a higher acrylic resin content.
Pigments are sold by weight and each color has a different density, so for some colors it may appear that the bottle is only half full. Especially white, oxides and terracotta.
Buy the base of the Jesmonite AC730 stone resin separately, in the format you need, either because you have missed it or because you make a different mixture than recommended to achieve different results.
Release agent in spray bottle. Suitable for polyester, epoxy resins, PMMA and polyurethanes.
Buy the Liquid of the Jesmonite AC100 resin separately, in the format you need, either because you have missed it or because you make a different mixture than the recommended one to achieve different results.
Thixotropic thickener additive for resin references Jesmonite AC100, AC200, AC300. So you don't pick up. Save time and material. Recommended mixing ratio of 2 to 6 grams per kg of mixture.
AC730 Flex Metal is the best solution to obtain metal effect in pieces from silicone mold with Jesmonite resin. Get the effect and behavior of the metal. Alternative to cast copper, bronze, silver or brass. select the finish and format you need
Buy the Liquid of the Jesmonite AC7300 stone resin separately, in the format you need, either because you have missed it or because you make a different mixture than the recommended one to achieve different results.
Català
Español
