English GB
Jesmonite AC100 is the ideal resin to bring your creativity to life. It is an alternative to polyester or polyurethane for all types of decorative pieces. Ideal for use with silicone moulds.
Take advantage of February's special price on 1.75 kg kits with a 20% discount.
Acrylic pigment for Jesmonite resin. Apply a maximum of 2% by weight. AC100 resin produces the most vivid colours as it has a higher acrylic resin content.
Pigments are sold by weight and each colour has a different density, so it may appear that some colours are only half full. This is particularly true of white, oxides and terracotta.
Jesmonite AC84 is a two-component water-based acrylic resin, ideal for creating stone-finished pieces from moulds. Its high resistance and detail fidelity allow for durable and realistic results, with a texture that simulates natural stone, but without the actual weight. It is easy to use, customisable with pigments and safe as it does not emit toxic vapours. Perfect for sculptors, designers and creators of artistic and decorative pieces.
Case containing all official pigments Jesmonite in 10 g presentations, for AC100, AC300 and AC84
Includes:
The first 100% biodegradable resin of plant origin! Resin based on linseed oil and a natural activator based on sugar beet molasses: an innovative, safe and sustainable way to create your own decorative, utilitarian and artistic objects. Reslin® is easy and creative to use, with no harmful substances! Your pieces will be ready in 60 minutes at a low temperature in a convection oven. These Reslin® sets contain enough material to create multiple Reslin® objects. They are ideal for both small and large projects. Create endless possibilities with Reslin®!
Neon-based mineral pigments. Perfect for use with Jesmonite AC100/AC200/AC300. You can unleash your creativity with truly striking colours (neon effect).
Please note: does not glow in the dark! No fluorescent pigments.
Very fine mineral powder in beautiful, bright pearlescent colours. Mix the mica powder with Reslin® to give your objects a shiny pearlescent effect.
Format: 9 g
Mix this glow-in-the-dark pigment with Reslin® and create your own glow-in-the-dark artwork. It provides a glow-in-the-dark effect when properly charged and used in a dark room.
Format: 10 g
Natural glitter made from mica slate grain, which does not contain plastic. You can sprinkle it into your mould or mix it with your Reslin® to add a beautiful shine to your creation.
15 g format
Reslin® Tint, highly pigmented, solvent-based and with excellent coverage. Add a few drops of Reslin® Ink to the Reslin® mixture to colour it. You will obtain very vivid colours with excellent coverage. Size: 20 ml.
Whatsapp
English GB
The Jesmonite Sealer – Acrylic SEALER with satin finish is a water-based acrylic protective coating specially formulated for Jesmonite surfaces. It provides water resistance, stain protection, and an elegant satin finish that enhances the natural color of your pieces. Ideal for decorative objects, trays, pots, and handcrafted creations.
Shipping 24/48 h
Secure payment
Easy returns
The Acrylic SEALER Satin is the recommended sealer to protect Jesmonite AC100 & AC300 surfaces, providing a durable protective layer without altering the material’s aesthetics. Its water-based acrylic formula gently penetrates the surface, creating a barrier against moisture, splashes, and light dirt.
Perfect for artists and makers seeking a professional finish. The satin effect gives a subtle, elegant shine, balancing the material’s natural matte finish without a plastic look.
Main Benefits
Protection against water and moisture
Stain resistance
Even satin finish
Slightly enhances color and depth
Water-based, low odor formula
Easy application with brush, roller, or spray
Fast drying
Recommended Uses
Decorative trays
Candle holders
Indoor pots and objects
Jesmonite decorative surfaces
Artisan and design pieces
Application Instructions
Ensure the piece is completely dry and clean.
Apply a thin, even layer with a brush or roller.
Don't let it dry completely.
Apply a second coat if additional protection is required.
Jesmonite AC100 is the ideal resin to bring your creativity to life. It is an alternative to polyester or polyurethane for all types of decorative pieces. Ideal for use with silicone moulds.
Take advantage of special price on 1.75 kg kits with a 20% discount.
AC300 is the solution for casting and moulding acrylic resin in moulds to obtain solid pieces at a lower cost than AC100. You can cast pieces of any size.
Pack containing everything you need to start working with JESMONITE AC100:
JESMONITE, 2 silicone moulds and YELLOW, RED and BLUE pigments.
Thickening additive "Thixotropic" for resin referencesJesmonite, AC100, AC200, AC300. Prevents sagging. Saves time and material. Recommended mixing ratio of 2 to 6 grams per kilogram of mixture.
Acid for removing the surface layer of acrylic resin in applications with stone fillers. This achieves a finish with more filler particles visible.
60x40cm silicone mat, ideal for working with any resin, easy to clean.
155 mm long wooden sticks for mixing all types of resins. Pack of 25 units.
The vibrating platform is extremely helpful for removing bubbles from moulds, achieving a homogeneous mixture and improving the results of all your pieces with Jesmonite. You can also use it when making silicone moulds to ensure that the silicone reaches even the smallest corners.
Powerful and environmentally friendly detergent. Safe for cleaning all types of moulds. Removes JESMONITE residues, pigments, glitter and metallic powders from the mould.
Jesmonite spray varnish for parts. Gloss finish.
Easy to apply. 150 ml format.
Jesmonite spray varnish for parts. Matt finish
Easy to apply. 150 ml format
Extends working time with the retarder for resin referencesJesmonite, AC730, and AC730 FLEX. Recommended mixing ratio of 2 to 8 grams per kilogram of mixture.
Acrylic sealant with GLOSS finish for Jesmonite to protect parts made with JesThe Jesmonite Sealer – Acrylic GLOSS SEALER with glossy finish is a water-based acrylic sealer designed to protect and enhance Jesmonite surfaces. Provides water and stain resistance with an intense glossy finish that highlights colors and details. Ideal for trays, pots, decorative objects, and artistic creations.monite AC100, AC200 and AC300.
Metal filler for Jesmonite resins. Available in copper, bronze and brass. 99.9% purity for a spectacular finish.
Case containing all official pigments Jesmonite in 10 g presentations, for AC100, AC300 and AC84
Includes:
Purchase the Jesmonite AC730 resin base separately, in the format you need, either because you have run out or because you are making a different mixture than the one recommended to achieve different results.
Jesmonite AC100 is the ideal resin to bring your creativity to life. It is an alternative to polyester or polyurethane for all types of decorative pieces. Ideal for use with silicone moulds.
Take advantage of February's special price on 1.75 kg kits with a 20% discount.
Mixing blades for acrylic resins, 65 or 35 mm. Thanks to their design, they prevent the formation of bubbles and achieve a homogeneous mixture in a few seconds. They fit any standard drill.
The Jesmonite Sealer – Acrylic SEALER with satin finish is a water-based acrylic protective coating specially formulated for Jesmonite surfaces. It provides water resistance, stain protection, and an elegant satin finish that enhances the natural color of your pieces. Ideal for decorative objects, trays, pots, and handcrafted creations.
Català
Español
Português PT
