English GB
Jesmonite AC100 is the ideal resin to give life to your creativity. It is an alternative to polyester or polyurethane for all kinds of decorative pieces. Ideal with silicone molds.
Acrylic pigment for Jesmonite resin. It is applied to a maximum of 2% by weight. With the AC100 resin the most vivid colors are obtained by having a higher acrylic resin content.
Pigments are sold by weight and each color has a different density, so for some colors it may appear that the bottle is only half full. Especially white, oxides and terracotta.
Jesmonite AC84 is a two-component, water-based acrylic resin, perfect for creating stone-like pieces from molds. Known for its high durability and precise detail reproduction, it offers a realistic stone finish without the heavy weight. Easy to use, customizable with pigments, and safe, as it emits no toxic fumes. Ideal for sculptors, designers, and creators of artistic and decorative pieces.
Case with all the official Jesmonite pigments in 10gr presentation, for AC100, AC300 and AC84
includes:
The first 100% biodegradable plant-based resin! Linseed oil-based resin and a natural activator based on sugar beet molasses: an innovative, safe, and sustainable way to create your own decorative, utilitarian, and artistic objects. Using Reslin® is simple and creative, without harmful substances! Your pieces will be ready in 60 minutes at a low temperature in the convection oven. These Reslin® sets contain enough material to create multiple Reslin® objects. They are ideal for both small and big projects. Create endless possibilities with Reslin®!
Mineral pigments with neon-colored base. Perfect for use with Jesmonite AC100/AC200/AC300. You can give free rein to your creativity with really bright colors (neon effect).
Please note: does not light up in the dark! No fluorescent pigments.
Mix this glow in the dark pigment with Reslin® and create your own glow in the dark artwork. Gives a glow in the dark effect when properly charged and used in a very dark room.
Natural glitter made from mica slate grit, which contains no plastic. You can sprinkle it into your mold or mix it through your Reslin® to add a beautiful shine to your creation.
Size 15 GR
Reslin® Tint is a highly pigmented, solvent-based, high-coverage ink. Add a few drops of Reslin® Tint to the Reslin® mixture to color it. You'll get vibrant, high-coverage colors. vol 20ml
Whatsapp
English GB
Mixing blades for acrylic resins 65 / 35 mm. Thanks to its design, prevents the formation of bubbles and achieve a homogeneous mixture in a few seconds. It adapts easily to any standard drill.
24/48 h Shipping
Secure payment
Easy returns
Mixing blades for acrylic resins 65 / 35 mm. Thanks to its design, prevents the formation of bubbles and achieve a homogeneous mixture in a few seconds. It adapts easily to any standard drill.
AC730 Flex Metal is the best solution to obtain metal effect in pieces from silicone mold with Jesmonite resin. Get the effect and behavior of the metal. Alternative to cast copper, bronze, silver or brass. select the finish and format you need
Acrylic pigment for Jesmonite resin. It is applied to a maximum of 2% by weight. With the AC100 resin the most vivid colors are obtained by having a higher acrylic resin content.
Pigments are sold by weight and each color has a different density, so for some colors it may appear that the bottle is only half full. Especially white, oxides and terracotta.
Jesmonite AC100 is the ideal resin to give life to your creativity. It is an alternative to polyester or polyurethane for all kinds of decorative pieces. Ideal with silicone molds.
AC300 is the solution for castings and castings of acrylic resin in mold, to obtain solid pieces with a lower cost than AC100. You can do casting of any size.
AC730 is the ideal resin for fiberglass reinforced decorative moldings. Ornaments and all kinds of sculptures. It is a suitable outdoor material. Available in a wide range of stone finishes. It can be used for small castings although its best performance is in laminated with fiberglass.
Acrylic sealant for Jesmonite to protect parts made with Jesmonite AC100, AC200 and AC300.
Silicone stick for mixing all types of resins. Very easy to clean and reuse to avoid residue.
155mm long wooden sticks for mixing all types of resins. Pack of 25 units
Powerful and environmentally friendly detergent. Safe for cleaning all types of molds. Removes residues of JESMONITE, pigments, glitters, metallic powders, from the mold.
4Pack that includes everything you need to start working with JESMONITE AC100:
Jesmonite, 1 silicone mold, and pigments
Glitter chips are fine like sand, also a little coarser up to about 3mm and can be mixed excellently with Jesmonite or other resins. Glitter chips give your creation an elegant and attractive final result!
Perfect for use with JESMONITE AC100
Size 30gr
Acrylic sealant GLOSS for Jesmonite to protect parts made with Jesmonite AC100, AC200 and AC300.
Case with 10 official Jesmonite pigments in 50gr presentation, for AC100, AC300 and AC84
includes:
1 x 50g Black
1 x 50g White
1 x 50g Bright Yellow
1 x 50g Oxide Yellow
1 x 50g Terracotta
1 x 50g Coade (coffee)
1 x 50g Green
1 x 50g Blue
1 x 50g Bright Red
1 x 50g Oxide Red
Jesmonite AC84 is a two-component, water-based acrylic resin, perfect for creating stone-like pieces from molds. Known for its high durability and precise detail reproduction, it offers a realistic stone finish without the heavy weight. Easy to use, customizable with pigments, and safe, as it emits no toxic fumes. Ideal for sculptors, designers, and creators of artistic and decorative pieces.
Pack that includes everything you need to start working with JESMONITE AC100:
Jesmonite, 1 silicone mold, and pigments
60x40cm silicone mat, ideal for working with any resin and easy to clean.
Spray varnish for Jesmonite pieces. Matt finish.
Easy to apply. 150ml format
4Pack that includes everything you need to start working with JESMONITE AC100:
Jesmonite, 1 silicone mold, and pigments
4Pack that includes everything you need to start working with JESMONITE AC100:
Jesmonite, 1 silicone mold, and pigments
Case with all the official Jesmonite pigments in 10gr presentation, for AC100, AC300 and AC84
includes:
The silver flakes are so fine and soft and can be mixed excellently with Jesmonite or other resins. get an elegant and eye-catching final result!
Perfect for use with JESMONITE AC100
Format 5 gr
RTV (Room Temperature Vulcanization) Silicone Standard for all types of fast, flexible and non-stick molds.
_x000D_
NEW FORMULA, BETTER STRENGTH RESISTANCE, TO GET MORE COPIES FROM A MOLD
Abrasive nylon fiber wheel for sanding jesmonite metal surfaces. It can be used on flat and irregular interior surfaces. 6mm shank Compatible with most electric drills.
Acrylic sealant GLOSS for Jesmonite to protect parts made with Jesmonite AC100, AC200 and AC300.
Mineral pigments with neon-colored base. Perfect for use with Jesmonite AC100/AC200/AC300. You can give free rein to your creativity with really bright colors (neon effect).
Please note: does not light up in the dark! No fluorescent pigments.
Jesmonite AC84 is a two-component, water-based acrylic resin, perfect for creating stone-like pieces from molds. Known for its high durability and precise detail reproduction, it offers a realistic stone finish without the heavy weight. Easy to use, customizable with pigments, and safe, as it emits no toxic fumes. Ideal for sculptors, designers, and creators of artistic and decorative pieces.
155mm long wooden sticks for mixing all types of resins. Pack of 25 units
Pack that includes everything you need to start working with JESMONITE AC100:
Jesmonite AC100, 2 silicone molds & pigments BRIGHT YELLOW, BRIGHT RED and BLUE
Mixing blades for acrylic resins 65 / 35 mm. Thanks to its design, prevents the formation of bubbles and achieve a homogeneous mixture in a few seconds. It adapts easily to any standard drill.
Català
Español
