Silicone stick for mixing

Case with 10 official Jesmonite pigments in 50gr presentation, for AC100, AC300 and AC84

includes:

1 x 50g Black

1 x 50g White

1 x 50g Bright Yellow

1 x 50g Oxide Yellow

1 x 50g Terracotta

1 x 50g Coade (coffee)

1 x 50g Green

1 x 50g Blue

1 x 50g Bright Red

1 x 50g Oxide Red

The first 100% biodegradable plant-based resin! Linseed oil-based resin and a natural activator based on sugar beet molasses: an innovative, safe, and sustainable way to create your own decorative, utilitarian, and artistic objects. Using Reslin® is simple and creative, without harmful substances! Your pieces will be ready in 60 minutes at a low temperature in the convection oven. These Reslin® sets contain enough material to create multiple Reslin® objects. They are ideal for both small and big projects. Create endless possibilities with Reslin®!

155mm long wooden sticks for mixing all types of resins. Pack of 25 units

The vibrating platform is a great help to remove bubbles in the moulds, achieve a homogeneous mixture and improve the result of all your pieces with Jesmonite.

60x40cm silicone mat, ideal for working with any resin and easy to clean.

Jesmonite AC84 is a two-component, water-based acrylic resin, perfect for creating stone-like pieces from molds. Known for its high durability and precise detail reproduction, it offers a realistic stone finish without the heavy weight. Easy to use, customizable with pigments, and safe, as it emits no toxic fumes. Ideal for sculptors, designers, and creators of artistic and decorative pieces.

Mix this glow in the dark pigment with Reslin® and create your own glow in the dark artwork. Gives a glow in the dark effect when properly charged and used in a very dark room.

Activity at the JESMONITE Store Barcelona

Activity in the JESMONITE Store Barcelona

Natural glitter made from mica slate grit, which contains no plastic. You can sprinkle it into your mold or mix it through your Reslin® to add a beautiful shine to your creation.

Size 15 GR

Spray varnish for Jesmonite pieces. Matt finish.

Easy to apply. 150ml format

Fine weight, ideal for parts with many corners or corners that are difficult to adapt. Valid for polyester or epoxy.

Buy here the base of the Jesmonite AC100 resin separately, in the format you need, either because you have missed it or because you make a different mixture than recommended to achieve different results. Select the size according to your need

Thinner fiber for first layer or reinforced gelcoats. Low resin consumption, very useful to reach every corner. It is also suitable for use with Jesmonite resin.

Colored pigmented paste for polyester or epoxy resins. For opaque and sun resistant colors. Very stable color, does not vary during resin drying.

Acrylic pigment for Jesmonite resin. It is applied to a maximum of 2% by weight. With the AC100 resin the most vivid colors are obtained by having a higher acrylic resin content.

Pigments are sold by weight and each color has a different density, so for some colors it may appear that the bottle is only half full. Especially white, oxides and terracotta.

Polyester putty spatulas, 4 units, stainless steel

Round coaster  silicone mold with edge, diameter 8 cm

Ideal for resin reproductions of all kinds, especially epoxy and Jesmonite.

Mixing blades for acrylic resins 65 / 35 mm. Thanks to its design, prevents the formation of bubbles and achieve a homogeneous mixture in a few seconds. It adapts easily to any standard drill.