English GB
Jesmonite AC100 is the ideal resin to give life to your creativity. It is an alternative to polyester or polyurethane for all kinds of decorative pieces. Ideal with silicone molds.
Acrylic pigment for Jesmonite resin. It is applied to a maximum of 2% by weight. With the AC100 resin the most vivid colors are obtained by having a higher acrylic resin content.
Pigments are sold by weight and each color has a different density, so for some colors it may appear that the bottle is only half full. Especially white, oxides and terracotta.
Jesmonite AC84 is a two-component, water-based acrylic resin, perfect for creating stone-like pieces from molds. Known for its high durability and precise detail reproduction, it offers a realistic stone finish without the heavy weight. Easy to use, customizable with pigments, and safe, as it emits no toxic fumes. Ideal for sculptors, designers, and creators of artistic and decorative pieces.
Case with all the official Jesmonite pigments in 10gr presentation, for AC100, AC300 and AC84
includes:
The first 100% biodegradable plant-based resin! Linseed oil-based resin and a natural activator based on sugar beet molasses: an innovative, safe, and sustainable way to create your own decorative, utilitarian, and artistic objects. Using Reslin® is simple and creative, without harmful substances! Your pieces will be ready in 60 minutes at a low temperature in the convection oven. These Reslin® sets contain enough material to create multiple Reslin® objects. They are ideal for both small and big projects. Create endless possibilities with Reslin®!
Mineral pigments with neon-colored base. Perfect for use with Jesmonite AC100/AC200/AC300. You can give free rein to your creativity with really bright colors (neon effect).
Please note: does not light up in the dark! No fluorescent pigments.
Mix this glow in the dark pigment with Reslin® and create your own glow in the dark artwork. Gives a glow in the dark effect when properly charged and used in a very dark room.
Natural glitter made from mica slate grit, which contains no plastic. You can sprinkle it into your mold or mix it through your Reslin® to add a beautiful shine to your creation.
Size 15 GR
Reslin® Tint is a highly pigmented, solvent-based, high-coverage ink. Add a few drops of Reslin® Tint to the Reslin® mixture to color it. You'll get vibrant, high-coverage colors. vol 20ml
Whatsapp
English GB
AC300 is the solution for castings and castings of acrylic resin in mold, to obtain solid pieces with a lower cost than AC100. You can do casting of any size.
24/48 h Shipping
Secure payment
Easy returns
Jesmonite AC300 is a water-based acrylic resin specifically formulated for artists, designers, and makers looking for a high-quality yet accessible material. One of its standout features is its low viscosity, which makes it significantly easier to mix, pour, and achieve highly detailed results, even when working with intricate or delicate molds. The fluid consistency also helps reduce air bubbles and enhances surface smoothness.
Another key benefit of Jesmonite AC300 is its more affordable price point compared to other Jesmonite variants or similar composite materials. It delivers professional-grade performance while remaining budget-friendly—ideal for both small-scale creative work and larger production runs.
Because it’s solvent-free and low in VOCs, AC300 is also a more eco-conscious choice, aligning with the values of sustainable and responsible creation. It’s compatible with pigments, fillers, and reinforcements, offering plenty of creative flexibility.
Whether you're casting decorative objects, prototypes, or artistic pieces, Jesmonite AC300 gives you the perfect balance of ease, economy, and excellence. Discover why so many creators are making the switch to this versatile and cost-effective solution.
Mixing blades for acrylic resins 65 / 35 mm. Thanks to its design, prevents the formation of bubbles and achieve a homogeneous mixture in a few seconds. It adapts easily to any standard drill.
Acrylic pigment for Jesmonite resin. It is applied to a maximum of 2% by weight. With the AC100 resin the most vivid colors are obtained by having a higher acrylic resin content.
Pigments are sold by weight and each color has a different density, so for some colors it may appear that the bottle is only half full. Especially white, oxides and terracotta.
Jesmonite AC100 is the ideal resin to give life to your creativity. It is an alternative to polyester or polyurethane for all kinds of decorative pieces. Ideal with silicone molds.
10cm square coaster silicone mold
Ideal for resin reproductions of all kinds, especially epoxy and Jesmonite.
155mm long wooden sticks for mixing all types of resins. Pack of 25 units
Spray varnish for Jesmonite pieces. Matt finish.
Easy to apply. 150ml format
Case with 10 official Jesmonite pigments in 50gr presentation, for AC100, AC300 and AC84
includes:
1 x 50g Black
1 x 50g White
1 x 50g Bright Yellow
1 x 50g Oxide Yellow
1 x 50g Terracotta
1 x 50g Coade (coffee)
1 x 50g Green
1 x 50g Blue
1 x 50g Bright Red
1 x 50g Oxide Red
The silver flakes are so fine and soft and can be mixed excellently with Jesmonite or other resins. get an elegant and eye-catching final result!
Perfect for use with JESMONITE AC100
Format 5 gr
Powerful and environmentally friendly detergent. Safe for cleaning all types of molds. Removes residues of JESMONITE, pigments, glitters, metallic powders, from the mold.
155mm long wooden sticks for mixing all types of resins. Pack of 25 units
Mixing blades for acrylic resins 65 / 35 mm. Thanks to its design, prevents the formation of bubbles and achieve a homogeneous mixture in a few seconds. It adapts easily to any standard drill.
Acrylic sealant GLOSS for Jesmonite to protect parts made with Jesmonite AC100, AC200 and AC300.
Case with all the official Jesmonite pigments in 10gr presentation, for AC100, AC300 and AC84
includes:
Acrylic sealant for Jesmonite to protect parts made with Jesmonite AC100, AC200 and AC300.
Get more work time with the retarder for Jesmonite AC100, AC200, AC300 resin references. Recommended mixing ratio of 2 to 8 grams per kg of mixture.
Buy the Jesmonite AC300 resin liquid separately, in the format you need, either because you have missed it or because you make a different mixture than recommended to achieve different results.
The vibrating platform is a great help to remove bubbles in the moulds, achieve a homogeneous mixture and improve the result of all your pieces with Jesmonite.
60x40cm silicone mat, ideal for working with any resin and easy to clean.
Glitter chips are fine like sand, also a little coarser up to about 3mm and can be mixed excellently with Jesmonite or other resins. Glitter chips give your creation an elegant and attractive final result!
Perfect for use with JESMONITE AC100
Size 30gr
Spray varnish for Jesmonite pieces. Glossy finish.
Easy to apply. 150ml format
AC200 is a Jesmonite resin solution to obtain a soft compound that can be carved, milled or machined. Ideal for models and prototypes for sculptors and designers
Interchangeable filters, medium size, for intensive use and maximum safety. As the filters can be changed, it is the most durable mask. Other 3M brand filters can be used
includes 2 filters 3M 6075 - 3M filter for 6000 and 7000 series masks, for organic vapors (boiling point above 65°C) and formaldehyde.
- They are light, offer low resistance to breathing, weight well balanced on the face. Its bayonet-type connection system guarantees a safe and effective fit. -
Use: for solvents in general (MEK, toluene...). Also for formaldehyde.
Release agent by silicone oil spray, highly recommended to facilitate subsequent reproduction in silicone molds,
Acrylic sealant for Jesmonite to protect parts made with Jesmonite AC100, AC200 and AC300.
Innovative modeling paste and suitable for any application. Format 1 Kg.
Important note: These molding pastes never dry, thanks to their high wax and oil content.
Pure metal filler for Jesmonite resins. 99,9% of metal powder to achieve amazing real metal effects.
Vaseline paste to be used as a release agent between silicone and silicone, or to isolate clay or plaster in molds with other resins
Acrylic pigment for Jesmonite resin. It is applied to a maximum of 2% by weight. With the AC100 resin the most vivid colors are obtained by having a higher acrylic resin content.
Pigments are sold by weight and each color has a different density, so for some colors it may appear that the bottle is only half full. Especially white, oxides and terracotta.
AC300 is the solution for castings and castings of acrylic resin in mold, to obtain solid pieces with a lower cost than AC100. You can do casting of any size.
Català
Español
