AC730 RETARDER

Buy the Liquid of the Jesmonite AC7300 stone resin separately, in the format you need, either because you have missed it or because you make a different mixture than the recommended one to achieve different results.

Powerful and environmentally friendly detergent. Safe for cleaning all types of molds. Removes residues of JESMONITE, pigments, glitters, metallic powders, from the mold.

Buy the base of the Jesmonite AC730 stone resin separately, in the format you need, either because you have missed it or because you make a different mixture than recommended to achieve different results.

Case with all the official Jesmonite pigments in 10gr presentation, for AC100, AC300 and AC84

includes:

• 2 x 10g Black
• 2 x 10g White
• 1 x 10g Bright Yellow
• 1 x 10g Oxide Yellow
• 1 x 10g Orange
• 1 x 10g Terracotta
• 1 x 10g Coade (coffee)
• 1 x 10g Green
• 1 x 10g Blue
• 1 x 10g Purple
• 1 x 10g Pink
• 1 x 10g Bright Red
• 1 x 10g Oxide Red

Case with 10 official Jesmonite pigments in 50gr presentation, for AC100, AC300 and AC84

includes:

1 x 50g Black

1 x 50g White

1 x 50g Bright Yellow

1 x 50g Oxide Yellow

1 x 50g Terracotta

1 x 50g Coade (coffee)

1 x 50g Green

1 x 50g Blue

1 x 50g Bright Red

1 x 50g Oxide Red

155mm long wooden sticks for mixing all types of resins. Pack of 25 units

The vibrating platform is a great help to remove bubbles in the moulds, achieve a homogeneous mixture and improve the result of all your pieces with Jesmonite.

Jesmonite AC84 is a two-component, water-based acrylic resin, perfect for creating stone-like pieces from molds. Known for its high durability and precise detail reproduction, it offers a realistic stone finish without the heavy weight. Easy to use, customizable with pigments, and safe, as it emits no toxic fumes. Ideal for sculptors, designers, and creators of artistic and decorative pieces.

60x40cm silicone mat, ideal for working with any resin and easy to clean.

Resin application kit, either polyester, epoxy or jesmonite that includes:

AC730 is the ideal resin for fiberglass reinforced decorative moldings. Ornaments and all kinds of sculptures. It is a suitable outdoor material. Available in a wide range of stone finishes. It can be used for small castings although its best performance is in laminated with fiberglass.

Mixing blades for acrylic resins 65 / 35 mm. Thanks to its design, prevents the formation of bubbles and achieve a homogeneous mixture in a few seconds. It adapts easily to any standard drill.

Acid Etch is used to expose the fine decorative aggregate in Jesmonite AC730 materials. Removes the cement rich film from the surface

The specific fiberglass for Jesmonite AC100 and AC730 resins. This type of glass reinforcement has been custom designed for use with Jesmonite. Very easy to adapt and work. Flame retardant

Spray varnish for Jesmonite pieces. Glossy finish.

Easy to apply. 150ml format

Mixing blades for acrylic resins 65 / 35 mm. Thanks to its design, prevents the formation of bubbles and achieve a homogeneous mixture in a few seconds. It adapts easily to any standard drill.

Buy the Liquid of the Jesmonite AC7300 stone resin separately, in the format you need, either because you have missed it or because you make a different mixture than the recommended one to achieve different results.

Spray varnish for Jesmonite pieces. Matt finish.

Easy to apply. 150ml format

Buy the base of the Jesmonite AC730 stone resin separately, in the format you need, either because you have missed it or because you make a different mixture than recommended to achieve different results.

RTV (Room Temperature Vulcanization) Silicone Standard for all types of fast, flexible and non-stick molds.

_x000D_

NEW FORMULA, BETTER STRENGTH RESISTANCE, TO GET MORE COPIES FROM A MOLD

Pure metal filler for Jesmonite resins. 99,9% of metal powder to achieve amazing real metal effects.