English GB
Jesmonite AC100 is the ideal resin to bring your creativity to life. It is an alternative to polyester or polyurethane for all types of decorative pieces. Ideal for use with silicone moulds.
Acrylic pigment for Jesmonite resin. Apply a maximum of 2% by weight. AC100 resin produces the most vivid colours as it has a higher acrylic resin content.
Pigments are sold by weight and each colour has a different density, so it may appear that some colours are only half full. This is particularly true of white, oxides and terracotta.
Jesmonite AC84 is a two-component water-based acrylic resin, ideal for creating stone-finished pieces from moulds. Its high resistance and detail fidelity allow for durable and realistic results, with a texture that simulates natural stone, but without the actual weight. It is easy to use, customisable with pigments and safe as it does not emit toxic vapours. Perfect for sculptors, designers and creators of artistic and decorative pieces.
Case containing all official pigments Jesmonite in 10 g presentations, for AC100, AC300 and AC84
Includes:
The first 100% biodegradable resin of plant origin! Resin based on linseed oil and a natural activator based on sugar beet molasses: an innovative, safe and sustainable way to create your own decorative, utilitarian and artistic objects. Reslin® is easy and creative to use, with no harmful substances! Your pieces will be ready in 60 minutes at a low temperature in a convection oven. These Reslin® sets contain enough material to create multiple Reslin® objects. They are ideal for both small and large projects. Create endless possibilities with Reslin®!
Neon-based mineral pigments. Perfect for use with Jesmonite AC100/AC200/AC300. You can unleash your creativity with truly striking colours (neon effect).
Please note: does not glow in the dark! No fluorescent pigments.
Very fine mineral powder in beautiful, bright pearlescent colours. Mix the mica powder with Reslin® to give your objects a shiny pearlescent effect.
Format: 9 g
Mix this glow-in-the-dark pigment with Reslin® and create your own glow-in-the-dark artwork. It provides a glow-in-the-dark effect when properly charged and used in a dark room.
Format: 10 g
Natural glitter made from mica slate grain, which does not contain plastic. You can sprinkle it into your mould or mix it with your Reslin® to add a beautiful shine to your creation.
15 g format
Reslin® Tint, highly pigmented, solvent-based and with excellent coverage. Add a few drops of Reslin® Ink to the Reslin® mixture to colour it. You will obtain very vivid colours with excellent coverage. Size: 20 ml.
Whatsapp
English GB
Cobalt Octoate for polyester resin. Accelerator that controls curing time and reduces working time. Available in 20 g, 100 g and 1 kg formats.
Shipping 24/48 h
Secure payment
Easy returns
Cobalt Octoate is a solution used as an accelerator in polyester resin systems. Its main function is to modify curing time, allowing the reaction speed to be adjusted according to work requirements.
It is an essential additive in professional processes where control of resin polymerization speed is required.
It allows accelerating the reaction of polyester resin, reducing final hardening time.
When adding Cobalt Octoate, the handling time of the mixture is considerably reduced.
This product significantly increases the temperature reached during curing, therefore it must be used with control and experience.
The recommended proportion is 1 to 2 grams per kilogram of resin, depending on the desired curing speed and environmental conditions.
This product is available in 20 g, 100 g and 1 kg, adapting to both small applications and industrial or continuous professional use.
IMPORTANT: Do not mix directly with polyester resin catalysts (peroxides), as it may cause a severe exothermic reaction that can generate fire.
It must always be incorporated separately into the resin before adding the corresponding catalyst.
STORE SEPARATELY FROM CATALYSTS
Recommended for manufacturing polyester resin parts, laminates, composites and industrial applications where curing control is required.
Complete resin application kit (polyester, epoxy, Jesmonite) with PP cups, latex gloves, double brush and wooden mixing sticks.
3M 4251+ FFA1P2 R D reusable maintenance-free mask with integrated filters for organic vapours and particulates.
Polyester resin for castings of any size, without pre-acceleration. Cobalt octoate and MEK must be added depending on the size of the casting.
Resin suitable for uses requiring adhesion to expanded polystyrene "porex" / "white cork" as it does not attack or break it down. Ideal for scenery, sets and signs.
Interchangeable filters, medium size, for intensive use and maximum safety. As the filters can be changed, it is the most durable mask. Other filters from the brand 3M can be used.
Includes 2 3M 6075 filters - 3M filter for 6000 and 7000 series masks, for organic vapours (boiling point above 65°C) and formaldehyde.
- They are lightweight, offer low breathing resistance and are well balanced on the face. Their bayonet connection system ensures a secure and effective fit. -
Use: for solvents in general (MEK, toluene, etc.). Also for formaldehyde.
Styrene Monomer: high-quality solvent ideal for polyester resins and gelcoats.
This colorless aromatic liquid is used to reduce resin viscosity, ensuring smoother and more uniform application, and also for cleaning tools in composite processes.
More effective than common solvents such as acetone when working with polyester systems.
Calcium carbonate, mineral filler for polyester resins, increases volume and mechanical properties, reduces exotherm, and optimizes final cost.
Paraffined styrene with 5% paraffin content, ideal as an additive for unsaturated polyester resins. This product eliminates surface tackiness after curing, making sanding and finishing fiberglass parts easier.
It allows converting Gel-Coat into Top-Coat and is especially useful for lamination, repair and surfboard glassing. Recommended dosage is approximately 3% by weight of the resin before adding the catalyst.
Briebe tabletop scale up to 5 kg with 1 gram precision. Ideal for accurate dosing of epoxy, polyester, Jesmonite, pigments, catalysts, and hardeners. Batteries included.
Polyester resin, flexible, low reactivity and medium viscosity, for mixing with standard resin and flexibilising polyester resins.
Glass microspheres. Filler for making putty, filleting and reinforcing polyester and epoxy resins.
Polyester Resin Catalyst — essential curing initiator for unsaturated polyester resins and gelcoats. Designed to activate the polymerization process and ensure uniform and controlled hardening, this catalyst produces solid, durable, high-quality parts for mold-making, fiberglass laminates, and structural components.
Typical dosage (1.25%–2%) allows precise gel and working time control. Ideal for industrial, marine, automotive, and light construction applications.
Aerosil, also known as Cabosil, is a pyrogenic silica powder additive for thickening epoxy, polyester, and other resins. 350 g format.
SP CONSUMABLES KIT (ANCILLARY KIT)
Flowmesh Light infusion mesh (125 cm), flexible and easy to use, ideal for complex surfaces with guided resin flow direction.
Aerosil, also known as Cabosil, is a pyrogenic silica powder additive for thickening epoxy, polyester, and other resins. 350 g format.
Resin suitable for uses requiring adhesion to expanded polystyrene "porex" / "white cork" as it does not attack or break it down. Ideal for scenery, sets and signs.
Natural latex gloves, resistant and elastic for resin work, painting and general use. Available in different sizes. Box of 100 units.
Polyester Resin Catalyst — essential curing initiator for unsaturated polyester resins and gelcoats. Designed to activate the polymerization process and ensure uniform and controlled hardening, this catalyst produces solid, durable, high-quality parts for mold-making, fiberglass laminates, and structural components.
Typical dosage (1.25%–2%) allows precise gel and working time control. Ideal for industrial, marine, automotive, and light construction applications.
300 g/m² chopped strand fiberglass is a high-strength reinforcement material ideal for use with polyester, vinyl ester, and epoxy resins. Perfect for lamination, repair, and manufacturing in marine, automotive, and construction applications. Excellent conformability, easy wet-out, and uniform finish.
Cobalt Octoate for polyester resin. Accelerator that controls curing time and reduces working time. Available in 20 g, 100 g and 1 kg formats.
Català
Español
Português PT
