English GB
Jesmonite AC100 is the ideal resin to give life to your creativity. It is an alternative to polyester or polyurethane for all kinds of decorative pieces. Ideal with silicone molds.
Acrylic pigment for Jesmonite resin. It is applied to a maximum of 2% by weight. With the AC100 resin the most vivid colors are obtained by having a higher acrylic resin content.
Pigments are sold by weight and each color has a different density, so for some colors it may appear that the bottle is only half full. Especially white, oxides and terracotta.
Jesmonite AC84 is a two-component, water-based acrylic resin, perfect for creating stone-like pieces from molds. Known for its high durability and precise detail reproduction, it offers a realistic stone finish without the heavy weight. Easy to use, customizable with pigments, and safe, as it emits no toxic fumes. Ideal for sculptors, designers, and creators of artistic and decorative pieces.
Case with all the official Jesmonite pigments in 10gr presentation, for AC100, AC300 and AC84
includes:
The first 100% biodegradable plant-based resin! Linseed oil-based resin and a natural activator based on sugar beet molasses: an innovative, safe, and sustainable way to create your own decorative, utilitarian, and artistic objects. Using Reslin® is simple and creative, without harmful substances! Your pieces will be ready in 60 minutes at a low temperature in the convection oven. These Reslin® sets contain enough material to create multiple Reslin® objects. They are ideal for both small and big projects. Create endless possibilities with Reslin®!
Mineral pigments with neon-colored base. Perfect for use with Jesmonite AC100/AC200/AC300. You can give free rein to your creativity with really bright colors (neon effect).
Please note: does not light up in the dark! No fluorescent pigments.
Mix this glow in the dark pigment with Reslin® and create your own glow in the dark artwork. Gives a glow in the dark effect when properly charged and used in a very dark room.
Natural glitter made from mica slate grit, which contains no plastic. You can sprinkle it into your mold or mix it through your Reslin® to add a beautiful shine to your creation.
Size 15 GR
Reslin® Tint is a highly pigmented, solvent-based, high-coverage ink. Add a few drops of Reslin® Tint to the Reslin® mixture to color it. You'll get vibrant, high-coverage colors. vol 20ml
Whatsapp
English GB
Filter By
Jesmonite is a versatile range of water-based, solvent free composite materials ideally suited to the creation of decorative mouldings and glass reinforced laminates. These materials have a range of unique properties, which contribute to strength, durability, non-toxicity, and the ability to comply with many of the necessary test requirements of the construction industry, specifically those in regard to fire performance and impact resistance.
Since its invention in 1984, Jesmonite has become renowned as a world leader in water-based resin systems. As we become ever more aware of the environmental impacts and the effects on our health that arise from the continued use of solvent based resin systems Jesmonite offers the safe alternative
Jesmonite water-based resin systems. Limited only by your imagination.
Hexagonal silicone mould, 10 cm wide.
Ideal for resin reproductions of all kinds, especially epoxy and Jesmonite.
Thinner fiber for first layer or reinforced gelcoats. Low resin consumption, very useful to reach every corner. It is also suitable for use with Jesmonite resin.
Polyester resin for laminates and laminated with fiberglass. Low emission of styrene for less irritating odors, good adhesion and comfort of use. For all types of parts and general use.
AC300 is the solution for castings and castings of acrylic resin in mold, to obtain solid pieces with a lower cost than AC100. You can do casting of any size.
AC200 is a Jesmonite resin solution to obtain a soft compound that can be carved, milled or machined. Ideal for models and prototypes for sculptors and designers
Jesmonite AC100 is the ideal resin to give life to your creativity. It is an alternative to polyester or polyurethane for all kinds of decorative pieces. Ideal with silicone molds.
Polyester Gelcoat, for application Brush or roller. Isophthalic Base Viscosity appropriate for all types of molds and resin parts. Select the format and color.
AC730 Flex Metal is the best solution to obtain metal effect in pieces from silicone mold with Jesmonite resin. Get the effect and behavior of the metal. Alternative to cast copper, bronze, silver or brass. select the finish and format you need
Empty pump for composites 42L / MIN 15 micron. Mini high performance vacuum pump. Maximum vacuum of 15 micron with a capacity of 42 liters per minute, ideal for small and medium pieces, up to 2m2
Metal roller with parallel grooves, for deaerated work with composites, application of polyester resin and fiberglass or carbon / epoxy
Metal roller for fiberglass application manually (SPECIAL CORNERS), allows to easily extract air bubbles that can remain between layers as well as make more pressure and eliminate excess resin.
Innovative modeling paste and suitable for any application. Format 1 Kg.
Important note: These molding pastes never dry, thanks to their high wax and oil content.
Comfort and safety. Maximum adaptability. Self-filtering 3M mask (FFP1S), with activated carbon designed to eliminate the discomfort caused by low levels of gases and vapors present in some operations together with particulate pollutants._x000D_ They prevent irritation. Reliable, comfortable and light.
TEFLON TAPE 12MX12MMX0.075MM (UD) sealing gasket to seal all vacuum connections
Premium TR 104 high temperature wax is a high production paste formulated to work in temperature curing processes.
Oval silicone mold 17.5 cm long and 9 cm wide
Ideal for resin reproductions of all kinds, especially epoxy and Jesmonite.
Català
Español
