English GB
Jesmonite AC100 is the ideal resin to give life to your creativity. It is an alternative to polyester or polyurethane for all kinds of decorative pieces. Ideal with silicone molds.
Acrylic pigment for Jesmonite resin. It is applied to a maximum of 2% by weight. With the AC100 resin the most vivid colors are obtained by having a higher acrylic resin content.
Pigments are sold by weight and each color has a different density, so for some colors it may appear that the bottle is only half full. Especially white, oxides and terracotta.
Jesmonite AC84 is a two-component, water-based acrylic resin, perfect for creating stone-like pieces from molds. Known for its high durability and precise detail reproduction, it offers a realistic stone finish without the heavy weight. Easy to use, customizable with pigments, and safe, as it emits no toxic fumes. Ideal for sculptors, designers, and creators of artistic and decorative pieces.
Case with all the official Jesmonite pigments in 10gr presentation, for AC100, AC300 and AC84
includes:
The first 100% biodegradable plant-based resin! Linseed oil-based resin and a natural activator based on sugar beet molasses: an innovative, safe, and sustainable way to create your own decorative, utilitarian, and artistic objects. Using Reslin® is simple and creative, without harmful substances! Your pieces will be ready in 60 minutes at a low temperature in the convection oven. These Reslin® sets contain enough material to create multiple Reslin® objects. They are ideal for both small and big projects. Create endless possibilities with Reslin®!
Mineral pigments with neon-colored base. Perfect for use with Jesmonite AC100/AC200/AC300. You can give free rein to your creativity with really bright colors (neon effect).
Please note: does not light up in the dark! No fluorescent pigments.
Mix this glow in the dark pigment with Reslin® and create your own glow in the dark artwork. Gives a glow in the dark effect when properly charged and used in a very dark room.
Natural glitter made from mica slate grit, which contains no plastic. You can sprinkle it into your mold or mix it through your Reslin® to add a beautiful shine to your creation.
Size 15 GR
Reslin® Tint is a highly pigmented, solvent-based, high-coverage ink. Add a few drops of Reslin® Tint to the Reslin® mixture to color it. You'll get vibrant, high-coverage colors. vol 20ml
Whatsapp
English GB
Filter By
Jesmonite is a versatile range of water-based, solvent free composite materials ideally suited to the creation of decorative mouldings and glass reinforced laminates. These materials have a range of unique properties, which contribute to strength, durability, non-toxicity, and the ability to comply with many of the necessary test requirements of the construction industry, specifically those in regard to fire performance and impact resistance.
Since its invention in 1984, Jesmonite has become renowned as a world leader in water-based resin systems. As we become ever more aware of the environmental impacts and the effects on our health that arise from the continued use of solvent based resin systems Jesmonite offers the safe alternative
Jesmonite water-based resin systems. Limited only by your imagination.
Active filters
Release agent by silicone oil spray, highly recommended to facilitate subsequent reproduction in silicone molds,
Reslin® Tint is a highly pigmented, solvent-based, high-coverage ink. Add a few drops of Reslin® Tint to the Reslin® mixture to color it. You'll get vibrant, high-coverage colors. vol 20ml
Cactus silicone mold. The piece is 6.5cm high.
Ideal for resin reproductions of all kinds, especially epoxy and Jesmonite.
*The figure is not included.
Solution to modify the viscosity of RTV silicones. Especially recommended for SILTHIXO silicone. Save time and silicone.
Glass microspheres filler for the production of putties, filleting and reinforcement of polyester and epoxy resins.
Catalyst for polyester resins and gelcoats. Usual ratio 1.25 to 2%. Always consult the resin technical data sheet.
Silicone catalyst for RTV molds, with blue pigment or without as an indicator of homogeneous mixing w
Case with 10 official Jesmonite pigments in 50gr presentation, for AC100, AC300 and AC84
includes:
1 x 50g Black
1 x 50g White
1 x 50g Bright Yellow
1 x 50g Oxide Yellow
1 x 50g Terracotta
1 x 50g Coade (coffee)
1 x 50g Green
1 x 50g Blue
1 x 50g Bright Red
1 x 50g Oxide Red
Resin application kit, either polyester, epoxy or jesmonite that includes:
Alginate is a material for quick molds, with water and suitable for reproductions of body parts since it is not toxic and can be in direct contact with the skin.
Vaseline paste to be used as a release agent between silicone and silicone, or to isolate clay or plaster in molds with other resins
Concentrated color transparent pigment. It gives color to the piece and maintains transparency. UV resistant.
Usual filler for casting polyester resin. Increase the volume of the resin, gives mechanical properties. Reduce the exotherm of the resin and reduce the cost of the final piece.
Styrene monomer with 5% paraffin addition. To remove the mordant of polyester resins. Turn a Gel-Coat into a Top-Coat or to surfboard glaze.
Aerosil or Cabosil, are trademarks of the same product. It is an additive to increase the viscosity of epoxy resins, polyester and other fluids. 350 grs format. Its main component is "Pyrogenic Silica"
Medium weight. versatile for molds and repairs of all kinds. The most common fiber for polyester resin.
Colored pigmented paste for polyester or epoxy resins. For opaque and sun resistant colors. Very stable color, does not vary during resin drying.
weighing scale of 5 kg, precision 1 gram. Ideal for weighing and correctly dosing all resins.
Polyester putty spatulas, 4 units, stainless steel
Pure metal filler for Jesmonite resins. 99,9% of metal powder to achieve amazing real metal effects.
CONSUMABLES KIT SP (ANCILLARY KIT)
Structural filler of cut fiberglass chopped strands. To reinforce resins of polyester, epoxy and acrylic resin Jesmonite.
Flexible polyester resin, with low reactivity and medium viscosity, for blends with standard resin and flexible polyester resins.
Català
Español
