English GB
Jesmonite AC100 is the ideal resin to give life to your creativity. It is an alternative to polyester or polyurethane for all kinds of decorative pieces. Ideal with silicone molds.
Take advantage of the special February price on 1.75 kg kits with a 20% discount
Acrylic pigment for Jesmonite resin. It is applied to a maximum of 2% by weight. With the AC100 resin the most vivid colors are obtained by having a higher acrylic resin content.
Pigments are sold by weight and each color has a different density, so for some colors it may appear that the bottle is only half full. Especially white, oxides and terracotta.
Jesmonite AC84 is a two-component, water-based acrylic resin, perfect for creating stone-like pieces from molds. Known for its high durability and precise detail reproduction, it offers a realistic stone finish without the heavy weight. Easy to use, customizable with pigments, and safe, as it emits no toxic fumes. Ideal for sculptors, designers, and creators of artistic and decorative pieces.
Case with all the official Jesmonite pigments in 10gr presentation, for AC100, AC300 and AC84
includes:
The first 100% biodegradable plant-based resin! Linseed oil-based resin and a natural activator based on sugar beet molasses: an innovative, safe, and sustainable way to create your own decorative, utilitarian, and artistic objects. Using Reslin® is simple and creative, without harmful substances! Your pieces will be ready in 60 minutes at a low temperature in the convection oven. These Reslin® sets contain enough material to create multiple Reslin® objects. They are ideal for both small and big projects. Create endless possibilities with Reslin®!
Mineral pigments with neon-colored base. Perfect for use with Jesmonite AC100/AC200/AC300. You can give free rein to your creativity with really bright colors (neon effect).
Please note: does not light up in the dark! No fluorescent pigments.
Mix this glow in the dark pigment with Reslin® and create your own glow in the dark artwork. Gives a glow in the dark effect when properly charged and used in a very dark room.
Natural glitter made from mica slate grit, which contains no plastic. You can sprinkle it into your mold or mix it through your Reslin® to add a beautiful shine to your creation.
Size 15 GR
Reslin® Tint is a highly pigmented, solvent-based, high-coverage ink. Add a few drops of Reslin® Tint to the Reslin® mixture to color it. You'll get vibrant, high-coverage colors. vol 20ml
Whatsapp
English GB
absorbent blanket 150 g/m²
Shipping 24/48 h
Secure payment
Easy returns
Absorbent blanket 150 g/m² Width 152 cm Sold by the metre
Vacuum bag for infusion or vacuum sealing. 65 microns, blue, width 2 metres (folded in half).
Perforated polyethylene film that peels off most resin systems:
Infusion or vacuum bag. 50 microns, orange, width 50 cm (tubular).
Apply Peel ply to the entire surface you wish to separate from the fibreglass/carbon and other consumables.
Sealing tape for vacuum bags, 15-metre roll, ideal for resin infusion, vacuum compaction and sealing all joints, from the bag to the pump, including the resin trap.
Standard epoxy resin for laminates with fibreglass, carbon fibre, and polystyrene foam (expanded polystyrene) coating. Thanks to its medium viscosity and fast drying time, it is widely used for all types of repairs, moulds, and final pieces.
Sealing tape for vacuum bags, 15-metre roll, ideal for resin infusion, vacuum compaction and sealing all joints, from the bag to the pump, including the resin trap.
Vacuum bag for infusion or vacuum sealing. 65 microns, blue, width 2 metres (folded in half).
Apply Peel ply to the entire surface you wish to separate from the fibreglass/carbon and other consumables.
Perforated polyethylene film that peels off most resin systems:
Infusion or vacuum bag. 50 microns, orange, width 50 cm (tubular).
Low-density polyethylene coil for resin distribution in an infusion system.
Suitable for small vacuum systems, it saves resin by having a smaller internal diameter.
Clamp/pliers to close off the flow of resin or air in the resin infusion system for composites. Quick and easy total sealing of the hose.
Transparent epoxy resin for application with fibreglass or carbon fibre. Thanks to its medium viscosity and adhesion, it is widely used for manufacturing and repairing laminates. It has very good UV stability. Recommended for sports equipment, surfboards, or coatings for 3D-printed parts.
Polyester gelcoat, for brush or roller application. Isophthalic base. Viscosity suitable for all types of moulds and resin parts. Select the format and colour.
Silicone oil release agent, highly recommended for facilitating successive reproductions in silicone moulds, extending the life of the mould and making it easier to clean.
Sealing tape for vacuum bags, 15-metre roll, ideal for resin infusion, vacuum compaction and sealing all joints, from the bag to the pump, including the resin trap.
Set of basic consumables for making your first resin infusion or for a small project or repair. Materials for 1m2.
Box of 12 brushes with wooden handles for all types of work with polyester resins, acrylic resins and paints. Format: 12 units.
155 mm long wooden sticks for mixing all types of resins. Pack of 25 units.
absorbent blanket 150 g/m²
Català
Español
