English GB
Jesmonite AC100 is the ideal resin to bring your creativity to life. It is an alternative to polyester or polyurethane for all types of decorative pieces. Ideal for use with silicone moulds.
Take advantage of February's special price on 1.75 kg kits with a 20% discount.
Acrylic pigment for Jesmonite resin. Apply a maximum of 2% by weight. AC100 resin produces the most vivid colours as it has a higher acrylic resin content.
Pigments are sold by weight and each colour has a different density, so it may appear that some colours are only half full. This is particularly true of white, oxides and terracotta.
Jesmonite AC84 is a two-component water-based acrylic resin, ideal for creating stone-finished pieces from moulds. Its high resistance and detail fidelity allow for durable and realistic results, with a texture that simulates natural stone, but without the actual weight. It is easy to use, customisable with pigments and safe as it does not emit toxic vapours. Perfect for sculptors, designers and creators of artistic and decorative pieces.
Case containing all official pigments Jesmonite in 10 g presentations, for AC100, AC300 and AC84
Includes:
The first 100% biodegradable resin of plant origin! Resin based on linseed oil and a natural activator based on sugar beet molasses: an innovative, safe and sustainable way to create your own decorative, utilitarian and artistic objects. Reslin® is easy and creative to use, with no harmful substances! Your pieces will be ready in 60 minutes at a low temperature in a convection oven. These Reslin® sets contain enough material to create multiple Reslin® objects. They are ideal for both small and large projects. Create endless possibilities with Reslin®!
Neon-based mineral pigments. Perfect for use with Jesmonite AC100/AC200/AC300. You can unleash your creativity with truly striking colours (neon effect).
Please note: does not glow in the dark! No fluorescent pigments.
Very fine mineral powder in beautiful, bright pearlescent colours. Mix the mica powder with Reslin® to give your objects a shiny pearlescent effect.
Format: 9 g
Mix this glow-in-the-dark pigment with Reslin® and create your own glow-in-the-dark artwork. It provides a glow-in-the-dark effect when properly charged and used in a dark room.
Format: 10 g
Natural glitter made from mica slate grain, which does not contain plastic. You can sprinkle it into your mould or mix it with your Reslin® to add a beautiful shine to your creation.
15 g format
Reslin® Tint, highly pigmented, solvent-based and with excellent coverage. Add a few drops of Reslin® Ink to the Reslin® mixture to colour it. You will obtain very vivid colours with excellent coverage. Size: 20 ml.
Whatsapp
English GB
Filter By
Discover Jesmonite, the world's leading non-toxic resin that is replacing solvent-based systems thanks to its safety and versatility.
This water-based system is completely free of toxic substances, fire-resistant and very easy to use for silicone moulds and moulding.
As Jesmonite Store Barcelona, we offer you an official guarantee and specialised technical advice.
Professional epoxy resins for art, wood, jewellery, fibreglass and industrial applications. Discover transparent, fast, slow and technical epoxy resins, organised by use so you can easily choose the most suitable one for your project.
Active filters
Finer fibre for first coat or gelcoat reinforcement. Low resin consumption, very useful for reaching all corners. Also suitable for use with Jesmonite resin.
Polyester resin for laminates and fibreglass laminating. Low styrene emission for less irritating odours, good adhesion and ease of use. For all types of parts and general use.
100 g/m² MAT fibreglass in 50-metre rolls, ideal for lamination, reinforcement and repair with polyester, vinyl ester and epoxy resins. Easy to handle, excellent adaptability to moulds and perfect for marine, automotive, construction and professional DIY applications.
Transparent polyester resin for casting. High transparency. For encapsulation, occlusions, glass imitation and translucent decorative objects.
Vaseline paste for use as a release agent between silicone and silicone, or to insulate clay or plaster in moulds with other resins.
Fine weight, ideal for pieces with many nooks and crannies that are difficult to adapt. Suitable for polyester or epoxy.
Resin suitable for uses requiring adhesion to expanded polystyrene "porex" / "white cork" as it does not attack or break it down. Ideal for scenery, sets and signs.
Silicone stick for mixing all types of resins. Very easy to clean and reuse to avoid waste.
Polyester resin for castings of any size, without pre-acceleration. Cobalt octoate and MEK must be added depending on the size of the casting.
60x40cm silicone mat, ideal for working with any resin, easy to clean.
Thick weight. For repairs requiring thickness or a large number of layers. It can also be combined with thinner weights or, in some cases, with 500 g roving to obtain maximum strength. Suitable for polyester or epoxy.
Polyester filler, for fine detailing, mould rectification and repairing fibreglass laminates with resin. 330 g format.
Powerful and environmentally friendly detergent. Safe for cleaning all types of moulds. Removes JESMONITE residues, pigments, glitter and metallic powders from the mould.
Polyester filler in 2 or 1.5 kg format, for fine detailing, mould rectification and repairing fibreglass laminates with resin. Easy to sand. Format: 1.5 kg, 2 kg (includes catalyst).
Jesmonite spray varnish for parts. Gloss finish.
Easy to apply. 150 ml format.
80 g/m² flat fabric Format: 1 ML (width 1 m) ideal for working with polyester resin or epoxy resin
Jesmonite spray varnish for parts. Matt finish
Easy to apply. 150 ml format
Flat fabric, 130 g/m² Format: 1 ML (width 1000 mm) ideal for working with polyester resin or epoxy resin
Glass microspheres. Filler for making putty, filleting and reinforcing polyester and epoxy resins.
The vibrating platform is extremely helpful for removing bubbles from moulds, achieving a homogeneous mixture and improving the results of all your pieces with Jesmonite. You can also use it when making silicone moulds to ensure that the silicone reaches even the smallest corners.
Catalyst for polyester resins and gelcoats. Usual proportion 1.25 to 2%. Always consult the resin's technical data sheet.
Flat fabric weighing 163 g/m² Format: 1 ML (width 1000 mm) ideal for working with polyester resin or epoxy resin
TWILL or SARGA fabric, 165 g/m² Format: 1 ML (width 1000 mm), ideal for working with polyester resin or epoxy resin
Kit for applying resins, whether polyester, epoxy or Jesmonite
2 resin-resistant polypropylene (PP) cups
1 pair of size L latex gloves
1 double brush, size 15
2 wooden mixing sticks
Català
Español
Português PT
