English GB
Jesmonite AC100 is the ideal resin to give life to your creativity. It is an alternative to polyester or polyurethane for all kinds of decorative pieces. Ideal with silicone molds.
Acrylic pigment for Jesmonite resin. It is applied to a maximum of 2% by weight. With the AC100 resin the most vivid colors are obtained by having a higher acrylic resin content.
Pigments are sold by weight and each color has a different density, so for some colors it may appear that the bottle is only half full. Especially white, oxides and terracotta.
Jesmonite AC84 is a two-component, water-based acrylic resin, perfect for creating stone-like pieces from molds. Known for its high durability and precise detail reproduction, it offers a realistic stone finish without the heavy weight. Easy to use, customizable with pigments, and safe, as it emits no toxic fumes. Ideal for sculptors, designers, and creators of artistic and decorative pieces.
Case with all the official Jesmonite pigments in 10gr presentation, for AC100, AC300 and AC84
includes:
The first 100% biodegradable plant-based resin! Linseed oil-based resin and a natural activator based on sugar beet molasses: an innovative, safe, and sustainable way to create your own decorative, utilitarian, and artistic objects. Using Reslin® is simple and creative, without harmful substances! Your pieces will be ready in 60 minutes at a low temperature in the convection oven. These Reslin® sets contain enough material to create multiple Reslin® objects. They are ideal for both small and big projects. Create endless possibilities with Reslin®!
Mineral pigments with neon-colored base. Perfect for use with Jesmonite AC100/AC200/AC300. You can give free rein to your creativity with really bright colors (neon effect).
Please note: does not light up in the dark! No fluorescent pigments.
Mix this glow in the dark pigment with Reslin® and create your own glow in the dark artwork. Gives a glow in the dark effect when properly charged and used in a very dark room.
Natural glitter made from mica slate grit, which contains no plastic. You can sprinkle it into your mold or mix it through your Reslin® to add a beautiful shine to your creation.
Size 15 GR
Reslin® Tint is a highly pigmented, solvent-based, high-coverage ink. Add a few drops of Reslin® Tint to the Reslin® mixture to color it. You'll get vibrant, high-coverage colors. vol 20ml
Whatsapp
English GB
Filter By
Jesmonite is a versatile range of water-based, solvent free composite materials ideally suited to the creation of decorative mouldings and glass reinforced laminates. These materials have a range of unique properties, which contribute to strength, durability, non-toxicity, and the ability to comply with many of the necessary test requirements of the construction industry, specifically those in regard to fire performance and impact resistance.
Since its invention in 1984, Jesmonite has become renowned as a world leader in water-based resin systems. As we become ever more aware of the environmental impacts and the effects on our health that arise from the continued use of solvent based resin systems Jesmonite offers the safe alternative
Jesmonite water-based resin systems. Limited only by your imagination.
Active filters
Hexagonal silicone mould, 10 cm wide.
Ideal for resin reproductions of all kinds, especially epoxy and Jesmonite.
Polyester resin for laminates and laminated with fiberglass. Low emission of styrene for less irritating odors, good adhesion and comfort of use. For all types of parts and general use.
Oval silicone mold 17.5 cm long and 9 cm wide
Ideal for resin reproductions of all kinds, especially epoxy and Jesmonite.
Clear polyester resin for casting. Great transparency For encapsulation, occlusion, imitation glass and translucent decorative objects
10cm square coaster silicone mold
Ideal for resin reproductions of all kinds, especially epoxy and Jesmonite.
Vaseline paste to be used as a release agent between silicone and silicone, or to isolate clay or plaster in molds with other resins
Resin indicated for uses in which adhesion to expanded polystyrene "porex" / "white cork" is required as it does not attack or undo it. Ideal for scenographies, sets and labels.
8 cm diameter round silicone mold
Ideal for resin reproductions of all kinds, especially epoxy and Jesmonite.
Silicone stick for mixing all types of resins. Very easy to clean and reuse to avoid residue.
Polyester resin for casting of any size, without pre-accelerating. Cobalt Octoate and MEK must be added depending on the size of the casting.
60x40cm silicone mat, ideal for working with any resin and easy to clean.
Polyester putty, to refine details, rectify molds and repair fiberglass laminates with resin. 330 gr format
Powerful and environmentally friendly detergent. Safe for cleaning all types of molds. Removes residues of JESMONITE, pigments, glitters, metallic powders, from the mold.
10cm Edge Square Coaster Shape Silicone Mold
Ideal for resin reproductions of all kinds, especially epoxy and Jesmonite.
Polyester putty in 2 kg format, to refine details, rectify molds and repair fiberglass laminates with resin. Easily sandpaper Format 2 kg (includes catalyst)
Spray varnish for Jesmonite pieces. Glossy finish.
Easy to apply. 150ml format
Round coaster silicone mold with edge, diameter 8 cm
Ideal for resin reproductions of all kinds, especially epoxy and Jesmonite.
Spray varnish for Jesmonite pieces. Matt finish.
Easy to apply. 150ml format
Cactus silicone mold. The piece is 6.5cm high.
Ideal for resin reproductions of all kinds, especially epoxy and Jesmonite.
*The figure is not included.
Glass microspheres filler for the production of putties, filleting and reinforcement of polyester and epoxy resins.
The vibrating platform is a great help to remove bubbles in the moulds, achieve a homogeneous mixture and improve the result of all your pieces with Jesmonite.
Catalyst for polyester resins and gelcoats. Usual ratio 1.25 to 2%. Always consult the resin technical data sheet.
Resin application kit, either polyester, epoxy or jesmonite that includes:
Català
Español
