English GB
Jesmonite AC100 is the ideal resin to give life to your creativity. It is an alternative to polyester or polyurethane for all kinds of decorative pieces. Ideal with silicone molds.
Acrylic pigment for Jesmonite resin. It is applied to a maximum of 2% by weight. With the AC100 resin the most vivid colors are obtained by having a higher acrylic resin content.
Pigments are sold by weight and each color has a different density, so for some colors it may appear that the bottle is only half full. Especially white, oxides and terracotta.
Jesmonite AC84 is a two-component, water-based acrylic resin, perfect for creating stone-like pieces from molds. Known for its high durability and precise detail reproduction, it offers a realistic stone finish without the heavy weight. Easy to use, customizable with pigments, and safe, as it emits no toxic fumes. Ideal for sculptors, designers, and creators of artistic and decorative pieces.
Case with all the official Jesmonite pigments in 10gr presentation, for AC100, AC300 and AC84
includes:
The first 100% biodegradable plant-based resin! Linseed oil-based resin and a natural activator based on sugar beet molasses: an innovative, safe, and sustainable way to create your own decorative, utilitarian, and artistic objects. Using Reslin® is simple and creative, without harmful substances! Your pieces will be ready in 60 minutes at a low temperature in the convection oven. These Reslin® sets contain enough material to create multiple Reslin® objects. They are ideal for both small and big projects. Create endless possibilities with Reslin®!
Mineral pigments with neon-colored base. Perfect for use with Jesmonite AC100/AC200/AC300. You can give free rein to your creativity with really bright colors (neon effect).
Please note: does not light up in the dark! No fluorescent pigments.
Mix this glow in the dark pigment with Reslin® and create your own glow in the dark artwork. Gives a glow in the dark effect when properly charged and used in a very dark room.
Natural glitter made from mica slate grit, which contains no plastic. You can sprinkle it into your mold or mix it through your Reslin® to add a beautiful shine to your creation.
Size 15 GR
Reslin® Tint is a highly pigmented, solvent-based, high-coverage ink. Add a few drops of Reslin® Tint to the Reslin® mixture to color it. You'll get vibrant, high-coverage colors. vol 20ml
Whatsapp
English GB
Filter By
Jesmonite is a versatile range of water-based, solvent free composite materials ideally suited to the creation of decorative mouldings and glass reinforced laminates. These materials have a range of unique properties, which contribute to strength, durability, non-toxicity, and the ability to comply with many of the necessary test requirements of the construction industry, specifically those in regard to fire performance and impact resistance.
Since its invention in 1984, Jesmonite has become renowned as a world leader in water-based resin systems. As we become ever more aware of the environmental impacts and the effects on our health that arise from the continued use of solvent based resin systems Jesmonite offers the safe alternative
Jesmonite water-based resin systems. Limited only by your imagination.
Active filters
Thinner fiber for first layer or reinforced gelcoats. Low resin consumption, very useful to reach every corner. It is also suitable for use with Jesmonite resin.
RTV (Room Temperature Vulcanization) Silicone Standard for all types of fast, flexible and non-stick molds.
_x000D_
NEW FORMULA, BETTER STRENGTH RESISTANCE, TO GET MORE COPIES FROM A MOLD
Fine weight, ideal for parts with many corners or corners that are difficult to adapt. Valid for polyester or epoxy.
RTV (Room Temperature Vulcanization) silicone for low melting metal casting. Recommended for casting lead and tin or bismuth alloys. ShoreA60
Medium weight. versatile for molds and repairs of all kinds. The most common fiber for polyester resin.
Silicone RTV (Room Temperature Vulcanization) of high viscosity (thixotropic) special for large molds applied by layers. Requires THIX additive to control viscosity.
Thick weight. For repairs that require thickness, or a large number of layers. It can also be combined with finer weights or in some cases with 500gr Roving for maximum strength. Valid for polyester or epoxy
Addition Silicone (platinum), more durability over time and greater tear resistance. Recommended for many copies or prototyping. The best Resineco silicone
Structural filler of cut fiberglass chopped strands. To reinforce resins of polyester, epoxy and acrylic resin Jesmonite.
Silicone for all types of reproductions. ShoreA 40. Specially formulated for food applications.
Flat fabric of 80 gr / m2 Format: 1 ML (width 1M) ideal for work with polyester resin or epoxy resin
Release agent by silicone oil spray, highly recommended to facilitate subsequent reproduction in silicone molds,
Flat fabric of 130 gr / m2 Format: 1 ML (width 1000mm) ideal for work with polyester resin or epoxy resin
Solution to modify the viscosity of RTV silicones. Especially recommended for SILTHIXO silicone. Save time and silicone.
Flat fabric of 163 gr / m2 Format: 1 ML (width 1000mm) ideal for work with polyester resin or epoxy resin
Silicone catalyst for RTV molds, with blue pigment or without as an indicator of homogeneous mixing w
TWILL or SARGA fabric of 165 gr / m2 Format: 1 ML (width 1000mm) ideal for work with polyester resin or epoxy resin
210 gr / m2 flat fabric Format: 1 ML (width 1000mm) ideal for work with polyester resin or epoxy resin
Alginate is a material for quick molds, with water and suitable for reproductions of body parts since it is not toxic and can be in direct contact with the skin.
Vaseline paste to be used as a release agent between silicone and silicone, or to isolate clay or plaster in molds with other resins
Biaxial fiberglass fabric +/- 45º Format: 1 M2 (width 1250mm) ideal for works with polyester resin or epoxy resin
500gr / m2 Roving fiberglass fabric Format 1m2 (125x80cm) ideal for work with polyester resin or epoxy resin
TWILL or SARGA fabric of 290 gr / m2 Format: 1 ML (width 1000mm) ideal for work with polyester resin or epoxy resin
Català
Español
