English GB
Jesmonite AC100 is the ideal resin to give life to your creativity. It is an alternative to polyester or polyurethane for all kinds of decorative pieces. Ideal with silicone molds.
Acrylic pigment for Jesmonite resin. It is applied to a maximum of 2% by weight. With the AC100 resin the most vivid colors are obtained by having a higher acrylic resin content.
Pigments are sold by weight and each color has a different density, so for some colors it may appear that the bottle is only half full. Especially white, oxides and terracotta.
Jesmonite AC84 is a two-component, water-based acrylic resin, perfect for creating stone-like pieces from molds. Known for its high durability and precise detail reproduction, it offers a realistic stone finish without the heavy weight. Easy to use, customizable with pigments, and safe, as it emits no toxic fumes. Ideal for sculptors, designers, and creators of artistic and decorative pieces.
Case with all the official Jesmonite pigments in 10gr presentation, for AC100, AC300 and AC84
includes:
The first 100% biodegradable plant-based resin! Linseed oil-based resin and a natural activator based on sugar beet molasses: an innovative, safe, and sustainable way to create your own decorative, utilitarian, and artistic objects. Using Reslin® is simple and creative, without harmful substances! Your pieces will be ready in 60 minutes at a low temperature in the convection oven. These Reslin® sets contain enough material to create multiple Reslin® objects. They are ideal for both small and big projects. Create endless possibilities with Reslin®!
Mineral pigments with neon-colored base. Perfect for use with Jesmonite AC100/AC200/AC300. You can give free rein to your creativity with really bright colors (neon effect).
Please note: does not light up in the dark! No fluorescent pigments.
Mix this glow in the dark pigment with Reslin® and create your own glow in the dark artwork. Gives a glow in the dark effect when properly charged and used in a very dark room.
Natural glitter made from mica slate grit, which contains no plastic. You can sprinkle it into your mold or mix it through your Reslin® to add a beautiful shine to your creation.
Size 15 GR
Reslin® Tint is a highly pigmented, solvent-based, high-coverage ink. Add a few drops of Reslin® Tint to the Reslin® mixture to color it. You'll get vibrant, high-coverage colors. vol 20ml
Whatsapp
English GB
Get more work time with the retarder for Jesmonite AC100, AC200, AC300 resin references. Recommended mixing ratio of 2 to 8 grams per kg of mixture.
24/48 h Shipping
Secure payment
Easy returns
Get more work time with the retarder for Jesmonite AC100, AC200, AC300 resin references. Recommended mixing ratio of 2 to 8 grams per kg of mixture.
Resin application kit, either polyester, epoxy or jesmonite that includes:
Jesmonite AC100 is the ideal resin to give life to your creativity. It is an alternative to polyester or polyurethane for all kinds of decorative pieces. Ideal with silicone molds.
AC200 is a Jesmonite resin solution to obtain a soft compound that can be carved, milled or machined. Ideal for models and prototypes for sculptors and designers
AC300 is the solution for castings and castings of acrylic resin in mold, to obtain solid pieces with a lower cost than AC100. You can do casting of any size.
Retardant for the Jesmonite AC730 and AC730 FLEX resin. Recommended ratio of 2 to 8 grs per kg of mixture.
Acid Etch is used to expose the fine decorative aggregate in Jesmonite AC730 materials. Removes the cement rich film from the surface
Thixotropic thickener additive for resin references Jesmonite AC100, AC200, AC300. So you don't pick up. Save time and material. Recommended mixing ratio of 2 to 6 grams per kg of mixture.
Powerful and environmentally friendly detergent. Safe for cleaning all types of molds. Removes residues of JESMONITE, pigments, glitters, metallic powders, from the mold.
60x40cm silicone mat, ideal for working with any resin and easy to clean.
Spray varnish for Jesmonite pieces. Glossy finish.
Easy to apply. 150ml format
155mm long wooden sticks for mixing all types of resins. Pack of 25 units
The vibrating platform is a great help to remove bubbles in the moulds, achieve a homogeneous mixture and improve the result of all your pieces with Jesmonite.
Acrylic sealant for Jesmonite to protect parts made with Jesmonite AC100, AC200 and AC300.
Acrylic sealant GLOSS for Jesmonite to protect parts made with Jesmonite AC100, AC200 and AC300.
Spray varnish for Jesmonite pieces. Matt finish.
Easy to apply. 150ml format
weighing scale of 5 kg, precision 1 gram. Ideal for weighing and correctly dosing all resins.
AC730 Flex Metal is the best solution to obtain metal effect in pieces from silicone mold with Jesmonite resin. Get the effect and behavior of the metal. Alternative to cast copper, bronze, silver or brass. select the finish and format you need
Buy the base of the Jesmonite AC730 stone resin separately, in the format you need, either because you have missed it or because you make a different mixture than recommended to achieve different results.
Retardant for the Jesmonite AC730 and AC730 FLEX resin. Recommended ratio of 2 to 8 grs per kg of mixture.
The specific fiberglass for Jesmonite AC100 and AC730 resins. This type of glass reinforcement has been custom designed for use with Jesmonite. Very easy to adapt and work. Flame retardant
Acrylic sealant for Jesmonite to protect parts made with Jesmonite AC100, AC200 and AC300.
Buy the Liquid of the Jesmonite AC100 resin separately, in the format you need, either because you have missed it or because you make a different mixture than the recommended one to achieve different results.
Get more work time with the retarder for Jesmonite AC100, AC200, AC300 resin references. Recommended mixing ratio of 2 to 8 grams per kg of mixture.
Català
Español
