TeamMayku FORMBOX

Metal filler for Jesmonite resins. Available in copper, bronze and brass. 99.9% purity for a spectacular finish.

Mixing blades for acrylic resins, 65 or 35 mm. Thanks to their design, they prevent the formation of bubbles and achieve a homogeneous mixture in a few seconds. They fit any standard drill.

Jesmonite AC100 is the ideal resin to bring your creativity to life. It is an alternative to polyester or polyurethane for all types of decorative pieces. Ideal for use with silicone moulds.

Take advantage of February's special price on 1.75 kg kits with a 20% discount.

Jesmonite spray varnish for parts. Matt finish

Easy to apply. 150 ml format

Nylon fibre abrasive wheel for sanding Jesmonite Metal surfaces. Can be used on flat and uneven interior surfaces. 6 mm shank. Compatible with most electric drills.

Structural load of chopped fibreglass strands. For reinforcing polyester, epoxy and acrylic resins Jesmonite.

Silicone stick for mixing all types of resins. Very easy to clean and reuse to avoid waste.

Fibreglass specifically designed for Jesmonite AC100 and AC730 resins. This type of glass reinforcement has been custom-designed for use with Jesmonite. Very easy to adapt and work with. Fireproof.

Acrylic sealant with GLOSS finish for Jesmonite to protect parts made with Jesmonite AC100, AC200 and AC300.

Extends working time with the retarder for resin referencesJesmonite, AC730, and AC730 FLEX. Recommended mixing ratio of 2 to 8 grams per kilogram of mixture.

Case with 10 officialJesmonitepigments in 50g packs, for AC100, AC300 and AC84

Includes: 

1 x 50 g Black 

1 x 50 g White

1 x 50 g Bright Yellow

1 x 50 g Rust Yellow

1 x 50 g Terracotta

1 x 50 g Coade (coffee)

1 x 50 g Green

1 x 50 g Blue

1 x 50 g Bright Red

1 x 50 g Rust Red

Pack containing everything you need to start working with JESMONITE AC100:

JESMONITE, 2 silicone moulds and YELLOW, RED and BLUE pigments.

AC730 is the ideal resin for fibreglass-reinforced decorative mouldings, ornaments and all types of sculptures. It is suitable for outdoor use and available in a wide range of stone finishes. It can be used for small castings, although it performs best in fibreglass laminates.

Jesmonite AC84 is a two-component water-based acrylic resin, ideal for creating stone-finished pieces from moulds. Its high resistance and detail fidelity allow for durable and realistic results, with a texture that simulates natural stone, but without the actual weight. It is easy to use, customisable with pigments and safe as it does not emit toxic vapours. Perfect for sculptors, designers and creators of artistic and decorative pieces.

Case containing all official pigments Jesmonite in 10 g presentations, for AC100, AC300 and AC84

Includes: 

• 2 x 10 g Black 
• 2 x 10 g White
• 1 x 10 g Bright Yellow
• 1 x 10 g Rust Yellow
• 1 x 10 g Orange
• 1 x 10 g Terracotta
• 1 x 10 g Coade (brown)
• 1 x 10 g Green
• 1 x 10 g Blue
• 1 x 10 g Lilac
• 1 x 10 g Pink
• 1 x 10 g Bright Red
• 1 x 10 g Rust Red

Thickening additive "Thixotropic" for resin referencesJesmonite, AC100, AC200, AC300. Prevents sagging. Saves time and material. Recommended mixing ratio of 2 to 6 grams per kilogram of mixture.