English GB
Jesmonite AC100 is the ideal resin to give life to your creativity. It is an alternative to polyester or polyurethane for all kinds of decorative pieces. Ideal with silicone molds.
Acrylic pigment for Jesmonite resin. It is applied to a maximum of 2% by weight. With the AC100 resin the most vivid colors are obtained by having a higher acrylic resin content.
Pigments are sold by weight and each color has a different density, so for some colors it may appear that the bottle is only half full. Especially white, oxides and terracotta.
Jesmonite AC84 is a two-component, water-based acrylic resin, perfect for creating stone-like pieces from molds. Known for its high durability and precise detail reproduction, it offers a realistic stone finish without the heavy weight. Easy to use, customizable with pigments, and safe, as it emits no toxic fumes. Ideal for sculptors, designers, and creators of artistic and decorative pieces.
Case with all the official Jesmonite pigments in 10gr presentation, for AC100, AC300 and AC84
includes:
The first 100% biodegradable plant-based resin! Linseed oil-based resin and a natural activator based on sugar beet molasses: an innovative, safe, and sustainable way to create your own decorative, utilitarian, and artistic objects. Using Reslin® is simple and creative, without harmful substances! Your pieces will be ready in 60 minutes at a low temperature in the convection oven. These Reslin® sets contain enough material to create multiple Reslin® objects. They are ideal for both small and big projects. Create endless possibilities with Reslin®!
Mineral pigments with neon-colored base. Perfect for use with Jesmonite AC100/AC200/AC300. You can give free rein to your creativity with really bright colors (neon effect).
Please note: does not light up in the dark! No fluorescent pigments.
Mix this glow in the dark pigment with Reslin® and create your own glow in the dark artwork. Gives a glow in the dark effect when properly charged and used in a very dark room.
Natural glitter made from mica slate grit, which contains no plastic. You can sprinkle it into your mold or mix it through your Reslin® to add a beautiful shine to your creation.
Size 15 GR
Reslin® Tint is a highly pigmented, solvent-based, high-coverage ink. Add a few drops of Reslin® Tint to the Reslin® mixture to color it. You'll get vibrant, high-coverage colors. vol 20ml
Whatsapp
English GB
Our own brand, selected products
Bag for infusion or vacuum. 50 microns, orange, 30cm width (tubular)._x000D_
Solution to modify the viscosity of RTV silicones. Especially recommended for SILTHIXO silicone. Save time and silicone.
Large vacuum gauge (63mm) to accurately measure the level of vacuum in the bag during infusion or vacuum compaction.
Flat fabric of 163 gr / m2 Format: 1 ML (width 1000mm) ideal for work with polyester resin or epoxy resin
Glass microspheres filler for the production of putties, filleting and reinforcement of polyester and epoxy resins.
mesh tube mesh Yb1 infusion input
Catalyst for polyester resins and gelcoats. Usual ratio 1.25 to 2%. Always consult the resin technical data sheet.
Silicone catalyst for RTV molds, with blue pigment or without as an indicator of homogeneous mixing w
Epoxy resin with Bio Mass 55% Replaces the consumption of mineral resources by plant resources
The key that allows to open and close the vacuum circuit in the infusion
TWILL or SARGA fabric of 165 gr / m2 Format: 1 ML (width 1000mm) ideal for work with polyester resin or epoxy resin
complex 1,5m x 100m_x000D_ _x000D_ the COMPLEX mesh integrates the drainage mesh, the perforated film and even the Peel Ply, and saves time, resin and effort in separating the consumables from the finished piece.
Colored pigmented paste for polyester or epoxy resins. For opaque and sun resistant colors. Very stable color, does not vary during resin drying.
210 gr / m2 flat fabric Format: 1 ML (width 1000mm) ideal for work with polyester resin or epoxy resin
Flowmesh is a perfect drain mesh for learning, thanks to its flexibility and ease of application. It comes with black weft threads that indicate the optimal resin flow direction. Thanks to its great flexibility, it is the most recommended mesh for small surfaces with complicated, angular areas.
Thixotropic thickener additive for resin references Jesmonite AC100, AC200, AC300. So you don't pick up. Save time and material. Recommended mixing ratio of 2 to 6 grams per kg of mixture.
Concentrated color transparent pigment. It gives color to the piece and maintains transparency. UV resistant.
Transparent epoxy for fiberglass. Its medium viscosity and adherence is perfect to manufacture and repair of laminates. It has very good UV stability
Biaxial fiberglass fabric +/- 45º Format: 1 M2 (width 1250mm) ideal for works with polyester resin or epoxy resin
Standard epoxy resin for laminates with fiberglass, carbon fiber, coating of portrex (expanded polystyrene). Thanks to its medium viscosity and fast drying it is widely used for all types of repairs, molds and final piece.
Under the Resineco brand, you can find a selection of polyester, epoxy, fiber resins ...
Català
Español
