English GB
Jesmonite AC100 is the ideal resin to give life to your creativity. It is an alternative to polyester or polyurethane for all kinds of decorative pieces. Ideal with silicone molds.
Take advantage of the special February price on 1.75 kg kits with a 20% discount
Acrylic pigment for Jesmonite resin. It is applied to a maximum of 2% by weight. With the AC100 resin the most vivid colors are obtained by having a higher acrylic resin content.
Pigments are sold by weight and each color has a different density, so for some colors it may appear that the bottle is only half full. Especially white, oxides and terracotta.
Jesmonite AC84 is a two-component, water-based acrylic resin, perfect for creating stone-like pieces from molds. Known for its high durability and precise detail reproduction, it offers a realistic stone finish without the heavy weight. Easy to use, customizable with pigments, and safe, as it emits no toxic fumes. Ideal for sculptors, designers, and creators of artistic and decorative pieces.
Case with all the official Jesmonite pigments in 10gr presentation, for AC100, AC300 and AC84
includes:
The first 100% biodegradable plant-based resin! Linseed oil-based resin and a natural activator based on sugar beet molasses: an innovative, safe, and sustainable way to create your own decorative, utilitarian, and artistic objects. Using Reslin® is simple and creative, without harmful substances! Your pieces will be ready in 60 minutes at a low temperature in the convection oven. These Reslin® sets contain enough material to create multiple Reslin® objects. They are ideal for both small and big projects. Create endless possibilities with Reslin®!
Mineral pigments with neon-colored base. Perfect for use with Jesmonite AC100/AC200/AC300. You can give free rein to your creativity with really bright colors (neon effect).
Please note: does not light up in the dark! No fluorescent pigments.
Mix this glow in the dark pigment with Reslin® and create your own glow in the dark artwork. Gives a glow in the dark effect when properly charged and used in a very dark room.
Natural glitter made from mica slate grit, which contains no plastic. You can sprinkle it into your mold or mix it through your Reslin® to add a beautiful shine to your creation.
Size 15 GR
Reslin® Tint is a highly pigmented, solvent-based, high-coverage ink. Add a few drops of Reslin® Tint to the Reslin® mixture to color it. You'll get vibrant, high-coverage colors. vol 20ml
Whatsapp
English GB
Transparent epoxy resin for application with fibreglass or carbon fibre. Thanks to its medium viscosity and adhesion, it is widely used for manufacturing and repairing laminates. It has very good UV stability. Recommended for sports equipment, surfboards, or coatings for 3D-printed parts.
Shipping 24/48 h
Secure payment
Easy returns
Transparent epoxy resin Surf for application with fibreglass. Thanks to its medium viscosity and adhesion, it is widely used for manufacturing and repairing laminates. It has very good UV stability.
Mixing ratio:
100:48 BY WEIGHT
200 g/m² fibreglass tape. Width: 5 cm. Sold by the linear metre. (continuous metres are cut from the same roll)
HEXCEL PLAIN fabric, 206 g/m² (6 OUNCES) Format: 1 ML (width 650 mm), ideal for working with polyester resin or epoxy resin.
80 g/m² flat fabric Format: 1 ML (width 1 m) ideal for working with polyester resin or epoxy resin
Styrene monomer with 5% paraffin added. For removing the bite from polyester resins. Converts a gel coat into a top coat or for glazing surfboards.
Silicone stick for mixing all types of resins. Very easy to clean and reuse to avoid waste.
Transparent epoxy resin for large castings, thicknesses up to 7 cm. Specially formulated for river tables, epoxy art with wood.
Transparent epoxy resin. Low viscosity and adhesion for jewellery, costume jewellery or resin art. Excellent UV stability. For thicknesses up to 5 mm.
155 mm long wooden sticks for mixing all types of resins. Pack of 25 units.
The silver flakes are so fine and soft and can be mixed excellently with Jesmonite or other resins. Achieve an elegant and striking end result!
Perfect for use with JESMONITE AC100
5g format
Glitter chips are as fine as sand, but also slightly thicker, up to about 3 mm, and can be mixed excellently with Jesmonite or other resins. Glitter chips give your creation an elegant and eye-catching finish!
Perfect for use with JESMONITE AC100
Format 30g
Mould release agent in aerosol can. Suitable for polyester, epoxy resins, PMMA and polyurethanes.
5 kg tabletop scale, 1 gram precision. Ideal for accurately weighing and measuring all resins.
Apply Peel ply to the entire surface you wish to separate from the fibreglass/carbon and other consumables.
Styrene monomer with 5% paraffin added. For removing the bite from polyester resins. Converts a gel coat into a top coat or for glazing surfboards.
Concentrated transparent colour pigment. Adds colour to the piece while maintaining transparency. UV resistant.
Transparent polyester resin for casting. High transparency. For encapsulation, occlusions, glass imitation and translucent decorative objects.
80 g/m² flat fabric Format: 1 ML (width 1 m) ideal for working with polyester resin or epoxy resin
Transparent epoxy resin. Low viscosity and adhesion for jewellery, costume jewellery or resin art. Excellent UV stability. For thicknesses up to 5 mm.
Transparent epoxy resin for application with fibreglass or carbon fibre. Thanks to its medium viscosity and adhesion, it is widely used for manufacturing and repairing laminates. It has very good UV stability. Recommended for sports equipment, surfboards, or coatings for 3D-printed parts.
Català
Español
