SILCLEAR 22 AB
Addition Silicone (platinum), more durability over time and greater tear resistance. Recommended for many copies or prototyping. The best Resineco silicone
There are 173 products.
Addition Silicone (platinum), more durability over time and greater tear resistance. Recommended for many copies or prototyping. The best Resineco silicone
Buy here the base of the Jesmonite AC100 resin separately, in the format you need, either because you have missed it or because you make a different mixture than recommended to achieve different results. Select the size according to your need
Apply the Peel ply to the entire surface you want to separate from the fiberglass / carbon and other consumables.
Thick weight. For repairs that require thickness, or a large number of layers. It can also be combined with finer weights or in some cases with 500gr Roving for maximum strength. Valid for polyester or epoxy
Premium TR 104 high temperature wax is a high production paste formulated to work in temperature curing processes.
Gelcoat ISO / NPG specific for molds of great detail and durability
Vacuum bag for infusion or vacuum. 65 microns, blue, width 2 meters (folded in half)
Mixing blades for acrylic resins 65 / 35 mm. Thanks to its design, prevents the formation of bubbles and achieve a homogeneous mixture in a few seconds. It adapts easily to any standard drill.
Alginate is a material for quick molds, with water and suitable for reproductions of body parts since it is not toxic and can be in direct contact with the skin.
160gr / m2 fiberglass tape. width 10 cm Sales unit 1 linear meter. (the continuous meters of the same coil are cut)
Brush with wooden handle for all types of work with polyester resins, acrylic resins and paints._x000D_ _x000D_ Format: 1 unit
Flat fabric of 130 gr / m2 Format: 1 ML (width 1000mm) ideal for work with polyester resin or epoxy resin
Resin indicated for uses in which adhesion to expanded polystyrene "porex" / "white cork" is required as it does not attack or undo it. Ideal for scenographies, sets and labels.
Low density polyethylene spiral, for resin distribution in an infusion system.
Catalyst for polyester resins and gelcoats. Usual ratio 1.25 to 2%. Always consult the resin technical data sheet.
Sealing tape for the vacuum bag, 15 meter roll, ideal for resin infusion, vacuum compaction and sealing all joints, from the bag to the pump, through the resin trap.
200gr / m2 fiberglass tape. width 5 cm Sales unit 1 linear meter. (the continuous meters of the same coil are cut)
Suitable for small vacuum systems, it saves resin by having a smaller inside diameter.
Flat fabric of 80 gr / m2 Format: 1 ML (width 1M) ideal for work with polyester resin or epoxy resin
Get more work time with the retarder for Jesmonite AC100, AC200, AC300 resin references. Recommended mixing ratio of 2 to 8 grams per kg of mixture.
Silicone for all types of reproductions. ShoreA 40. Specially formulated for food applications.
Silicone RTV (Room Temperature Vulcanization) of high viscosity (thixotropic) special for large molds applied by layers. Requires THIX additive to control viscosity.
Structural filler of cut fiberglass chopped strands. To reinforce resins of polyester, epoxy and acrylic resin Jesmonite.