English GB
Jesmonite AC100 is the ideal resin to give life to your creativity. It is an alternative to polyester or polyurethane for all kinds of decorative pieces. Ideal with silicone molds.
Take advantage of the special February price on 1.75 kg kits with a 20% discount
Acrylic pigment for Jesmonite resin. It is applied to a maximum of 2% by weight. With the AC100 resin the most vivid colors are obtained by having a higher acrylic resin content.
Pigments are sold by weight and each color has a different density, so for some colors it may appear that the bottle is only half full. Especially white, oxides and terracotta.
Jesmonite AC84 is a two-component, water-based acrylic resin, perfect for creating stone-like pieces from molds. Known for its high durability and precise detail reproduction, it offers a realistic stone finish without the heavy weight. Easy to use, customizable with pigments, and safe, as it emits no toxic fumes. Ideal for sculptors, designers, and creators of artistic and decorative pieces.
Case with all the official Jesmonite pigments in 10gr presentation, for AC100, AC300 and AC84
includes:
The first 100% biodegradable plant-based resin! Linseed oil-based resin and a natural activator based on sugar beet molasses: an innovative, safe, and sustainable way to create your own decorative, utilitarian, and artistic objects. Using Reslin® is simple and creative, without harmful substances! Your pieces will be ready in 60 minutes at a low temperature in the convection oven. These Reslin® sets contain enough material to create multiple Reslin® objects. They are ideal for both small and big projects. Create endless possibilities with Reslin®!
Mineral pigments with neon-colored base. Perfect for use with Jesmonite AC100/AC200/AC300. You can give free rein to your creativity with really bright colors (neon effect).
Please note: does not light up in the dark! No fluorescent pigments.
Mix this glow in the dark pigment with Reslin® and create your own glow in the dark artwork. Gives a glow in the dark effect when properly charged and used in a very dark room.
Natural glitter made from mica slate grit, which contains no plastic. You can sprinkle it into your mold or mix it through your Reslin® to add a beautiful shine to your creation.
Size 15 GR
Reslin® Tint is a highly pigmented, solvent-based, high-coverage ink. Add a few drops of Reslin® Tint to the Reslin® mixture to color it. You'll get vibrant, high-coverage colors. vol 20ml
Whatsapp
English GB
Set of basic consumables for making your first resin infusion or for a small project or repair. Materials for 1m2.
The simplest and most economical solution for an effective resin trap
SR 8100 epoxy resin with SD 8824 hardener (Standard) specifically for resin infusion.
Apply Peel ply to the entire surface you wish to separate from the fibreglass/carbon and other consumables.
Perforated polyethylene film that peels off most resin systems:
Infusion or vacuum bag. 50 microns, orange, width 50 cm (tubular).
tube mesh Yb1 infusion inlet
1.5 m x 100 m COMPLEX mesh integrates drainage mesh and perforated film, and can even be used without Peel Ply, saving time, resin and effort when separating consumables from the finished piece.
Flowmesh is a drainage mesh that is perfect for learning, thanks to its flexibility and ease of application. It comes with black weft threads that indicate the optimal direction of resin flow. Thanks to its great flexibility, it is the most recommended mesh for small surfaces with complicated, angular areas.
Sealing tape for vacuum bags, 15-metre roll, ideal for resin infusion, vacuum compaction and sealing all joints, from the bag to the pump, including the resin trap.
Vacuum bag for infusion or vacuum sealing. 65 microns, blue, width 2 metres (folded in half).
Clamp/pliers to close off the flow of resin or air in the resin infusion system for composites. Quick and easy total sealing of the hose.
Pyramid for infusion, for 12 mm hose. For connecting the distribution system to the resin inlet and outlet hose. Made of high-density polyethylene.
Removable sealant for fibreglass/carbon. Does not affect the mechanical properties of the infused part.
Low-density polyethylene coil for resin distribution in an infusion system.
Suitable for small vacuum systems, it saves resin by having a smaller internal diameter.
155 mm long wooden sticks for mixing all types of resins. Pack of 25 units.
Català
Español
