AC300 (casting)

AC300 is the solution for casting and moulding acrylic resin in moulds to obtain solid pieces at a lower cost than AC100. You can cast pieces of any size.

Get more working time with the retarder for resin referencesJesmonite, AC100, AC200, AC300. Recommended mixing ratio of 2 to 8 grams per kilogram of mixture.

Mixing blades for acrylic resins, 65 or 35 mm. Thanks to their design, they prevent the formation of bubbles and achieve a homogeneous mixture in a few seconds. They fit any standard drill.

Jesmonitee acrylic sealant to protect parts made with Jesmonite AC100, AC200 and AC300.

Purchase the Jesmonite AC300 resin liquid separately, in the format you require, either because you have run out or because you are making a different mixture than the one recommended to achieve different results.

Acrylic sealant with GLOSS finish for Jesmonite to protect parts made with Jesmonite AC100, AC200 and AC300.

60x40cm silicone mat, ideal for working with any resin, easy to clean.

Case containing all official pigments Jesmonite in 10 g presentations, for AC100, AC300 and AC84

Includes: 

• 2 x 10 g Black 
• 2 x 10 g White
• 1 x 10 g Bright Yellow
• 1 x 10 g Rust Yellow
• 1 x 10 g Orange
• 1 x 10 g Terracotta
• 1 x 10 g Coade (brown)
• 1 x 10 g Green
• 1 x 10 g Blue
• 1 x 10 g Lilac
• 1 x 10 g Pink
• 1 x 10 g Bright Red
• 1 x 10 g Rust Red

155 mm long wooden sticks for mixing all types of resins. Pack of 25 units.

Powerful and environmentally friendly detergent. Safe for cleaning all types of moulds. Removes JESMONITE residues, pigments, glitter and metallic powders from the mould.

Jesmonite spray varnish for parts. Gloss finish. 

Easy to apply. 150 ml format.

Jesmonite spray varnish for parts. Matt finish

Easy to apply. 150 ml format

The vibrating platform is extremely helpful for removing bubbles from moulds, achieving a homogeneous mixture and improving the results of all your pieces with Jesmonite. You can also use it when making silicone moulds to ensure that the silicone reaches even the smallest corners.

Glitter chips are as fine as sand, but also slightly thicker, up to about 3 mm, and can be mixed excellently with Jesmonite or other resins. Glitter chips give your creation an elegant and eye-catching finish!

Perfect for use with JESMONITE AC100

Format 30g

The silver flakes are so fine and soft and can be mixed excellently with Jesmonite or other resins. Achieve an elegant and striking end result!

Perfect for use with JESMONITE AC100

5g format

Case with 10 officialJesmonitepigments in 50g packs, for AC100, AC300 and AC84

Includes: 

1 x 50 g Black 

1 x 50 g White

1 x 50 g Bright Yellow

1 x 50 g Rust Yellow

1 x 50 g Terracotta

1 x 50 g Coade (coffee)

1 x 50 g Green

1 x 50 g Blue

1 x 50 g Bright Red

1 x 50 g Rust Red