English GB
Jesmonite AC100 is the ideal resin to bring your creativity to life. It is an alternative to polyester or polyurethane for all types of decorative pieces. Ideal for use with silicone moulds.
Take advantage of February's special price on 1.75 kg kits with a 20% discount.
Acrylic pigment for Jesmonite resin. Apply a maximum of 2% by weight. AC100 resin produces the most vivid colours as it has a higher acrylic resin content.
Pigments are sold by weight and each colour has a different density, so it may appear that some colours are only half full. This is particularly true of white, oxides and terracotta.
Jesmonite AC84 is a two-component water-based acrylic resin, ideal for creating stone-finished pieces from moulds. Its high resistance and detail fidelity allow for durable and realistic results, with a texture that simulates natural stone, but without the actual weight. It is easy to use, customisable with pigments and safe as it does not emit toxic vapours. Perfect for sculptors, designers and creators of artistic and decorative pieces.
Case containing all official pigments Jesmonite in 10 g presentations, for AC100, AC300 and AC84
Includes:
The first 100% biodegradable resin of plant origin! Resin based on linseed oil and a natural activator based on sugar beet molasses: an innovative, safe and sustainable way to create your own decorative, utilitarian and artistic objects. Reslin® is easy and creative to use, with no harmful substances! Your pieces will be ready in 60 minutes at a low temperature in a convection oven. These Reslin® sets contain enough material to create multiple Reslin® objects. They are ideal for both small and large projects. Create endless possibilities with Reslin®!
Neon-based mineral pigments. Perfect for use with Jesmonite AC100/AC200/AC300. You can unleash your creativity with truly striking colours (neon effect).
Please note: does not glow in the dark! No fluorescent pigments.
Very fine mineral powder in beautiful, bright pearlescent colours. Mix the mica powder with Reslin® to give your objects a shiny pearlescent effect.
Format: 9 g
Mix this glow-in-the-dark pigment with Reslin® and create your own glow-in-the-dark artwork. It provides a glow-in-the-dark effect when properly charged and used in a dark room.
Format: 10 g
Natural glitter made from mica slate grain, which does not contain plastic. You can sprinkle it into your mould or mix it with your Reslin® to add a beautiful shine to your creation.
15 g format
Reslin® Tint, highly pigmented, solvent-based and with excellent coverage. Add a few drops of Reslin® Ink to the Reslin® mixture to colour it. You will obtain very vivid colours with excellent coverage. Size: 20 ml.
Whatsapp
English GB
Filter By
Discover Jesmonite, the world's leading non-toxic resin that is replacing solvent-based systems thanks to its safety and versatility.
This water-based system is completely free of toxic substances, fire-resistant and very easy to use for silicone moulds and moulding.
As Jesmonite Store Barcelona, we offer you an official guarantee and specialised technical advice.
Discover mold making silicone, also known as RTV silicone (Room Temperature Vulcanization), the most widely used professional material for creating high-precision flexible molds.
This liquid silicone for molds cures with a catalyst at room temperature and forms an elastic, durable material with excellent non-stick properties, ideal for reproducing parts with full detail.
At Resineco you will find RTV silicones for all types of applications: from silicone for resin molds to formulations for large molds, food contact or low-melting metal casting.
Professional epoxy resins for art, wood, jewellery, fibreglass and industrial applications. Discover transparent, fast, slow and technical epoxy resins, organised by use so you can easily choose the most suitable one for your project.
Discover polyester resin, one of the most widely used materials in the world of composites for fiberglass laminates, molds and technical castings.
This fiberglass resin stands out for its high mechanical strength, ease of application and excellent value for money, making it an ideal solution for both professional applications and technical projects.
At Resineco you will find a wide range of polyester resins adapted to different uses: from structural fiberglass laminates to decorative castings or specific formulations for materials such as Porex.
Active filters
Silicone mould in the shape of a hexagonal tray, 10 cm wide.
Ideal for resin reproductions of all kinds, especially epoxy and Jesmonite.
Jesmonite AC100 is the ideal resin to bring your creativity to life. It is an alternative to polyester or polyurethane for all types of decorative pieces. Ideal for use with silicone moulds.
Take advantage of February's special price on 1.75 kg kits with a 20% discount.
Silicone mould in the shape of an oval tray, 17.5 cm long and 9 cm wide
Ideal for resin reproductions of all kinds, especially epoxy and Jesmonite.
Acrylic pigment for Jesmonite resin. Apply a maximum of 2% by weight. AC100 resin produces the most vivid colours as it has a higher acrylic resin content.
Pigments are sold by weight and each colour has a different density, so it may appear that some colours are only half full. This is particularly true of white, oxides and terracotta.
10 cm square coaster-shaped silicone mould
Ideal for resin reproductions of all kinds, especially epoxy and Jesmonite.
AC730 is the ideal resin for fibreglass-reinforced decorative mouldings, ornaments and all types of sculptures. It is suitable for outdoor use and available in a wide range of stone finishes. It can be used for small castings, although it performs best in fibreglass laminates.
Case containing all official pigments Jesmonite in 10 g presentations, for AC100, AC300 and AC84
Includes:
Silicone mould in the shape of a round coaster, 8 cm in diameter
Ideal for resin reproductions of all kinds, especially epoxy and Jesmonite.
Neon-based mineral pigments. Perfect for use with Jesmonite AC100/AC200/AC300. You can unleash your creativity with truly striking colours (neon effect).
Please note: does not glow in the dark! No fluorescent pigments.
Silicone mould in the shape of mini plant pots. The pieces are a maximum of 5.5 cm wide and 4.5 cm high.
Ideal for all types of resin reproductions, especially epoxy and Jesmonite.
*Pieces not included.
Silicone mould in the shape of a square coaster with a 10 cm rim
Ideal for resin reproductions of all kinds, especially epoxy and Jesmonite.
The Jesmonite Sealer – Acrylic SEALER with satin finish is a water-based acrylic protective coating specially formulated for Jesmonite surfaces. It provides water resistance, stain protection, and an elegant satin finish that enhances the natural color of your pieces. Ideal for decorative objects, trays, pots, and handcrafted creations.
Acrylic sealant with GLOSS finish for Jesmonite to protect parts made with JesThe Jesmonite Sealer – Acrylic GLOSS SEALER with glossy finish is a water-based acrylic sealer designed to protect and enhance Jesmonite surfaces. Provides water and stain resistance with an intense glossy finish that highlights colors and details. Ideal for trays, pots, decorative objects, and artistic creations.monite AC100, AC200 and AC300.
Round coaster-shaped silicone mould with an 8 cm diameter rim
Ideal for resin reproductions of all kinds, especially epoxy and Jesmonite.
Silicone mould in the shape of a cactus. The piece is 6.5 cm high.
Ideal for resin reproductions of all kinds, especially epoxy and Jesmonite.
*The piece is not included.
Pack containing everything you need to start working with JESMONITE AC100:
JESMONITE, 2 silicone moulds and YELLOW, RED and BLUE pigments.
Silicone stick for mixing all types of resins. Very easy to clean and reuse to avoid waste.
Thickening additive "Thixotropic" for resin referencesJesmonite, AC100, AC200, AC300. Prevents sagging. Saves time and material. Recommended mixing ratio of 2 to 6 grams per kilogram of mixture.
Mixing blades for acrylic resins, 65 or 35 mm. Thanks to their design, they prevent the formation of bubbles and achieve a homogeneous mixture in a few seconds. They fit any standard drill.
Acid for removing the surface layer of acrylic resin in applications with stone fillers. This achieves a finish with more filler particles visible.
Structural load of chopped fibreglass strands. For reinforcing polyester, epoxy and acrylic resins Jesmonite.
Extends working time with the retarder for resin referencesJesmonite, AC730, and AC730 FLEX. Recommended mixing ratio of 2 to 8 grams per kilogram of mixture.
Fibreglass specifically designed for Jesmonite AC100 and AC730 resins. This type of glass reinforcement has been custom-designed for use with Jesmonite. Very easy to adapt and work with. Fireproof.
Català
Español
Português PT
