AC100 (decoration and reinforcements)

Jesmonite AC100 is the ideal resin to bring your creativity to life. It is an alternative to polyester or polyurethane for all types of decorative pieces. Ideal for use with silicone moulds.

Take advantage of February's special price on 1.75 kg kits with a 20% discount.

Pack containing everything you need to start working with JESMONITE AC100:

JESMONITE, 1 silicone mould and pigments. 

Pack containing everything you need to start working with JESMONITE AC100:

JESMONITE, 1 silicone mould and pigments. 

Pack containing everything you need to start working with JESMONITE AC100:

JESMONITE, 1 silicone mould and pigments. 

Pack containing everything you need to start working with JESMONITE AC100:

JESMONITE, 1 silicone mould and pigments. 

Acrylic pigment for Jesmonite resin. Apply a maximum of 2% by weight. AC100 resin produces the most vivid colours as it has a higher acrylic resin content.

Pigments are sold by weight and each colour has a different density, so it may appear that some colours are only half full. This is particularly true of white, oxides and terracotta.

Case containing all official pigments Jesmonite in 10 g presentations, for AC100, AC300 and AC84

Includes: 

• 2 x 10 g Black 
• 2 x 10 g White
• 1 x 10 g Bright Yellow
• 1 x 10 g Rust Yellow
• 1 x 10 g Orange
• 1 x 10 g Terracotta
• 1 x 10 g Coade (brown)
• 1 x 10 g Green
• 1 x 10 g Blue
• 1 x 10 g Lilac
• 1 x 10 g Pink
• 1 x 10 g Bright Red
• 1 x 10 g Rust Red

Purchase the Jesmonite AC100 resin liquid separately here, in the format you require, either because you have run out or because you are making a different mixture than the one recommended to achieve different results.

Pack containing everything you need to start working with JESMONITE AC100:

JESMONITE, 2 silicone moulds and YELLOW, RED and BLUE pigments.

Pack containing everything you need to start working with JESMONITE AC100:

Jesmonitee acrylic sealant to protect parts made with Jesmonite AC100, AC200 and AC300.

Acrylic sealant with GLOSS finish for Jesmonite to protect parts made with Jesmonite AC100, AC200 and AC300.

Mixing blades for acrylic resins, 65 or 35 mm. Thanks to their design, they prevent the formation of bubbles and achieve a homogeneous mixture in a few seconds. They fit any standard drill.

Thickening additive "Thixotropic" for resin referencesJesmonite, AC100, AC200, AC300. Prevents sagging. Saves time and material. Recommended mixing ratio of 2 to 6 grams per kilogram of mixture.

Get more working time with the retarder for resin referencesJesmonite, AC100, AC200, AC300. Recommended mixing ratio of 2 to 8 grams per kilogram of mixture.

Fibreglass specifically designed for Jesmonite AC100 and AC730 resins. This type of glass reinforcement has been custom-designed for use with Jesmonite. Very easy to adapt and work with. Fireproof.

Kit for applying resins, whether polyester, epoxy or Jesmonite

2 resin-resistant polypropylene (PP) cups

1 pair of size L latex gloves

1 double brush, size 15

2 wooden mixing sticks

Purchase the Jesmonite AC100 resin base separately here, in the format you require, either because you have run out or because you are making a different mixture than the one recommended to achieve different results. Select the size according to your needs.

Metal filler for Jesmonite resins. Available in copper, bronze and brass. 99.9% purity for a spectacular finish.

Silicone stick for mixing all types of resins. Very easy to clean and reuse to avoid waste.

60x40cm silicone mat, ideal for working with any resin, easy to clean.

155 mm long wooden sticks for mixing all types of resins. Pack of 25 units.

Powerful and environmentally friendly detergent. Safe for cleaning all types of moulds. Removes JESMONITE residues, pigments, glitter and metallic powders from the mould.

Jesmonite spray varnish for parts. Gloss finish. 

Easy to apply. 150 ml format.